GMR300659xx0_Cover.ai 2007-02-14 14:07:03 User’s Manual A200 GMR300659EN0 GMR300659EN0 computers.toshiba-europe.com computers.toshiba-europe.
A200 Copyright © 2007 by TOSHIBA Corporation. All rights reserved. Under copyright law, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein. A200 Series Portable Personal Computer User's Manual First edition March 2007 Ownership and copyright of music, video computer programs, databases, etc. are protected by the copyright laws.
A200 Other trademarks and registered trademarks not listed above may be used in this manual. Macrovision License of Notice This product incorporates copyright protection technology that is protected by methods and claims of certain U.S. patents and other intellectual rights owned by Macrovision Corporation, and other rights owners.
A200 n If you use an extension cable with your AC adapter, ensure that the total ampere rating of the products that are plugged into it do not exceed the ampere rating of the extension cable itself. n To help avoid the potential hazard of electric shock, do not connect or disconnect any cables or perform maintenance or reconfiguration of this product during an electrical storm. n When setting up the computer for work, place it on a level surface. n Do not dispose of batteries in a fire. They may explode.
A200 n Do not use the telephone to report a gas leak in the vicinity of the leak. n Use only the power cord indicated in this manual. n Replace only with the same or equivalent type battery recommended by the manufacturer. n Dispose of used batteries according to the manufacturer's instructions. n To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord. Use only the battery pack that came with the computer or an optional battery pack.
A200 This symbol may not stick depending on the country and region where you purchased. Optical Disc Drive Safety Instruction A A200 computer is shipped with one of the following drives preinstalled: DVD-ROM, CD-RW/DVD-ROM, or DVD Super Multi (+-R DL) drive. n The optical disc drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
A200 Manufacturer Type Toshiba Samsung CD-RW/DVD ROM TS-L-462D Teac CD-RW/DVD ROM DW-224E Pioneer DVD Super Multi (±R Double Layer) DVR-K17 Toshiba Samsung DVD Super Multi (±R Double Layer) TS-L632 Hitachi DVD Super Multi (±R Double Layer) GSA-T20N Panasonic DVD Super Multi (±R Double Layer) UJ-850U Teac DVD Super Multi (±R Double Layer) DV-W28EC Modem warning notice Conformity Statement The equipment has been approved to [Commission Decision "CTR21"] for pan- European single terminal conne
A200 Network Compatibility Statement This product is designed to work with, and is compatible with the following networks. It has been tested to and found to confirm with the additional requirements conditional in EG 201 121.
A200 n Extreme heat, cold, or humidity. n Liquids and corrosive chemicals. Stress injury Carefully read the Instruction Manual for Safety and Comfort. It contains information on the prevention of stress injuries to your hands and wrists that can be caused by extensive keyboard use. Chapter 3, Getting Started, also includes information on work space design, posture and lighting that can help reduce physical stress. Heat injury n Avoid prolonged physical contact with the computer.
A200 Table of Contents Chapter 1 A200 Features Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Special features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7 TOSHIBA Value Added Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8 Utilities and Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9 Options . . . . . . . . . . . . . . . . . . . . . . . . .
A200 Chapter 4 Operating Basics Using the TouchPad/Dual Mode Pad . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Dual Mode Pad Button function (Dual Mode Pad is provided with some models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Using the Web Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 Using the internal modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5 LAN . . . . . . . . . . . . . . . . . . . . . . . . .
A200 Chapter 8 Optional Devices Express Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1 SD/SDHC/MMC/MS/MS Pro/xD Memory cards . . . . . . . . . . . . . . . . . . 8-3 Memory expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6 Additional battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9 Additional AC adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A200 Preface Congratulations on your purchase of the A200 computer. This powerful notebook computer provides excellent expansion capability, including multimedia devices, and it is designed to provide years of reliable, highperformance computing. This manual tells how to set up and begin using your A200 computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.
A200 Chapter 6, Power and Power-Up Modes, gives details on the computer's power resources. Chapter 7, HW Setup, introduces you to the TOSHIBA Hardware Setup program. Chapter 8, Optional Devices, describes the optional hardware available. Chapter 9, Troubleshooting, provides helpful information on how to perform some diagnostic tests, and suggests courses of action if the computer doesn't seem to be working properly. Chapter 10, Disclaimers, provides disclaimer information related to your computer.
A200 Display Names of windows or icons or text generated by the computer that appears on its display screen is presented in the type face you see to the left. ABC Messages Messages are used in this manual to bring important information to your attention. Each type of message is identified as shown below. Pay attention! A caution informs you that improper use of equipment or failure to follow instructions may cause data loss or damage your equipment. Please read.
A200 n TOSHIBA Assist n TOSHIBA SD Memory Card Format* n TOSHIBA Acoustic Silencer n TOSHIBA HW Setup n TOSHIBA Value Add Package Utility n TOSHIBA Supervisor Password Utility n Ulead DVD MovieFactory® n Online Manual * The availability of this software is dependent on the model you purchased. The system may not function properly if you use drivers that are not preinstalled or distributed by TOSHIBA. SD Memory Card Format Utility and other SD functions are packaged into TOSHIBA SD Memory Utilities.
A200 Features Chapter 1 A200 Features This chapter identifies the computer's special features, options and accessories. Some of the features described in this manual may not function properly if you use an operating system that was not pre-installed by TOSHIBA. Features Please visit your region's web site for the configuration details of the model that you have purchased.
A200 Features Memory The graphics system in your computer may use part of the main system memory for graphics performance and therefore reduce the amount of system memory available for other computing activities. The amount of system memory allocated to support graphics may vary depending on the graphics system, applications utilized, system memory size and other factors.
A200 Features Power Battery Pack 3-cell Lithium Ion smart battery pack with 10.8V*2000mAh* 6-cell Lithium Ion smart battery pack with 10.8V*4000mAh 9-cell Lithium Ion smart battery pack with 10.8V*6000mAh Approximately 12 hours or longer charging time to 100% battery capacity with system switched on. Approximately 4 hours charge time to 100% battery capacity with system switched off. Approximately 1.5 days discharging time in Sleep Mode for the 9-cell battery, 1 day for the 6-cell battery and 0.
A200 Features TouchPad/Dual Mode Pad A TouchPad/Dual Mode Pad and control buttons in the palm rest enable control of the on-screen pointer. The Dual Mode Pad is a TouchPad that provides normal touchpad features in its default mode and switches to a DualMode interface when the upper right corner of the TouchPad is tapped. Tapping the same corner again will revert to normal pointing mode. The volume control on the right side of the TouchPad and print button may not function with some applications.
A200 Features Disclaimer (HDD Drive Capacity) For more information on the Disclaimer regarding HDD Drive Capacity, please refer to the Disclaimers section in Chapter 10. Computers in this series can be configured with multiple types of optical disc drive. For more information on the optical disc drives available, talk to your dealer. More information on using the optical disc drive can be found in Chapter 4, Operating Basics.
A200 Features Sound system The integrated Windows® compatible sound system provides support for internal speakers as well as jacks for an external microphone and headphones. Headphone jack A standard 3.5mm stereo jack is provided for the connection of external headphones or speakers. Microphone jack A standard 3.5 mm mini microphone jack enables connection of monaural microphone input.
A200 Features Special features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. User’s Manual TOSHIBA Value Added Package Key combinations that let you quickly modify the system configuration directly from the keyboard without running a system configuration program.
A200 Features Hibernation This feature lets you turn off the power without exiting from your software. The contents of main memory are saved to the hard disk. When you turn on the power again, you can continue working right where you left off. Refer to the Turning off the power section in Chapter 3, Getting Started, for details. Sleep In Sleep Mode, power to the system remains on, but the processor and all other devices are effectively in 'sleep mode'.
A200 Features TOSHIBA Accessibility The TOSHIBA Accessibility utility provides support to movement impaireed users when they need to use the TOSHIBA Hot-key functions. In use, the utility allows you to make the Fn key ‘sticky’, that is you can press it once, release it, and they press one of the "F" keys in order to access its specific function. When set, the Fn key will remain active until another key is pressed.
A200 Features TOSHIBA Hardware Setup This program lets you customize your hardware settings according to the way you work with your computer and the peripherals you use. To access this utility, click Start, point to All Programs, point to TOSHIBA, point to Utilities and click HWSetup. CD/DVD Drive Acoustic Silencer This utility allows you to configure the read speed of CD drive.
A200 Features User’s Manual AC adapter If you use your computer at more than one site frequently, it may be convenient to purchase an additional AC adapter for each site so you will not have to carry the adapter with you. USB Floppy Disk Drive Lets you attach a floppy disk drive to your computer by means of a USB cable.
The Grand Tour Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Certain types of notebook chassis are designed to accommodate all possible configurations for an entire product series. Your selected model may not have all the features and specifications corresponding to all of the icons or switches shown on the notebook chassis, unless you have selected all those features.
The Grand Tour DC IN LED The DC IN LED indicates the computer is connected to the AC adapter and it is plugged into an AC power source. Power LED In normal operating mode, the Power LED is blue (depending on the model you purchased). If the system is in Sleep Mode the LED will flash amber, while the LED will be off when the computer is turned off or is in Hibernation Mode. Battery LED The Battery LED indicates the battery's current charge/discharge status.
The Grand Tour Headphone Jack The headphone jack lets you connect stereo headphones or other audio-output devices such as external speakers. Connecting headphones or other devices to this jack automatically disables the internal speakers. Volume Control Use this dial to adjust the volume of the stereo speakers or headphones. Right side The following figure shows the computer's right side. 1 1. 2. 3. 4. 2 3 Universal Serial Bus (USB) Ports Modem Jack* Optical Disc Drive Optical Disc Drive LED 4 5.
The Grand Tour Optical Disc Drive LED This indicator lets you know when the Optical Disc Drive is being accessed. Eject Button Opens the Optical Disc Drive. Emergency Eject Hole A back-up for the Eject Button. DC IN Jack The DC IN jack is where you plug in the AC adapter. Security Lock An optional security cable attaches to this port in order to anchor your computer to a desk or other large object to deter theft. Left side The following figure shows the computer's left side. 1 2 1. 2. 3. 4.
The Grand Tour LAN Jack This jack lets you connect to a LAN. The adapter has built-in support for Ethernet LAN (10 Mbps, 10BASE-T), Fast Ethernet LAN (100 Mbps, 100BASE-TX). Two indicators built into the jack let you see the LAN status. Universal Serial Bus (USB) Ports The Universal Serial Bus (USB 2.0 and 1.1 compatible) port enables USB-equipped devices such as keyboards, mice, hard drives, scanners, and printers to be connected to the computer.
The Grand Tour Underside The following figure shows the underside of the computer. Make sure the display is closed before turning over your computer. 1 2 7 3 6 4 5 1. 2. 3. 4. Expansion Memory Socket HDD1 Battery Pack Lock Battery Pack 5. 6. 7. Battery Pack Latch Fan Vent HDD2 The bottom of the computer User’s Manual Expansion Memory Socket Use this socket to install a memory module to increase your computer's memory. Refer to the Memory expansion section in Chapter 8, Optional Devices.
The Grand Tour Fan Vent The fan vent helps prevent the CPU from overheating. To prevent possible overheating of the CPU, never block the fan vents. Front with the display open The following figure shows the front of the computer with the display open. To open the display, push the latch on the front of the display and lift it up. Position the display at a comfortable viewing angle. 12 13 5 1 6 7 8 9 10 11 2 3 4 1. 2. 3. 4. 5. 6. 7.
The Grand Tour To prolong the life of your display screen, use a screen saver when you're not using the computer and it is idle. Left and Right Speakers The computer provides two speakers for stereo sound reproduction. TouchPad/Dual Mode The TouchPad/Dual Mode Pad pointing device is Pad located in the centre of the palm rest and is used to control the on-screen pointer. Refer to the Using the TouchPad/Dual Mode Pad section in Chapter 4, Operating Basics.
The Grand Tour Next Button* Skips forward to the next track, chapter or digital file. Refer to Chapter 4, Operating Basics, for details. (The availability of this function depends on the model you purchased.) Web Camera Power LED* Web Camera Power LED indicates Web Camera is working or not. (The availability of this function depends on the model you purchased.) Web Camera* Take your picture or send your image to web contacts. (The availability of this function depends on the model you purchased.
The Grand Tour Optical Disc drive The computer has a dual layer DVD Super Multi drive supporting ±R Double Layer. An ATAPI interface controller is used for the operation of these optical drives. When the computer is accessing a disc, an indicator on the drive glows. Region codes for DVD drives and media The disc drive and its media are manufactured according to the specifications of six marketing regions. When you purchase DVD-Video, make sure it matches your drive, otherwise it will not play properly.
The Grand Tour DVD Super Multi drive supporting ±R Double Layer The full-size DVD Super Multi drive supporting ±R Double Layer module lets you record data to rewritable discs as well as run either 12cm (4.72") or 8cm (3.15") discs without using an adapter. The read speed is slower at the centre of a disc and faster at the other edge.
The Grand Tour AC Adapter (3-pin plug) Use of the wrong adapter could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 19 volts DC. Please use only the AC Adapter supplied with the computer or an AC adapter certified by TOSHIBA.
Getting Started Chapter 3 Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: Be sure also to read Instruction Manual for Safety & Comfort. This guide, which is included with the computer, explains product liability.
Getting Started 1. Connect the power cord to the AC adapter. Connecting the power cord to the AC adapter 2. Connect the DC output plug on the AC adapter to the DC IN input port on the back of the computer. Connecting the adapter to the computer 3. Plug the power cord into a live wall outlet. The Battery and DC IN indicators on the front of the computer should glow. To disconnect AC adaptor, you can follow the reversed procedure of Connecting AC adaptor.
Getting Started 2. Lift the panel up and adjust it to the best viewing angle for you. Use reasonable care when opening and closing the display panel. Opening it vigorously or slamming it shut could damage the computer. Turning on the power This section describes how to turn on the power. After you turn on the power for the first time, do not turn it off until you have set up the operating system. Refer to the section Starting up for the first time in this chapter. 1.
Getting Started Turning off the power The power can be turned off in one of three modes, either Shutdown (Boot) Mode, Hibernation Mode or Sleep Mode. Shut Down mode (Boot mode) When you turn off the power in Shut Down mode no data will be saved and the computer will boot to the operating system's main screen the next time it is turned on. 1. If you have entered data, either save it to the hard disk, drive or to other storege media. 2.
Getting Started n When the AC adaptor is connected, the computer will go into Sleep Mode according to the settings in the Power Options. n To restore the operation from the computer from Sleep Mode, press the power button or press any key. Please be aware that this latter action only works on the internal keyboard if the. Wake-up on Keyboard option is enabled within the HW Setup utility.
Getting Started 3. Press the power button. Please note that this feature must be enabled please refer to the Power Options (to access it, click Start followed by Control Panel followed by System and Maintenance and then click the Power Options then select Choose what closing the lid does). When you turn the power back on, you can continue where you left when you shutdown the computer. n When the computer is in Sleep Mode, the power indicator will blink orange.
Getting Started Starting Hibernation Mode You can also enable Hibernation Mode by pressing Fn + F4 - please refer to Chapter 5, The Keyboard, for further details. To enter Hibernation Mode, follow the steps below. 1. Click Start. 2. Click the arrow button ( ) in the power management buttons ( ). 3. Select Hibernate from the menu. Automatic Hibernation Mode The computer can be configured to enter Hibernate Mode automatically when you press the power button or close the lid.
Getting Started 3. Press the power button and hold it down for five seconds. Once the computer has turned itself off, wait between ten and fifteen seconds before turning the power on again by pressing the power button. System Recovery Options About 1.5GB hidden partition is allocated on the hard disk drive for the System Recovery Options.This partition stores files which can be used to repair the system in the event of a problem.
Getting Started Restoring the preinstalled software from the Product Recovery disc If preinstalled files are damaged, use the Product Recovery disc to restore them. To restore the operating system and all preinstalled software, follow the steps below. When you reinstall the Windows operating system, the hard disk will be reformatted and all data will be lost. You can not use System Recovery Options if restoring the pre-installed software without System Recovery options. 1.
Operating Basics Chapter 4 Operating Basics This chapter gives information on basic operations including using the TouchPad/Dual Mode Pad, optical disc drives, the internal modem, LAN and wireless LAN. It also provides tips on caring for your computer and on heat dispersal. Using the TouchPad/Dual Mode Pad To use the TouchPad/Dual Mode Pad, simply move your finger tip across it in the direction you want the on-screen pointer to go. 1. TouchPad control buttons 2.
Operating Basics Do not press on the TouchPad/Dual Mode Pad too hard or press a sharp object such as a ball point pen against it. The TouchPad/Dual Mode Pad could be damaged. The TouchPad/Dual Mode Pad has similar functions to a two-button mouse with a scroll wheel. For some functions, you can tap it instead of pressing a button. You can customize pointing device actions in Mouse Properties. Open the Control Panel, select the Mouse icon and press Enter to open the Mouse Properties window.
Operating Basics ConfigFree ConfigFree is a suite of utilities to allow easy control of communication devices and network connections. It also allows you to find communication problems and create profiles for easy switching between locations and communication networks. Windows Vista Photo Windows Vista Photo Gallery gives you many Gallery tools for your digital photos and videos.
Operating Basics Using the software The web camera software is pre-configured to start when you turn on Windows Vista; if you need to restart it go to Start Programs Camera Assistant Software Camera Assistant Software. 1 2 3 4 5 6 8 1. 2. 3. 4. User’s Manual 7 Capture still images Video Recording Audio Recording Function 5. 6. 7. 8. Display Window Camera Resolution Mute Effects Capture Still Images Click to see a preview of the captured image; you can also e-mail the image.
Operating Basics Settings Choose from the: Options tab to change the tool position; the Picture tab to select picture output options such as size, export file and saving location; the Video tab to choose output settings such as Frame Rate, Size, Compression and the file save path; the Audio tab to chnage the Audio Device, Compression, Volume and file save path. Help Displays the help files for the software.
Operating Basics Region selection Telecommunication regulations vary from one country/region to another, so you will need to make sure the internal modem's settings are correct for the country/region in which it will be used. 1. Open the Modem Region Select application. It is located on the Programs menu at TOSHIBA Networking. Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available.
Operating Basics Settings You can enable or disable the following settings: AutoRun Mode Region Select Utility starts automatically when you start up the operating system. Open the Dialing Properties dialog box after selecting region. The dialing properties dialog box will be displayed automatically after you select the region. Location list for region selection. A submenu appears displaying location information for telephony.
Operating Basics 1. Plug one end of the modular cable into the modem jack. 2. Plug the other end of the modular cable into a telephone jack. Connecting the internal modem Do not pull on the cable or move the computer while the cable is connected. If you find that the modem speed is low or communication is interrupted when you are using the modem, please set the CPU speed to Maximum within the Power Options. Disconnecting To disconnect the internal modem cable, follow the steps below. 1.
Operating Basics Connecting the LAN cable The computer must be configured properly before connecting to a LAN. Logging onto a LAN using the computer's default settings could cause a malfunction in LAN operation. Check with your LAN administrator regarding set-up procedures. If you are using Ethernet LAN (10 Mbps, 10BASE-T), you can connect using either a CAT5 or a CAT3 cable. If you are using 100BASE-TX Fast Ethernet or 1000BASE-T Gigabit Ethernet, you must connect using a CAT5 cable.
Operating Basics n n n n Frequency Channel Selection (2.4 GHz or 5 GHz) Roaming over multiple channels Card Power Management Wired Equivalent Privacy (WEP) data encryption 11a, 11b, 11g and 11n wireless are based on IEEE 802.11a, 802.11b, 802.11g and 802.11n respectively. The IEEE 802.11n specification has not been finalized and is currently in draft release. The TOSHIBA 11a/b/g/n Wireless LAN Adapters are based on the Draft Release, Version 1.0, of the IEEE 802.11n specification.
Operating Basics Bluetooth wireless technology Bluetooth™ wireless technology eliminates the need for cables between electronic devices such as desktop computers, printers and mobile phones. Bluetooth wireless technology has the following features: Worldwide operation The Bluetooth radio transmitter and receiver operate in the 2.4 GHz band, which is license-free and compatible with radio systems in most countries in the world. Radio links You can easily establish links between two or more devices.
Operating Basics Product Support: The latest information regarding Operating System support, Language Support or available upgrades can be found on our web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or http://www.pcsupport.toshiba.com in the United States. Wireless communication switch You can enable or disable the wireless LAN function with the on/off switch. No transmissions are sent or received when the switch is off.
Operating Basics Loading optical disc media To load a disc, follow the steps below. 1. Turn on the power. 2. a. Press the eject button to open the drawer slightly. Eject button Pressing the eject button b. Pressing the eject button will not open the drawer when the computer's power is off. If the power is off, you can open the drawer by inserting a slender object (about 15 mm) such as a straightened paper clip into the eject hole just to the right of the eject button.
Operating Basics 4. Lay the disc, label side up, in the drawer. Inserting a disc Be careful not to touch the lens or the area around it. Doing so could cause the drive to malfunction. 5. Press gently at the center of the disc until you feel it click into place. The disc should lie below the top of the spindle, flush with its base. 6. Push the center of the drawer to close it. Press gently until it locks in place. If the disc is not seated properly when the drawer is closed, it might be damaged.
Operating Basics Removing compact discs To remove the disc, follow the steps below. Do not press the eject button while the computer is accessing the disc drive. Wait for the optical disc indicator to go out before you open the drawer. Also, if the disc is spinning when you open it, wait for it to stop before you remove it. 1. To pop the drawer partially open, press the eject button. Gently pull the drawer out until it is fully opened.
Operating Basics 3. Change function of Buttons.
Operating Basics n Any change or loss of the recorded contents of CD-R/RW or DVD-R/RW/ +R/+RW /-RAM media that may be caused by writing or rewriting with this product, or for any business profit loss or business interruption that may be caused by the change or loss of the recorded contents. n Damage that may be caused by using third party equipment or software.
Operating Basics *DVD-RAM DVD Specifications for DVD-RAM Disc for Version 2.0, Version 2.1 or Version 2.2 Matsushita Electric Industrial Co., Ltd. Hitachi Maxell Ltd. *DVD Multi drive and DVD Super Multi can use DVD-RAM. DVD+R (Double Layer) MITSUBISHI CHEMICAL CORPORATION DVD-R (Dual Layer) MITSUBISHI CHEMICAL COPRORATION DVD-R Label Flash FUJIFILM Corporation DVD+R Label Flash FUJIFILM Corporation n If the disc is poor in quality, dirty or damaged, writing or rewriting errors may occur.
Operating Basics n DVD-RAM formatted by FAT32 cannot be read in Windows 2000 without DVD-RAM Driver Software. n When multiple drives that can write data to discs are connected, be careful not to write to the wrong drive. n Be sure to connect the universal AC adapter before you write or rewrite. n Before you enter Sleep/Hibernation Mode, be sure to finish DVD-RAM writing. Writing is finished if you can eject DVD-RAM media. n Be sure to close all other software programs except the writing software.
Operating Basics n Set the computer on a level surface and avoid places subject to vibration such as airplanes, trains or cars. Do not use an unstable surface such as a stand. n Keep mobile phones and other wireless communication devices away from the computer. n Always copy data from the hard disk drive to the CD. Do not use cutand-paste as the original data will be lost if there is a write error. How to make a Label Flash DVD The availabilty of Label Flash DVD depends on the model purchased.
Operating Basics Simplified steps for making a DVD-Video from adding a video source: 1. Click Start All Programs DVD MovieFactory for TOSHIBA Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory. 2. Click Video Disc New Project to invoke 2nd Launcher, choose your project type, then invoke DVD MovieFactory. 3. Add source from HD Disk by click Add Video files button to invoke browser dialog box. 4. Choose the sourse video then go to the Next page to apply Menu. 5.
Operating Basics 2. Before recording the video to DVD: n When you record to DVD disc, please use only discs recommended by the Drive manufacturer. n Do not set the working drive to a slow device like a USB 1.1 hard disk drive or it will fail to write DVD. n Do not perform any of the following actions: n Operate the computer for any other function, including using a mouse or TouchPad/Dual Mode Pad or closing/opening the LCD panel. n Bump or cause vibration to the computer.
Operating Basics n You cannot back up a CD-ROM or CD-R/RW to DVD-R/-RW or DVD+R/+RW using the Disc Backup function of TOSHIBA Disc Ceator n You cannot back up DVD-ROM, DVD-Video or DVD-R/-RW or DVD+R/+RW to CD-R/RW using TOSHIBA Disc Ceator n TOSHIBA Disc Ceator cannot record in packet format. n You might not be able to use the Disc Backup function of TOSHIBA Disc Ceator to backup a DVD-R/-RW or DVD+R/+RW disc that was made with other software on a different DVD-R/-RW or DVD+R/+RW recorder.
Operating Basics Media Care This section provides tips on protecting data stored on your discs and disks. Handle your media with care. The following simple precautions will increase the lifetime of your media and protect the data stored on it: 1. Store your discs in the container they came in to protect them and keep them clean. 2. Do not bend the disc. 3. Do not write on, apply a sticker to, or otherwise mar the surface of the disc that contains data. 4.
Operating Basics TV-Out Use the TV-Out port to connect to a television. Be sure to use a 4 pin type S-video cable. For more details, see Appendix B, Display Modes. TV Out Port Setting up more than one display You can set up your computer to utilize more than one display, effectively spreading a single desktop screen across two monitors. The Display Properties window allows you to adjust more precisely the relative positioning of the two displays when they are configured as an extended desktop.
Operating Basics Cleaning the computer To help ensure long, trouble-free operation, keep the computer free of dust and use care with liquids around the computer. n Be careful not to spill liquids into the computer. If the computer does get wet, turn the power off immediately and let the computer dry completely before you turn it on again. n Clean the computer using a slightly damp (with water) cloth. You can use glass cleaner on the display.
The Keyboard Chapter 5 The Keyboard The computer's keyboard layouts are compatible with a 104/105-key enhanced keyboard. By pressing some keys in combination, all the 104/105-key keyboard functions can be executed on the computer. The number of keys on your keyboard depends on which country/region's keyboard layout your computer is configured with. Keyboards for numerous languages are available.
The Keyboard F1 ... F12 function keys The function keys, not to be confused with Fn, are the 12 keys at the top of your keyboard. These keys are dark gray, but function differently from the other dark gray keys. F1 through F12 are called function keys because they execute programmed functions when pressed. Used in combination with the Fn key, keys marked with icons execute specific functions on the computer. See the section, Soft keys: Fn key combinations, in this chapter.
The Keyboard Press Fn + Ctrl to simulate the enhanced keyboard's right Ctrl key. Hotkeys Fn + ESC Mute – Turns the volume on and off. Fn + F1 Lock – Enters "Lock computer" mode. To restore your desktop, you need to log on again. Fn + F2 Power Plan Mode – Displays the power save modes and lets you change the power settings Fn + F3 Sleep – This hot key switches the system to Sleep mode. Fn + F4 Hibernate – This hot key switches the system to Hibernate mode. Fn + F5 Output – Changes displays.
The Keyboard Fn + 1 Fn + 2 Zoom Out – To reduce the icon size on the desktop or the application window, press the 1 key while holding down the Fn key. Zoom In – To enlarge the icon size on the desktop or the application window, press the 2 key while holding down the Fn key. Windows special keys The keyboard provides two keys that have special functions in Windows Vista™. One activates the Start menu and the other has the same function as the secondary mouse button.
The Keyboard Numeric mode To turn on the Numeric mode, press Fn + F11 (Numeric mode indicator lights). Now try numeric data entry using the keys below. Press Fn + F11 again to turn off the overlay. The numeric keypad overlay (U.S.) Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard without turning off the overlay: 1. Hold down Fn and press any other key. All keys will operate as if the overlay were off. 2.
The Keyboard Temporarily using overlay (overlay off) While using the normal keyboard, you can temporarily use the keypad overlay without turning it on: 1. Press and hold down Fn. 2. Check the keyboard indicators. Pressing Fn turns on the most recently used overlay. If the Numeric mode indicator lights, you can use the overlay for numeric entry. If the Arrow mode indicator lights, you can use it for cursor and page control. 3. Release Fn to return to normal keyboard operation.
Power and Power-Up Modes Chapter 6 Power and Power-Up Modes The computer's power resources include the AC adapter and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes.
Power and Power-Up Modes Power on AC adapter not connected Battery capacity is above low battery trigger point • Operates • LED: Battery off DC IN off Battery capacity is below low battery trigger point • Operates • Alarm sounds (this function depends on how the computer is configured) • LED: Battery flashes amber DC IN off Battery capacity exhausted Computer goes into Hibernation or shuts down (depending on the TOSHIBA Power Saver setting) No battery installed • No operation • LED: Battery off DC
Power and Power-Up Modes DC IN indicator Check the DC IN indicator to determine the power status with the AC adapter connected: Blue Indicates the AC adapter is connected and is correctly supplying power to the computer. No light Indicates the AC adapter is not connected. Power indicator Check the Power indicator to determine the power status with the AC adapter connected: Blue Indicates power is being supplied and the computer is turned on.
Power and Power-Up Modes n The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. n Do not remove the battery pack while the computer is in Sleep Mode. In this mode data is stored in memory, so if the computer loses power, it will be lost.
Power and Power-Up Modes Safety precautions Mishandling of batteries can cause death, serious injury or property damage. Carefully observe the following advice: Danger: Indicates an imminently hazardous situation, which could result in death or serious injury, if you do not follow instructions. Warning: Indicates a potentially hazardous situation, which could result in death or serious injury, if you do not follow instructions.
Power and Power-Up Modes Warning 1. Never allow caustic electrolyte fluid leaked from a battery pack to contact your eyes, skin or clothing. If caustic electrolyte fluid should contact your eyes, immediately wash your eyes with large amounts of running water and seek medical attention, to help prevent eye damage. It electrolyte fluid should contact your skin, immediately wash it under running water to prevent rash.
Power and Power-Up Modes Note 1. Never remove the battery pack while the Wake-up on LAN function is enabled. Data will be lost. Before you remove a battery pack, disable the Wake-up on LAN function. 2. To ensure the battery pack maintains maximum capacity, operate the computer on battery power once a week until the battery pack is fully discharged. Refer to the section Extending battery life in this chapter for procedures.
Power and Power-Up Modes The charging time when the computer is on is affected by ambient temperature, the temperature of the computer and how you use the computer. If you make heavy use of external devices the battery might scarcely charge at all during operation. Refer also to the section Maximizing battery operating time. Battery charging notice The battery may not charge right away under the following conditions: n The battery is extremely hot or cold.
Power and Power-Up Modes Monitoring battery capacity Remaining battery power can be monitored using the following methods. n Clicking the battery icon on the task bar n Via the Battery Stats in the Windows Mobility Center Window n You should wait at least 16 seconds after turning on the computer before trying to monitor the remaining operating time.
Power and Power-Up Modes Retaining data with power off (Sleep mode) When you turn off your computer with fully charged batteries, the batteries retain data/charge for the following approximate time periods: Battery Approximately 1.5 days (Sleep mode, 9-cell) Approximately 1 day (Sleep mode, 6-cell) Approximately 0.
Power and Power-Up Modes 5. Unlock the Battery Pack Lock. 1 2 Removing the battery pack-1 6. Slide the battery pack latch to the left, then pull the battery out of the battery bay.
Power and Power-Up Modes Installing the battery pack To install a battery pack, follow the steps below. The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. 1. Turn the computer's power off. 2. Disconnect all cables connected to the computer. 3.
Power and Power-Up Modes User Password To start the utility, point to or click the following items: Launch: TOSHIBA Assist SECURE User Password n Registered Click to register a password of up to 8 characters. After a password is set, you will be prompted to enter it when you start the computer. n Not Registered Click to delete a registered password. Before you can delete a password, you must first enter the current password correctly.
Power and Power-Up Modes Power-up modes The computer has three power-up modes: n Hibernation (saves data in memory to the hard disk) n Sleep (power remains on, maintaining the data in memory, but the CPU and all other devices effectively enter a 'sleep' mode) n Boot (does not save data in memory) Refer also to the section Turning off the power in Chapter 3, Getting Started.
HW Setup Chapter 7 HW Setup This chapter explains how to use the TOSHIBA HW Setup utility to configure your computer. TOSHIBA HW Setup lets you configure settings for various hardware devices through a number of tabs titled General, Password, Display, Boot Priority, Keyboard, CPU, LAN, and USB.
HW Setup Password This tab allows you to set or reset the user password for power on. Display This tab lets you customize your computer's display settings for either the internal LCD screen or for an external monitor. Power On Display This option allows you to select the display to be used when the computer is switched on. Auto-Selected Selects an external monitor if one is connected. Otherwise, it selects the internal LCD (Default).
HW Setup To select the boot drive you want, follow the steps below. 1. Boot-up your computer and press F12 to enter the boot menu. 2. The boot select screen will be displayed: HDD1, HDD2, CD/DVD, and LAN. 3. Use the upper/lower cursor keys to highlight the boot device you want and press Enter. Keyboard Wake-up on Keyboard When this feature is enabled and the computer is in Sleep mode, you can turn on the computer by pressing any key.
HW Setup Built-in LAN This feature enables or disables the Built-in LAN. User’s Manual Enabled Enables Built-in LAN function (Default). Disabled Disables Built-in LAN function.
Optional Devices Chapter 8 Optional Devices Optional devices can expand the computer's capabilities and its versatility.
Optional Devices Installing an Express Card One Express Card connector is located on the right side of the computer. The computer's hot-install feature lets you install Express Card while the computer's power is on. To install an Express Card, follow the steps below. 1. Insert the Express Card. 2. Press gently to ensure a firm connection.
Optional Devices SD/SDHC/MMC/MS/MS Pro/xD Memory cards The computer is equipped with a multiple digital media card slot that can accommodate SD/SDHC/MMC/MS/MS Pro/xD memory cards. These memory cards let you easily transfer data from devices, such as digital cameras and Personal Digital Assistants, which use flash-memory.
Optional Devices Installing a memory card To install a memory card: 1. Insert the memory card. 2. Press gently to ensure a firm connection. Inserting a memory card Be sure the memory card is oriented properly before you insert it. If Windows® fails to read the card, remove it then re-insert it. The multiple digital media card slot only accepts one type of card at a time. Do not attempt to install more than one card as you risk damaging either the cards themselves or the computer.
Optional Devices n Make sure the memory card indicator is out before you remove the card or turn off the computer's power. If you remove the card or turn off the power while the computer is accessing the card you may lose data or damage the card. n Do not remove the card while the computer is in Sleep or Hibernation mode. The computer could become unstable or data in the memory card could be lost.
Optional Devices Memory expansion You can install additional memory in the computer's memory module socket to increase the amount of RAM. This section describes how to install and remove a memory module. n Before you install or remove a memory module, turn off the computer with the Shut Down option in the Windows Start menu. If you install or remove a memory module while the computer is in Sleep or Hibernation mode, data will be lost.
Optional Devices 5. Slide your fingernail or a thin object under the cover and lift it off. Removing the memory module socket cover 6. Fit the module's connectors into the computer's connectors at about a 45 degree angle and press the module carefully to ensure a firm connection. Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems. 7. Push the module down so it lies flat.
Optional Devices 9. Replace the battery pack as described in Chapter 6, Power and PowerUp Modes. 10. Turn the power on and make sure the added memory is recognized. Removing Memory on Bottom Side If you use the computer for a long time, the memory modules will become hot. In this case, let the memory modules cool to room temperature before you replace them. To remove the memory module, make sure the computer is in boot mode then: 1.
Optional Devices Additional battery pack You can increase the portability of the computer with additional battery packs. If you're away from an AC power source and your battery runs low, you can replace it with a freshly charged battery. See Chapter 6, Power and Power-Up Modes. Additional AC adapter If you frequently carry the computer to different sites such as your home and office, having an AC adapter at each location reduces the weight and bulk of your load.
Optional Devices If a television is connected to the computer, set the TV type in Display Properties. Follow the steps below, based on the configuration of your computer: For Intel 1. Click Start Control Panel Appearance and Personalization> Personalization. 2. Choose Display Settings.
Optional Devices 3. Click the Advanced Setting button. The Generic PnP Monitor and Intel® 945GM Express Chipset Family dialogue box opens. 4. Click the Graphics Properties button.
Optional Devices 5. In the subsequent dialogue box, click Display Devices and then set up your television and notebook displays. For nVidia 1. Click Start Control Panel Personalization. 2. Choose Display Settings.
Optional Devices 3. Click the Advanced Settings button. The Generic PnP Monitor and NVIDIA GeForce Go 7300 Properties dialogue box opens. 4. Click Start the NVIDIA Control Panel.
Optional Devices 5. Click Display item. 6. Click Change Display Configuration item. 7. Setup your television and notebook display.
Optional Devices i.LINK (IEEE1394) i.LINK (IEEE1394) is used for high-speed data transfer for a range of compatible devices such as: n Digital video cameras n Hard disk drives n MO drives n Optical disc drives i.LINK uses a four-pin connector, which does not carry electric current. External devices will need their own power supply. Precautions n Make a back-up of your data before transferring it to the computer. There is a possibility that the original data will be damaged.
Optional Devices Disconnecting 1. Click the Safely Remove Hardware icon on the Task Bar. 2. Point to i.LINK (IEEE1394) device and click. 3. Disconnect the cable from the computer then from the i.LINK device. Refer also to the documentation that came with your i.LINK device. Security lock A security lock enables you to anchor your computer to a desk or other heavy object to help prevent unauthorized removal of the computer.
Troubleshooting Chapter 9 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring. Problem solving process Resolving problems will be much easier if you observe the following guidelines: n Stop immediately when you recognize a problem exists.
Troubleshooting Preliminary checklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. n Make sure you turn on all peripheral devices before you turn on the computer. This includes your printer and any other external device you are using. n Before you attach an external device, turn the computer off. When you turn the computer back on it recognizes the new device.
Troubleshooting Record your observations so you can describe them to your dealer. Software The problems may be caused by your software. If you cannot load a software package, the media may be damaged or the program might be corrupted. Try loading another copy of the software. If an error message appears while you are using a software package, check the software documentation. These documents usually include a problem solving section or a summary of error messages.
Troubleshooting System start-up When the computer does not start properly, check the following items: n Self Test n Power Sources n Power-on Password Self test When the computer starts up, the self test will be run automatically, and the following will be displayed: (This screen image is one of the examples. You may see the different screen image depending on the model you purchased.) This message remains on the screen for a few seconds.
Troubleshooting Power When the computer is not plugged into an AC outlet, the battery pack is the primary power source. However, your computer has a number of other power resources, including an intelligent power supply and Real Time Clock battery. These resources are interrelated and any one could affect apparent power problems. This section provides check lists for AC power and the battery. If you cannot resolve a problem after following them, the cause could lie with another power resource.
Troubleshooting Battery If you suspect a problem with the battery, check the DC IN indicator as well as the indicators for the battery. For information on indicators and battery operation see Chapter 6, Power and Power-Up Modes. Problem Procedure Battery doesn't power the computer. The battery may be discharged. Connect the AC power cord to charge the battery. Battery doesn't charge when the AC power cord is attached. (Battery indicator does not glow amber.
Troubleshooting Keyboard Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 5, The Keyboard. Problem Procedure Some letter keys produce numbers. Check that the numeric keypad overlay is not selected. Press Fn + F10 and try typing again. Output to screen is garbled. Make sure the software you are using is not remapping the keyboard. Remapping involves reassigning the meaning of each key. See your software's documentation.
Troubleshooting Problem Procedure Slow performance Your files may be fragmented. Run SCANDISK and defragmenter to check the condition of your files and disk. Refer to your operating system documentation or online HELP for information on running SCANDISK and the defragmenter. Contact your dealer if the problems continue. Password Problem Procedure Cannot enter password Refer to Chapter 6, Power and Power-Up Modes. i.LINK (IEEE1394) Problem Procedure i.
Troubleshooting Monitor Refer also to Chapter 8, Optional Devices, and to your monitor’s documentation. Problem Procedure Monitor does not turn on Make sure that the external monitor's power switch is on. Confirm that the external monitor's power cable is plugged into a working power outlet. No display Try adjusting the contrast and brightness controls on the external monitor. Press hotkeys Fn + F5 to change the display priority and make sure it is not set for the internal display.
Troubleshooting Pointing device If you are using a USB mouse, also refer to the USB section in this chapter and to your mouse documentation. TouchPad/Dual Mode Pad Problem Procedure On-screen pointer does The system might be busy. If the pointer is not respond to Pad shaped as an hourglass, wait for it to resume its operation normal shape and try again to move it. You may also press Fn + F9 to enable the TouchPad/Dual Mode Pad and then try again to move it.
Troubleshooting Problem Procedure The mouse pointer moves too fast or too slow Try changing the speed setting in the mouse control utility. 1. Open the Control Panel, select the Mouse icon and press Enter. 2. Click the Pointer Options tab. 3. Set the speed as instructed and click OK. The mouse pointer moves erratically The mouse might be dirty. Refer to your mouse documentations for instructions on cleaning. If problems persist, contact your dealer. USB Refer also to your USB device’s documentation.
Troubleshooting LAN Problem Procedure Cannot access LAN or the Wake up on LAN feature does not work Check for a firm cable connection between the LAN hub. Make sure the AC adapter is connected. You cannot access a LAN using the computer's battery power. If problems persist, consult your LAN administrator.
Troubleshooting Modem Problem Procedure Communication software can't initialize the modem Make sure the computer's internal modem settings are correct. Refer to Phone and Modem Options Properties in the Control Panel. You can hear a dial tone If the call is going through a PBX machine, make but can't make a call sure the communication application's tone dial detection feature is disabled.
Troubleshooting CDVD Super Multi drive with double layer disc recording support For more information, refer to Chapter 4, Operating Basics. Problem Procedure You cannot access a disc in the drive Make sure the drive's drawer is securely closed. Press gently until it clicks into place. Open the drawer and make sure the disc is properly seated. It should lie flat with the label facing up. A foreign object in the drawer could block laser light from reading the disc. Make sure there is no obstruction.
Troubleshooting Problem Procedure Some discs run The software or hardware configuration may be correctly, but others do causing a problem. Make sure the hardware not configuration matches your software's needs. Check the disc's documentation. Check the type of disc you are using.
Troubleshooting Real Time Clock Problem Procedure The following message The RTC battery charge has become exhausted, is displayed on the LCD: you should set the date and time in within the BIOS setup screen through the following steps: ERROR 271: Check date 1. Press [F1] key. BIOS setup will boot up. 2. Press [F2] to set the date in and time [System Date]. settings. 3. Press [F2] to set the time in WARNING [System Time]. 0251: System CMOS checksum bad - Default configuration used.
Disclaimers Chapter 10 Disclaimers This chapter states the Disclaimer(s) information applicable to TOSHIBA computers. CPU Central Processing Unit ("CPU") Performance Disclaimer.
Disclaimers 64-Bit Computing. 64-bit processors are designed to take advantage of 32 and 64 bit computing. 64-bit computing requires that the following hardware and software requirements are met: n 64-bit Operating System n 64-bit CPU, Chipset and BIOS (Basic Input/Output System) n 64-bit Device drivers n 64-bit applications Certain device drivers and/or applications may not be compatible with a 64-bit CPU and therefore may not function properly.
Disclaimers LCD Over a period of time, and depending on the usage of the computer, the brightness of the LCD screen will deteriorate. This is an intrinsic characteristic of LCD technology. Maximum brightness is only available when operating in AC power mode. The screen will dim when the computer is operated on battery power and you will not be able to increase the brightness of the screen.
Specifications Appendix A Specifications This appendix summarizes the computer's technical specifications. Dimensions 362mm (W) × 267.8mm (D) × 39.3mm (H. Max.) 362mm 267.8mm 39.3mm Weight Starting at 2.72kg / 5.99lbs* * Weight may vary depending on product configuration, vendor components, manufacturing variability and options selected.
Specifications Environmental Requirements Conditions Ambient temperature Relative humidity Operating 5°C to 35°C 20% to 80% Non-operating -20°C to 65°C Conditions Altitude (from sea level) Operating -30 to 10,000 feet Non-operating -30 to 40,000 feet Built-in Modem Network control unit (NCU) Type of NCU AA Type of line Telephone line (analog only) Type of dialling Pulse Tone Control command AT commands EIA-578 commands Monitor function Computer's speaker Communication specifications
Specifications User’s Manual Communication Speed Data transmission and reception 300/1200/2400/4800/7200/9600/12000/14400/ 16800/19200/21600/24000/26400/28800/31200/ 33600 bps Data reception only with V.90/V.92 28000/29333/30666/32000/33333/34666/36000/ 37333/38666/40000/41333/42666/44000/45333/ 46666/48000/49333/50666/52000/53333/54666/ 56000 bps Fax: 2400/4800/7200/9600/12000/14400 bps Error correcting MNP class 4 and ITU-T V.42 Data compression MNP class 5 and ITU-T V.
Display Modes Appendix B Display Modes This appendix contains a table listing all the display modes when the display is set to an external monitor. If you are running some applications (for example a 3D application or video playback and so on), you may see some disturbance, flickering or frame dropping on your screen. If that occurs, adjust the resolution of display, lowering it until the screen is displayed properly. You could also disable Windows Aero™ to help correct this situation.
Display Modes Displaying movies on a TV or CRT This section describes how to set up your system to display movies simultaneously on your computer's LCD and on an external TV or CRT monitor. To connect a television, follow the steps below. 1. Turn the computer off. 2. Use a video cable (not supplied) to connect the television to the video out port. 3. Turn the television on. 4. Turn the computer on. You can use the hotkeys Fn + F5 or use the TV-Out button to change the display device.
Display Modes 3. Click the Advanced Setting button. The Generic PnP Monitor and Mobile Intel® 945GM Express Chipset Family dialogue box opens. 4. Click the Graphics Properties button.
Display Modes 5. In the subsequent dialogue box, click Display Devices and then set up your television and notebook displays. For nVidia 1. Click Start Control Panel Personalization. 2. Choose Display Settings.
Display Modes 3. Click the Advanced Settings button. The Generic PnP Monitor and NVIDIA GeForce Go 7300 Properties dialogue box opens. 4. Click Start the NVIDIA Control Panel.
Display Modes 5. Click Display item. 6. Click Change Display Configuration item. 7. Setup your television and notebook display.
AC Power Cord and Connectors Appendix C AC Power Cord and Connectors The power cord's AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Minimum 1.7 meters Wire size: Minimum 0.75 mm2 Current rating: Minimum 2.5 amperes Voltage rating: 125 or 250 VAC (depending on country/region's power standards) Certification agencies U.S.
AC Power Cord and Connectors For the United States and Canada, two pin plug configuration must be a 2-15P (250V) or 1-15P (125V) and three pin plug coniguration must be 6-15P (250V) or 5-15P (125V) as designated in the U. S. National Electrical code handbook and the Canadian Electrical Code Part II. The following illustrations show the plug shapes for the U. S. A. and Canada, the United Kingdom, Australia and Europe.
If your computer is stolen Appendix D If your computer is stolen Always take care of your computer and try to prevent it from being stolen. You are the owner of a valuable technical device, which may be highly attractive to thieves, so please do not leave it unattended in a public place. To further help protect against theft, security cables can be bought for use with your notebook when it is being used at home or in the office.
If your computer is stolen TOSHIBA Theft Registration Send to: Fax number: TOSHIBA Europe GmbH Technical Service and Support Leibnizstr. 2 93055 Regensburg Germany +49 (0) 941 7807 921 Country stolen: Machine type: (e.g. A200) Model number: (e.g. PSA30 YXT) Serial number: (e.g.
Glossary Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference.
Glossary ROM: read only memory RTC: real time clock SCSI: small computer system interface TFT: thin-film transistor USB: Universal Serial Bus VESA: Video Electronic Standards Association VGA: video graphics array WXGA: wide extended graphics array A adaptor: A device that provides an interface between two dissimilar electronic devices. For example, the AC adaptor modifies the power from a wall outlet for use by the computer.
Glossary C cache memory: High speed memory which stores data that increases processor speed and data transfer rate. When the CPU reads data from main memory, it stores a copy of this data in cache memory. The next time the CPU needs that same data, it looks for it in the cache memory rather than the main memory, which saves time. The computer has two cache levels. Level one is incorporated into the processor and level two resides in external memory.
Glossary CRT: Cathode Ray Tube. A vacuum tube in which beams projected on a fluorescent screen-producing luminous spots. An example is the television set. cursor: A small, blinking rectangle or line that indicates the current position on the display screen. D DC: Direct Current. Electric current that flows in one direction. This type of power is usually supplied by batteries. default: The parameter value automatically selected by the system when you or the program do not provide instructions.
Glossary format: The process of readying a blank disk for its first use. Formatting establishes the structure of the disk that the operating system expects before it writes files or programs onto the disk. function keys: The keys labeled F1 through F12 that tell the computer to perform certain functions. G gigabyte (GB): A unit of data storage equal to 1024 megabytes. See also megabyte. graphics: Drawings, pictures, or other images, such as charts or graphs, to present information.
Glossary L Light Emitting Diode (LED): A semiconductor device that emits light when a current is applied. Liquid Crystal Display (LCD): Liquid crystal sealed between two sheets of glass coated with transparent conducting material. The viewing-side coating is etched into character forming segments with leads that extend to the edge of the glass. Applying a voltage between the glass sheets alters the brightness of the liquid crystal. LSI: Large Scale Integration.
Glossary P parity: 1) The symmetrical relationship between two parameter values (integers) both of which are either on or off; odd or even; 0 or 1. 2) In serial communications, an error detection bit that is added to a group of data bits making the sum of the bits even or odd. Parity can be set to none, odd, or even. peripheral device: An I/O device that is external to the central processor and/or main memory such as a printer or a mouse. pixel: A picture element.
Glossary T terminal: A typewriter-like keyboard and CRT display screen connected to the computer for data input/output. TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. TouchPad/Dual Mode Pad: A pointing device integrated into the TOSHIBA computer palm rest.
