TOSHIBA Portable Printer B-EP2DL/EP4DL SERIES Owner's Manual [B-EP2DL] [B-EP4DL]
CE Compliance (for EU only) This product complies with the requirements of EMC and R&TTE Directives including their amendments. FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
CAUTION! 1. Only use TOSHIBA TEC battery packs designed and manufactured for use with the specific printer model. There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. B-EP2DL-GH20-QM-R B-EP2DL-GH30-QM-R B-EP2DL-GH40-QM-R B-EP4DL-GH20-QM-R B-EP4DL-GH30-QM-R B-EP4DL-GH40-QM-R B-EP802-BT-QM-R B-EP804-BT-QM-R 2.
ATTENZIONE! 1. Utilizzare il pacco batterie corretto per ogni modello di stampante. Esiste il rischio di esplosine se utilizzate le batterie sbagliate. Smaltite le batterie secondo le istruzioni. B-EP2DL-GH20-QM-R B-EP2DL-GH30-QM-R B-EP2DL-GH40-QM-R B-EP4DL-GH20-QM-R B-EP4DL-GH30-QM-R B-EP4DL-GH40-QM-R B-EP802-BT-QM-R B-EP804-BT-QM-R 2. Qualora la stampante sia collegata ad una alimentazione esterna, esempio la presa in corrente alternata, utilizzate esclusivamente l’adattatore corretto:.
English The following information is for EU-member states only: Disposal of products (based on EU-Directive 2002/96/EC, Directive on Waste electrical and electronic equipment – WEEE) The use of the symbol indicates that this product may not be disposed as unsorted municipal waste and has to be collected separately. Integrated batteries and accumulators can be disposed of with the product. They will be separated at the recycling centers.
Nederlands Onderstaande informatie geldt enkel in EU lidstaten: Het afdanken van producten (volgens EU-richtlijn 2002/96/EC, Richtlijn betreffende afgedankte elektrische en elektronische apparatuur – WEEE) Dit symbool geeft aan dat dit product niet mag afgedankt worden als algemeen huishoudelijk afval. Het dient afzonderlijk gecollecteerd te worden. Geïntegreerde batterijen of laders kunnen samen met dit product afgedankt worden. Zij worden in het recyclagecentrum gescheiden.
Precautions for Handling of Wireless Communication Devices Bluetooth® Module: TEC-BTM-R (GH30 model) Wireless LAN Module: SD-Link 11g (GH40 model) Trade Mark Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. and used byTOSHIBA TEC CORPORATION under license. Cautions General For all countries and areas This product is a wireless communication device, and the use of thisproduct is restricted to the following countries or areas.
Keep away from a microwave. Communication performance may deteriorate or a communication error may occur due to the radio emitted from a microwave. Since the Bluetooth and wireless LAN use the same radio frequency band, each radio wave may interfere with each other when they are used at the same time, causing a deterioration of communication performance or a disconnection of network. If there is any problem with connection, please stop using either Bluetooth or wireless LAN.
WARNING This indicates that there is the risk of death or serious injury if the machines are handled improperly or contrary to this indication. • If water or any other liquid enters the machine, turn off the power. Continuous use of the machine under such conditions may cause fire or electric shock. • If the enclosure is damaged when dropped or subject to shock, turn off the power. Continuous use of the machine under such conditions may cause fire or electric shock.
Media Specification 㩷 Label㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 (E) (I) (A) (H) (B) Feed direction (G) (F) (D) (C) Tag/Receipt㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 Black Mark (H) (B) (A) (E) (G) (D) 9
B-EP2DL Series (Unit: mm) Receipt No black mark Batch mode Strip mode Tag/Receipt With black mark (A) Label/Receipt pitch 10.0 - 999.9 13.0 - 67.0 10.0 – 999.9 --- (B) Label/Receipt length 7.0 - 997.0 10.0 - 60.0 7.0 - 997.0 --- Item Media Label (C) Backing paper width 26.0 – 58.0 --- (D) Media width 24.0 – 56.0 24.0 – 58.0 (E) Gap/black mark length 3.0 - 7.0 (F) Vertical gap 1.0 - 7.0 3.0 - 7.0 --- (G) Effective print width (H) Effective print length --- 48.0 7.0 - 995.0 8.
CARE/HANDLING OF THE MEDIA CAUTION! Be sure to read carefully and understand the Supply Manual. Use only media that meets specified requirements. Use of non-specified media may shorten the head life and result in problems with bar code readability or print quality. All media should be handled with care to avoid any damage to the media or printer. Read the following guideline carefully. • Do not store the media for longer than the manufactures recommended shelf life.
Printer Specification 㩷 B-EP2DL Series 㩷 Model Driving power source Printable count Life cycle Print method Resolution Print speed Issue mode Effective print width Font Bar code 2-dimensional code Media detection sensor Interface IrDA (IrDA V1.2 Low Power) USB (V2.0) Serial (RS-232C) Bluetooth(V1.2) Wireless LAN (IEEE802.
B-EP4DL Series 㩷 Model Driving power source Printable count Life cycle Print method Resolution Print speed Issue mode Effective print width Font Bar code 2-dimensional code Media detection sensor Interface IrDA (IrDA V1.2 Low power) USB (V2.0) RS-232C Bluetooth (V1.2) Wireless LAN (IEEE802.11b/g) Operating temperature Operating humidity Storage temperature Storage humidity Dimensions (Unit: mm) Weight Accessories Option B-EP4DL-GH20-QM-R B-EP4DL-GH30-QM-R B-EP4DL-GH40-QM-R Lithium ion battery 14.
Daily maintenance 㩷 To help retain the high quality and performance of your printer, it should be cleaned regularly cleaned. 㩷 CAUTION! 㩷 㩷x DO NOT USE a sharp object to clean the print head or various rollers, as this may cause a print failure or 㩷 breakdown of the printer. 㩷x NEVER USE any volatile solvent including thinner and benzene, as this may cause a print failure or 㩷 breakdown of the printer. 㩷x Do not touch the print head element with bare hands, as static may damage the print head.
Media Guide Roller and Strip Shaft Media Guide Roller Wipe clean the Media Guide Rollers with a soft cloth moistened with absolute ethyl alcohol while rotating the rollers. Wipe clean the strip shaft with a soft cloth slightly moistened with absolute ethyl alcohol. Strip Shaft Clean the strip shaft of the linerless label kit in the same way.
Part Names 㩷 B-EP2DL Series 㩷 㩷㩷 㩷㩷 㩷 Peel-off Roller Print Head Media Guide Roller Platen Media Sensor Top Cover Peel-off Roller Cover IrDA Window RS-232C Port (GH20 only) USB Port Top Cover Open Button 㩷 㩷 Battery Lever Operation Panel 㩷 Battery Pack Strap Slot DCIN Connector Belt Clip Print Head Cleaner Ferrite Core M-3x8 Screws BD Address Label (2 pcs.
B-EP4DL Series 㩷 㩷㩷 㩷 Peel-off Roller Print Head Media Guide Roller Media Sensor Platen Top Cover Peel-off Roller Cover IrDA Window RS-232C Port (GH20 only) Top Cover Open Button Battery Lever Operation Panel Battery Pack Strap Slot USB Port DCIN Connector Belt Clip Print Head Cleaner Ferrite Core M-3x8 Screws BD Address Label (2 pcs.
Operation Panel Functions 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 (2) (3) (4) (5) (6) (7) (8) (1) NOTE: Do not touch the Operation panel with a sharp object, as the surface of the Operation panel is easily damaged. (9) (11) No. (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (12) Name/Icon (13) Function/Usage Upper line: Icons indicating the printer statuses, such as the radio Liquid Crystal Display intensity, battery level, etc. are displayed.
No. Name/Icon (10) CHARGE lamp (11) 䌛POWER䌝 button (12) [FEED䌝 button (13) [PAUSE䌝 button Function/Usage Lights up in orange while the battery pack is charged and goes out when the battery charge is completed. Turns on or off the printer. How to turn on the printer While the printer is off, hold down the POWER button for a few seconds. When “ONLINE” is displayed on the LCD, the printer is ready. How to turn off the printer Hold down the POWER button until the LCD goes off.
Loading a battery pack 㩷 㩷 WARNING! 㩷 1.If the battery pack leaks liquid or gives out smoke or bad smell, immediately stop using it and keep it 㩷 㩷 away from fire. Failure to do this may cause explosion or combustion. 㩷 2.In the United States, used lithium ion batteries should be returned to the store where you bought the 㩷 machine. (USA only) 㩷 3.LITHIUM ION BATTERY DISPOSE OF PROPERLY 㩷 Caution: Do not handle damaged or leaking lithium ion battery. 㩷 4.
Removing a battery pack 㩷 Slide the Battery Lever in the direction of the arrow, and remove the Battery Pack from the printer. 㩷 Battery Lever Battery Pack [B-EP2DL Series] Battery Lever Battery Pack [B-EP4DL Series] 㩷 㩷 Charging the Battery Pack with an Optional Adapter 㩷 When charging the battery pack in the printer using an optional AC Adapter, cigarette lighter adapter, or DC adapter, insert the plug of the adapter into DCIN Connector of the printer.
Loading the Media 㩷 1.㩷Press the Top Cover Open Button to open the Top 4.㩷Adjust the Paper Guides to the media roll width. Cover. 5.㩷Push back the Paper Guide Lever to lock the Paper Guides. Top Cover Top Cover Open Button Lock Paper Guide Lever Paper Guide [B-EP2DL Series] Top Cover Top Cover Open Button 6.㩷Pull the top edge of the media toward the Operation Panel, and close the Top Cover removing slack of the media. Top Cover Media [B-EP4DL Series] 2.
Before using a peel-off unit 㩷 When issuing labels in the peel-off mode, pull out the How to put back the Peel-off Roller peel-off roller before loading a label roll. 1. Slightly hold down the Peel-off Roller Cover, and 1. Open the Top cover, and push the Peel-off Cover insert the Peel-off Roller under the Peel-off Roller by the Ÿ marks with your thumbs in the direction Cover. of the arrow. Peel-off Roller Peel-off Roller Cover Peel-off Roller Cover 2.
How to attach the accessories 㩷 㩷 CAUTION! 㩷 1. Care should be taken not to drop the printer when securing it to your waist or slinging it over your shoulder. 㩷 2. For fixing the printer to your belt, the belt width should be 40 mm or less Use of the other belts may cause the 㩷 printer to drop. 㩷 Belt Clip When you use the printer fixing to your belt, secure the supplied Belt Clip to the printer back. M-3x8 Screw 1. Secure the Belt Clip to the printer back with the two screws.
㩷 㩷 㩷 A carry case exclusively for the printer is available as 㩷 㩷 an option. 㩷 㩷 B-EP2DL Series: B-EP902-CC-QM-R 㩷 㩷 B-EP4DL Series: B-EP904-CC-QM-R 㩷 Put the printer into the Carry Case using the following 㩷 㩷 procedure. 㩷 㩷 1. Turn off the printer. 㩷 㩷 2. Put the printer into the Carry Case in the orientation indicated by the illustration on the right. 㩷 㩷 㩷 NOTE: 㩷 Carry case (Option) Carry Case d Before putting the printer into the Carry Case, remove the Belt Clip, if it has been attached.
Data Transmission When connecting a USB cable or an RS232C cable to the printer, put the ferrite core supplied with the printer on the cable, as shown below. Approx. 20 mm Wind the cable around the ferrite core one time. Host Printer Ferrite Core IrDA 1.㩷Place the printer close to the host so that their IrDA windows face each other within 20 cm distance. PC 2.㩷Turn on the printer and the host, and send data from the host to the printer.
㩷 Serial (RS-232C) (GH20 model only) 1. 㩷 Connect the serial interface cable to the RS-232C port on the printer. 2. 㩷 Connect the other end of the serial interface cable to the host. RS-232C Port Interface Cable 3. 㩷 Turn on the printer and the host, and send data from the host to the printer. NOTE: For details of the interface cable, please consult the nearest TOSHIBA TEC representative. Wireless (GH30/GH40 model only) 1. 㩷 In the case of Bluetooth, place the printer within 3 m from the host.
Troubleshooting When a problem occurs during operation, please check the following troubleshooting guide and take corrective action. If you cannot solve a problem with the following solutions, do not attempt to repair it by yourself. Turn off the printer, remove the battery pack, then contact a TOSHIBA TEC service representative for assistance. If an error message is displayed. When an error message is displayed, follow the respective instruction, then press the [PAUSE] button. The error will be cleared.
Error Message Cause Solution Turn off the [POWER] button, then back to on. Send data from the host to the The flash memory has insufficient area printer again. If the problem recurs, FLASH MEM FULL for storing data. please turn off the power and contact TOSHIBA TEC service representative. Turn off the printer, and replace the LOW BATTERY Remaining battery capacity is low. battery pack with a fully charged one. Stop printing and wait until the printer automatically restores.
Symptom Point to check (Cause) The printer is communicating via wireless communication. (GH30/GH40 only) The printer cannot communicate via IrDA. The printer cannot communicate via USB. The printer cannot communicate via serial interface (GH20 only) Solution Terminate the wireless communication. Communication conditions are incorrect. Set the communication conditions correctly Issue mode is incorrect. Select a correct issue mode. Transmission speed is incorrect.
E PRINTED IN INDONESIA EO1-33079 7FM03281000