ZL1* Digital Series
English Contents CONTROLS AND FEATURES General controls ...............................................................................33 Quick Menu ..............................................................................33 Selecting channels ................................................................33 The Time Display – analogue only .................................33 Stereo and Bilingual transmissions .................................33 Using 3D functions ...................................
TEXT SERVICES Text services ......................................................................................96 Selecting modes ....................................................................96 Text information ....................................................................96 Navigating pages using Auto ............................................96 Navigating pages using LIST .............................................96 Control buttons .....................................................
English INSTALLING YOUR TV Safety Precautions DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND ‘LIVE’ PARTS. This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety.
INSTALLING YOUR TV English Installation and important information Where to install Locate the television away from direct sunlight and strong lights. Soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Fixing strap Place the TV on a stable, level surface that can support the weight of the TV.
English INSTALLING YOUR TV When using the 3D glasses Cautions on watching 3D images • The 3D function has been designed for private use and entertainment in your home environment. Please note that any commercial use of the 3D function could lead to copyright infringement of authors’ rights. Toshiba asks you to respect the intellectual property rights of third parties.
INSTALLING YOUR TV • 3D effect and image quality may vary depending upon content quality and display device capability/ functionality/settings. • If you use any device, such as a mobile phone or mobile wireless device, near the 3D glasses, the 3D glasses may not work correctly. • Use the product in the following temperature range; otherwise, the quality of the 3D image or the reliability of the product cannot be guaranteed.
English INSTALLING YOUR TV When using a USB HDD • The recording function has been designed for private use and entertainment in your home environment. Please note that any commercial use of the recording function could lead to copyright infringement of authors’ rights. Toshiba asks you to respect the intellectual property rights of third parties. • Before recording to a device connected to the TV, make a test recording and check the recording performance.
INSTALLING YOUR TV English Supplied Accessories For how to assemble the Speaker and Pedestal Stand, refer to “Speaker / Pedestal Assembly” on page 10.
English INSTALLING YOUR TV Speaker / Pedestal Assembly Attach the speaker and pedestal stand. WARNING: To prevent possible electric shock, protect the power cord from being pinched when attaching the pedestal stand. CAUTION: Before beginning pedestal assembly, carefully lay the front of the LCD Panel face down on a flat, cushioned surface such as a quilt or blanket. Leave the bottom of the unit protruding over the edge of the surface and assemble as indicated.
INSTALLING YOUR TV Attach the pedestal stand a a Lay the LCD Panel face down on a flat, cushioned surface such as a blanket. Secure space. English Attach the speaker Remove the cover (shown in the figure) from the pedestal stand . H Remove. b b Insert the speaker Attach the pedestal stand . and using the screws into the TV as shown. J H I A c c Fix the speaker in position with the screws Insert the pedestal stand as shown. .
English INSTALLING YOUR TV d Fix the pedestal stand in position using the screws . g Attach the cover that was removed in step 1. K Attach. h e Bundle the connection cables using the cable clamps. Connect the connection cable for the speaker to the SPEAKER terminal on the TV. Press the lock button on the connection plug and insert. Lock button. To mount on a wall f Attach the bracket and cover for wall mounting ( ) instead of the pedestal stand, using the screws , as shown in the figure.
INSTALLING YOUR TV Simple at-a-glance reference of your remote control. 1 2 4 5 3 6 8 7 10 11 9 12 13 15 14 16 17 18 19 22 24 25 27 28 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 20 21 23 26 29 31 For On/Standby mode To select external input sources To select TV Mode To access Quick Menu To access the “TOSHIBA PLACES” Top Page When network is not connected, an error message will be displayed.
English CONNECTING YOUR TV Connecting external equipment Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket.
CONNECTING YOUR TV a Mount the USB HDD Holder on the back of the TV by securing 4 screws. Back of the TV USB HDD Holder b Set the USB HDD into the USB HDD Holder, close the cover until it clicks. USB HDD c NOTE: • To disconnect a USB HDD from the TV, follow the procedures for “To disconnect a USB HDD” section (page 64). • Connect the USB HDD to the USB 2 port. Recording and playback cannot be performed if connected to the USB 1 port.
English CONNECTING YOUR TV Connecting an HDMI® or DVI device to the HDMI input The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device.
CONNECTING YOUR TV English REGZA-LINK connection You can control the basic functions of connected audio/video devices using the television’s remote control if you connect a REGZA-LINK compatible AV amplifier or playback device. For an explanation of setup and operations, see pages 93–95. the back of your television Playback device AV amplifier Playback device For the setup shown above, you will need three HDMI cables.
English CONNECTING YOUR TV Connecting a computer With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the television and hear the sound from the television’s speakers. • When PC input mode is selected, some of the television’s features will be unavailable e.g. Colour System in the Setup/System Setup menu. • Some PC models may output unique signals that the television may be unable to detect (see page 103).
CONNECTING YOUR TV The LAN port allows your Toshiba TV to connect to your home network. You can use this revolutionary home entertainment networking system to access photo, video and audio files that are stored on a DLNA CERTIFIED™ server and play/display them on your TV. To connect the TV to a home network with an internet connection - Wireless Please refer to “Wireless Setup” section on page 51.
English CONNECTING YOUR TV Controls and input connections A wide variety of external equipment can be connected to the input sockets on the side of the television. While all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions. USB 1 port Media Player USB 2 port Media Player USB HDD connection port COMMON INTERFACE The Common Interface is for a Conditional Access Module (CAM). Contact a service provider.
CONNECTING YOUR TV English MENU structure To open the main menu (illustration below) , press MENU on the remote control or on the TV control panel. Genre Search Programme Timers Library Setup TV Programmes Media Player Guide Function 1st Layer Press MENU. Connected TV 2nd Layer Press C c / B. Press C c. 3rd Layer Press OK. Press BbC c.
English SETTING UP YOUR TV g Startup Application Before switching on the television, set your decoder and media recorder, if applicable, to Standby. To set up the television, use the buttons on the remote control as detailed on page 13. Quick Setup a AutoView AutoView mode automatically adjusts picture settings to suit ambient light conditions. Do you wish to enable AutoView mode? No h Press the 1 button. The Menu Language screen will appear.
SETTING UP YOUR TV Press C or c to view the DTV (digital channel) or ATV (analogue channel) lists. l Press B or b to move through the list to select a channel and press OK to view. Press B or b to highlight Store Position and press OK to store the dish position. Repeat steps 13 and 14 for the next satellite as necessary. If your satellite dish is not movable, the Positioning screen will not appear. In ATV mode, some areas may receive duplicate stations.
English SETTING UP YOUR TV e When Ant/Cable/Satellite is set to Cable, the following setting options will be provided in the Auto Tuning screen. Press B or b to select an item and press C or c to select your desired option. Auto Tuning Tuning Mode Satellite Settings From the System Setup menu, you can add the satellites that you wish to tune and configure detailed settings for each one individually. To add a satellite: a Press MENU / C c to highlight Setup icon.
SETTING UP YOUR TV To delete a transponder: a In the Satellite Settings menu, press B to highlight Switch Type. a b Press C or c to select None, ToneBurst, DiSEqC 2way or DiSEqC 4way as your satellite switch type. b c Press b to highlight LNB Power and press C or c to select On or Off. English To edit the satellite settings: In the Transponder Settings menu, press B or b to highlight the line you want to delete. Press the RED button.
English SETTING UP YOUR TV e To select the LNB Settings: a In the Satellite Settings menu, press B or b to select the required satellite line and press OK. b Press C or c to highlight LNB and press the GREEN button. For DTV/ATV Tuning: A screen will appear warning that previous programmes and settings will be deleted. Auto Tuning Previous settings will be lost! Press EXIT for no change.
SETTING UP YOUR TV Tuning In the System Setup menu, press b to select ATV Manual Tuning and press OK. System Setup Menu Language The television can be tuned-in manually using ATV Manual Tuning. For example, you might use the feature if the television cannot be connected to a media recorder/decoder with a SCART lead or when you want to tune-in a station on another System.
English SETTING UP YOUR TV g h Each signal will show on the television. If it is not your media recorder, press B or b again to restart the search. d Use B or b to turn Skip on. Press OK. 8 on the screen indicates a skipped position. When your media recorder signal is found, press c to move along to Station. Use B, b, C and c to put in the required characters, e.g. VCR.
SETTING UP YOUR TV Manual Tuning for DVB-C NOTE: The content of this menu varies depending on the DTV input (Antenna, Cable, or Satellite) that is currently selected. When Ant/Cable/Satellite is set to Cable, DTV Manual Tuning items are as follows: Frequency – input a specific frequency to be scanned Manual Tuning Modulation – choose from one of five QAM modulation options This feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known.
English SETTING UP YOUR TV DTV Settings Move — Press the GREEN button to activate the Move feature. Press the B or b buttons to select the channel you wish to move and press OK to check. If you wish to move multiple channels at once, select another channel and check in the same way. Repeat as necessary. Once all desired channels have been checked, press the B or b buttons to place the focus at the position to which you wish to move the channels.
SETTING UP YOUR TV a Sorting Type — Press C or c to set the sorting type. Select DTV Settings from the System Setup menu and press OK. A-Z Sort Station name order (A to Z) Number Position No. order (numerical sequence) b Select Channels and press OK. Preset Order — Press C or c to set Yes or No. The satellite channel list will appear. This item is displayed when Country is set to Germany, and only applies to the Astra 19.2°E satellite. Channels Line No. 3/1200 Pos.
English SETTING UP YOUR TV Location setting You can select either Home or Store mode. Home is recommended for normal home use. Select Store when using the television for displaying in a shop, etc. a Select Location from the System Setup menu. b Press C or c to select Home or Store. Analogue switch-off This is a digital television which is integrated to allow the use of both digital and analogue services.
CONTROLS AND FEATURES Mode Quick menu item Photo Frame (Full Screen) Quick Menu Quick Menu helps you access some options quickly, such as Picture Mode, Picture Size, Personal Mode, More Information, Sleep Timer etc. Press QUICK to display the Quick Menu and use B or b to select the option. Quick Menu Picture Mode AutoView Picture Size Super Live Description Picture See page 43. Picture Size See page 41. 3D Settings See page 36. Personal Mode See page 92.
English CONTROLS AND FEATURES Using 3D functions To set the 3D glasses: Before using 3D programming, see and follow “When using the 3D glasses” section on page 6. a Viewing 3D programming requires the following: b • TOSHIBA 3D Glasses FPT-AG02G (supplied) • Compatible 3D playback device or 3D source • 3D capable high quality HDMI cable When you use for the first time, peel off the protective films from the lenses. Peel off Turn the 3D glasses on with the power switch.
CONTROLS AND FEATURES If a right and left images are same in Native mode, select SBS. Incoming video signals can either be in 2D or 3D format. A 2D signal can be viewed in either 2D or 3D, and 3D can be viewed in either 2D or 3D. If the TV can detect the fact that a signal is 3D, it can change to 3D mode automatically – see “Setting the auto start mode” (on page 37). Otherwise you can change the viewing mode using the 3D button.
English CONTROLS AND FEATURES To select 3D format from the Quick menu in 3D mode: To select 2D format from the Quick menu in 2D mode: a Press QUICK to display the Quick Menu. a Press QUICK to display the Quick Menu. b Press B or b to select 3D Settings and press OK. b Press B or b to select 3D Settings and press OK. c Press B or b to select 3D Format Select and press OK. c Press B or b to select 2D Format Select and press OK. d Press C or c to select Side by Side or Top and Bottom.
CONTROLS AND FEATURES Controls what the TV does when it detects a 3D signal. a Press MENU / C c to highlight Setup icon. b Press B / C c to highlight Preferences icon and press OK. c To change or delete your PIN code: a In the Preferences menu, press B or b to select 3D Setup and press OK. b Press B or b to select 3D PIN Setup. c Press the number buttons to enter your 4-digit PIN code. Press B or b to select 3D Setup and press OK. d Select Change PIN or Delete PIN and press OK.
English CONTROLS AND FEATURES Setting 3D Lock When this feature is set to On, you must enter 3D PIN code for changing display mode. a In the Preferences menu, press B or b to select 3D Setup and press OK. b Press B or b to select 3D Safety Settings and press OK. Displaying 3D Important Info a In the Preferences menu, press B or b to select 3D Setup and press OK. b Press B or b to select 3D Important Info and press OK. Adjusting 2D to 3D Depth c Enter your 4-digit 3D PIN code.
CONTROLS AND FEATURES Volume controls and sound mute Equaliser Volume Press y or Y to adjust the volume. +20 Sound Mute Press once to turn the sound off and again to cancel. 0 -20 Dual If a programme or film is being broadcast with a soundtrack in more than one language, the Dual feature allows selection between them. a Press MENU / C c to highlight Setup icon. b Press B / C c to highlight Sound icon and press OK. c e Sound Dual 10K 1 2 [Hz] [Level] Repeat step 4 for other frequencies.
English CONTROLS AND FEATURES Dolby Volume® • When watching a DTV 5.1ch programme, this feature is not available. This feature provides a consistent sound volume regardless of programmes, channels or input sources. a In the Sound menu, press B or b to select Dolby Volume. b Press C or c to select Low, High or Off. Headphone Settings This setting is used to set the sound output when headphones are connected.
CONTROLS AND FEATURES English Widescreen viewing Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. WIDE 4:3 Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due to the range of widescreen formats (16:9, 14:9, 20:9 etc.) black bars may be visible on the top and bottom of the screen. Use this setting to view a true 4:3 broadcast.
English CONTROLS AND FEATURES NATIVE This setting will show the picture without overscan, i.e. WYSIWYG. PC NORMAL This setting will show the picture without overscan, i.e. WYSIWYG. This option is only available when watching a PC signal source via HDMI or PC terminal. PC WIDE This setting will show the picture without overscan or side panels. This option is only available when watching a PC signal source via HDMI or PC terminal. Dot by Dot Press the “Dot by Dot” is a non-scaling display.
CONTROLS AND FEATURES English Picture controls Picture preferences You can customize current picture mode settings as desired. For example, while selecting “Dynamic”, if you change the following items, such as Backlight, Contrast, Brightness, Colour, Tint, Sharpness and the Advanced Picture Settings items, your new settings are saved for “Dynamic” picture mode. Most of the picture controls and functions are available in both digital and analogue modes.
English CONTROLS AND FEATURES Base Colour Adjustment Auto Brightness Sensor Settings The Base Colour Adjustment feature allows the adjustment of individual colours to suit personal preference. This can be useful when using an external source. When the Auto Brightness Sensor is activated, it will automatically optimise the backlighting levels to suit ambient light conditions. a In the Advanced Picture Settings menu, press B or b to select Base Colour Adjustment and press OK.
CONTROLS AND FEATURES DNR – Digital Noise Reduction When LED Backlight Control is set to On, you can adjust the brightness of the white areas. DNR allows you to “soften” the screen representation of a weak signal to reduce the noise effect. a In the Advanced Picture Settings menu, press B or b to select Peak Brightness Adjustment. b Press C or c to select Off, Low, Middle, High, or Auto. a b Select DNR from the Noise Reduction menu. Press C or c to select Low, Middle, High, Auto or Off.
English CONTROLS AND FEATURES Resetting the advanced picture settings This feature allows you to reset the current Advanced Picture Settings to the default values. a b In the Advanced Picture Settings menu, press B or b to select Reset. Press OK. Expert Picture Settings This feature is available when the Picture Mode option is Standard, Hollywood Day, Hollywood Night, and Hollywood Pro.
CONTROLS AND FEATURES b The aim of Colour Calibration is to measure and/or adjust the colour response (White Balance) of your LCD panel. Colour Calibration is used by various fields, such as gaming, photography, engineering, medical and more. In order to calibrate a display correctly, you need a colour analyzer TPA-1 (not supplied). c Please wait until you see “Auto Colour Calibration has been completed.”.
English CONTROLS AND FEATURES Control Visualization 4:3 Stretch This feature displays the brightness histogram and control curve of the current video signal. When 4:3 Stretch is activated, the size switching system changes 4:3 programmes into full screen picture. a In the Picture menu, press B or b to select Control Visualization and press OK. The histogram window will appear. a In the Preferences menu, press B or b to select Display Settings and press OK.
CONTROLS AND FEATURES English Picture still This feature is used to hold a still image on the screen. a Press r to hold an image on the screen, and press r again to cancel. HDMI Information Display When the HDMI Information Display feature is On and you are watching an HDMI input source, pressing the button displays the HDMI signal information banner. a In the Preferences menu, press B or b to select HDMI Information Display. b Press C or c to select On.
English CONTROLS AND FEATURES Wireless LAN Information Bluetooth™ and Wireless LAN devices operate within the same radio frequency range and may interfere with one another. If you use Bluetooth™ and Wireless LAN devices simultaneously, you may occasionally experience a less than optimal network performance or even lose your network connection. If you should experience any such problem, immediately turn off either your Bluetooth™ or Wireless LAN device.
CONTROLS AND FEATURES Easy Setup using PBC (Push Button Configuration) You can select the Network Type. a Press MENU / C c to highlight Setup icon. b Press B / C c to highlight Preferences icon and press OK. c Press B or b to select Network Setup and press OK. a In the Preferences menu, press B or b to select Network Setup and press OK. b Press B or b to select Wireless Setup and press OK. c Press B or b to select Easy Setup and press OK.
English CONTROLS AND FEATURES To cancel searching for the AP: f Press B or b to select Authentication and press C or c to select Open System, Shared Key, WPA-PSK or WPA2-PSK. g Press B or b to select Encryption and press C or c to select None, WEP, TKIP or AES. Press BACK while searching for the AP. A message will appear; then, press C or c to select Yes and press OK. Assisted Setup a In the Preferences menu, press B or b to select Network Setup and press OK.
CONTROLS AND FEATURES The settings configured in Wireless Setup can be confirmed. a Press QUICK to open the Quick Menu. NOTE: Even if an AP for IEEE 802.11n is used when Encryption is set to WEP or TKIP, the Speed value might be low. It is recommended that Encryption be changed to AES (see “Manual Setup” on page 52). Notes on wireless LAN environment: b Press B or b to select Wireless Information and press OK.
English CONTROLS AND FEATURES d DNS Setup Highlight Auto Setup and press C or c to select On. IP Address Setup Auto Setup On IP Address XXX . Subnet Mask 255 . 255 . 255 . Default Gateway XXX . XXX . . . XXX 0 . NOTE: When the DHCP function of the router connected to this TV is Off, set Auto Setup to Off, and manually set the DNS address(es). Your internet service provider should have provided these to you. Auto setup: NOTE: Other items will be grayed out when Auto Setup is set to On.
CONTROLS AND FEATURES Using the software keyboard You can view the fixed MAC address for the TV. a In the Preferences menu, press B or b to select Network Setup and press OK. b Press B or b to select Advanced Network Setup and press OK. c You can enter text by using the Software Keyboard. The Software Keyboard window will appear when you press OK on a field that accepts character input. To enter text using the software keyboard: a Highlight the desired character on the on-screen software keyboard.
English CONTROLS AND FEATURES Network Device Setup Media Renderer a In the Preferences menu, press B or b to select Network Device Setup and press OK. b Press B or b to select Media Renderer Setup and press OK. c Press B or b to select Media Renderer, and then press C or c to select On or Off. External Control Setup This setup allows you to operate a home network-connected your TV from an external device.
CONTROLS AND FEATURES When the TV is connected to the home network via Wireless LAN, Wake-on-LAN can be received from an external device connected to the home network to turn on the TV. a b In the Preferences menu, press B or b to select Network Device Setup and press OK. Press B or b to select Power Control Mode and press C or c to select On or Off. NOTE: • When Wired is selected for the Network type in Network Setup, this feature will be grayed out.
English CONTROLS AND FEATURES To record DTV programmes (One Touch Recording) c 10:50 Tue, 26 Apr Set Timer The Daily Politics You can easily record the programme currently being viewed. a Press OK. The Set Timer menu will appear. 2 CABC Channel 11:30 - 12:30 Tue, 26 Apr Press the ● REC button on the remote control. Timer Type Recording for the currently viewing programmes will start. Recording USB HDD1 Recording Device — Programme Tracking The programme indicator (red) will be lit.
CONTROLS AND FEATURES a b f Press OK. The Set Timer menu will appear. 10:50 Tue, 26 Apr Set Timer The Daily Politics In the Guide screen, press QUICK. 2 CABC Channel 11:30 - 12:30 Tue, 26 Apr Press B or b to highlight Genre Colour in the Quick Menu and press OK.
English CONTROLS AND FEATURES To programme the timer a b Protect: Select this function when you want to protect a recorded programme. When On is selected, the programme will be protected. You can protect and unprotect recorded programmes afterwards. Press MENU / C c / B / C c to highlight TV Programmed / Programme Timers icons and press OK. Select the unprogrammed column (blank column) and press OK. The Set Timer menu will appear.
CONTROLS AND FEATURES d e To delete a schedule Press B or b to highlight Timer Type and press C or c to select Recording. a Press B or b to highlight Recording Device and press C or c to select the connected USB HDD. b Press the RED button. NOTE: You can also delete a schedule by selecting Delete Timer from the Set Timer menu for each programming method. Press B or b to highlight Set Timer and press OK. The ORANGE LED will be lit.
English CONTROLS AND FEATURES c Press C or c to select a day tab or Personal Mode tab. To protect or unprotect a recorded programme NOTE: If no titles have been registered to Personal Mode, Personal Grouping will be grayed out. Protecting a programme prevents it from being accidentally deleted. Select the title of the programme you want to protect and press the GREEN button. icon appears next to the title and the programme is protected.
CONTROLS AND FEATURES a b Quick Menu Personal Grouping c Recording Setup Select the title you want to register to Personal Mode. Press the QUICK button to display the Personal Mode registration menu. You can set your preferences for One touch Recording or for scheduling recording. To set the recording time for One Touch Recording a Press MENU / C c to highlight Setup icon. b Press B / C c to highlight Preferences icon and press OK. c Press B or b to select Recording Setup and press OK.
English CONTROLS AND FEATURES Setting USB HDD Energy-Saving Mode To register a USB HDD a In the Recording Setup screen, press B or b to select Recording Devices and press OK. a b Press B or b to select Device Energy Saving Mode. Recording Devices Device List Device Energy Saving Mode c Normal Press C or c to select Normal or Energy Saving. NOTE: • When set to Energy Saving, it may take a while for the USB HDD to function.
CONTROLS AND FEATURES a If programmed recording is not performed correctly or some other error occurs, you can check the error content using Recording Information. Up to 64 Recording Information entries will be recorded and when the maximum is exceeded, entries will be deleted starting from the oldest. You can delete Recording Information after you have checked it. a b Press B or b to select Recording Information and press OK. The Recording Information screen will appear.
English CONTROLS AND FEATURES Using Toshiba Places Using YouTube™ A new cloud based service, where content (movies, photos, etc.) can be viewed and shared across the web through a simple user interface called “Toshiba Places”. YouTube is a video-sharing service managed by YouTube, LLC. This TV allows you to view YouTube content. NOTE: You need to configure a home network before using this feature (see page 19).
CONTROLS AND FEATURES The Function Menu provides easy access to functions that are commonly used. a Press the BLUE button while displaying YouTube. The Function menu window will appear. Back Forward Reload Home Pointer Menu a Press B or b to select Pointer: ON and press OK. b Press the BLUE button. c From the Function menu, press C or c to select Pointer, and then press OK. d Press B or b to select Drag Mode and press OK. • http://www.youtube.
English CONTROLS AND FEATURES If you select Advanced Settings: Item a Press BbC c to select the setting items, and press OK. A check will appear in the box. To remove the check, press OK again. b Press BbC c to select OK field and press OK. Item When jumping from a protected page to an unprotected page, the message is displayed when the check is applied to Notify of secure/non-secure page changes. Apply the check to select SSL version from SSL Version to use (SSL2.0, SSL3.0, TSL1.0).
CONTROLS AND FEATURES Hybrid TV Standard enables the TV to receive HbbTV services. TV services which support this feature often show “press RED” on the screen. NOTE: You need to configure a home network before using this feature (see page 19). Using the Media Player This TV allows you to enjoy movie, music and photo files stored on a USB device connected to the USB port. Moreover, you can also play photos, movies or music files from your PC by connecting the TV to your home network.
English CONTROLS AND FEATURES Manual Start: Basic operation a Using Media Player with USB When Auto Start is enabled, you will be asked if you want to start the Media Player whenever a USB device is inserted. If Auto Start is disabled (or if you want to connect to a DMS on the network), you must manually start the Media Player from the menu. Insert USB device into the USB socket on the left side of the TV. b Press MENU / C c to highlight Media Player icon.
CONTROLS AND FEATURES a b Viewing photo files (on a DLNA CERTIFIED™ Server or USB device) Press QUICK to open the Quick Menu in list mode or Multi View mode. There are three types of viewing modes. Press B or b to select Device Information. Multi View This view allows you to search for photos in a grid format. The pictures are displayed using thumbnail data in each image file.
English CONTROLS AND FEATURES a b c To zoom in/out photos Press c to view the next photo. Press C to view the previous photo. During the Single View mode or Slide Show mode, the zoom function can be used. Press B to rotate the image 90° clockwise. Press b to rotate the image 90° counterclockwise.
CONTROLS AND FEATURES During playback: a • Press W/w to pause. You can move to the desired replay position by pressing C or c during PAUSE. PAUSE or operations during PAUSE may not be available depending on the contents, DMC or DMS. • To resume normal playback, press c (play). • To play in fast reverse or fast forward directions, press CC or cc during playback. Each time you press the CC or cc, the playback speed will change.
English CONTROLS AND FEATURES To sort the folders and files To register your TV to a DivX® account a Press QUICK to open the Quick Menu in list mode. b Press B or b to select Sort. This TV allows you to play back files purchased or rented from DivX® Video-On Demand (VOD) services. When you purchase or rent DivX® VOD files on the internet, you will be asked to enter a registration code. c Press C or c to select Title / File Name, New or Old to set the sorting rule.
CONTROLS AND FEATURES Playing music files (on a DLNA CERTIFIED™ Server or USB device) • To play in fast reverse or fast forward directions, press CC or cc during playback. Each time you press the CC or cc, the playback speed will change. • This TV generates original chapter point in 10% increments for 10 chapters in total, that are accessible by using the Number buttons on the remote control. You can listen to music from a list of available files.
English CONTROLS AND FEATURES To set the repeat mode: To display the device information a Press QUICK to open the Quick Menu in list mode. a b Press B or b to select Repeat. b c Press C or c to select Off, All or 1. Mode Description Off Files in the same folder are played back once. All Files in the same folder are repeatedly played back. 1 The same file is repeatedly played back. d Press QUICK to open the Quick Menu in list mode. Press B or b to select Device Information and press OK.
CONTROLS AND FEATURES c Press c to select Start and press OK to open Photo Frame. You can use the TV screen as a digital photo frame. One image (pre-installed or user-installed) can be displayed. Date info can also be superimposed, if desired. You can overwrite the photo file with a file from a USB storage device or DLNA CERTIFIED™ Server. To open Photo Frame a Press MENU / C c / B / C c to highlight Setup / Preferences icons and press OK. b Press B or b to select Photo Frame Setup and press OK.
English CONTROLS AND FEATURES c Press B b C c to select the photo you want to copy from the USB storage device or DLNA CERTIFIED™ server to the TV’s flash memory, and then press OK. PHOTO /Folder Settings a Press B or b to select Settings and press OK. b Press B or b to select Clock, Position or Auto Power Off. Sort: Title Settings --/-- (---) -- 10:10 1/54 XXXXXXXXXXX.
CONTROLS AND FEATURES English Other features The timers Panel Lock Programme Timers – digital only Panel Lock disables the buttons on the television. All buttons on the remote control can still be used. This feature will set the television to go to a specific channel at a certain time. It can be used to view a particular programme, or by setting the mode to daily or weekly, can be used to view a series of programmes. a Press MENU / C c / B / C c to highlight Setup / Preferences icons and press OK.
English CONTROLS AND FEATURES On Timer Sleep Timer The feature allows you to set the television to turn on automatically to a preset channel at a certain time of day or after a certain length of time. The television can be set to turn itself Off after a certain length of time. a Press MENU / C c / B / C c to highlight Function / On Timer icons and press OK. b Press B or b to select Enable On Timer and press C or c to select On.
CONTROLS AND FEATURES Digital on-screen information and Programme Guide Automatic Power Down When viewing in digital mode, the on-screen information and programme guide provide access to programme details for all available channels. The TV will automatically turn itself off (standby) after 4 hours, if you do not operate the TV either from the remote control or the TV control panel. a Press MENU / C c / B / C c to highlight Setup / Preferences icons and press OK.
English CONTROLS AND FEATURES d Guide The details of the programme will already have been added to the timer. Highlight Set Timer and press OK to save. a To indicate that a Recording Timer has been set, a clock icon will be displayed in the Next and Also fields of the information screen. A check mark will appear if the timer is a Reminder Timer. e Select the on-screen guide by pressing GUIDE, and the Guide screen will appear highlighting details of the channel and programme currently being viewed.
CONTROLS AND FEATURES Digital settings – parental control From the Guide screen, you can use the genre selection and search features. In order to prevent viewing of unsuitable films and programmes, channels and menus can be locked in digital mode. These can then only be accessed with a security code PIN. a b In the Guide screen, press QUICK. Press B or b to highlight Genre Colour in the Quick Menu and press OK.
English CONTROLS AND FEATURES Parental Setup The Parental Control feature allows you to block programmes according to their rating levels. If a PIN has been set, you will need to enter it before adjusting the level. a b Selecting favourite channels In the DTV Settings menu, press B or b to select Parental Control and press OK. Press B or b to select Parental Setup or Playback Setup (if available). Parental Setup: Select when you want to set viewing restrictions on broadcast programmes.
CONTROLS AND FEATURES This feature allows you to set channels that will be skipped when Pu or PU are used to tune. a Subtitles Select the channel you want to skip in your channel list. b From the Quick Menu, press b to select Channel Options and press OK. c Press c repeatedly to highlight the skip (8) box. d Press OK to select. A tick will appear in the box. e Repeat steps 1 through 4 for other channels. f Press EXIT.
English CONTROLS AND FEATURES Common Interface Software Upgrade and Licences The Common Interface Slot, situated on the side of the television, enables the insertion of a CAM (Conditional Access Module) and card. These are purchased from a service provider and allow additional subscription broadcasts to be viewed. For information, see a service provider. a Insert the CAM and card into the Common Interface Slot, following the instructions provided with the CAM.
CONTROLS AND FEATURES System Information and Reset TV TOSHIBA may offer upgrades for the TV’s software in the future. The TV’s software is upgraded via the Network. System Information Before downloading software: This feature can be used to check the version of software currently installed. When in DTV mode, it includes additional diagnostic information such as signal strength, signal quality, centre frequency, modulation, etc. Configure your TV to connect to the Internet.
English CONTROLS AND FEATURES PC Settings Sampling Clock Adjusting the Sampling Clock alters the number of pulses per scan, this will clear vertical lines on the screen. Horizontal and Vertical Position Connect the PC (as shown in the “Connecting a computer” section) and ensure that a picture is showing on the television screen. The picture position may now be adjusted to suit personal preference. a Press MENU / C c / B / C c to highlight Setup / Preferences icons and press OK.
CONTROLS AND FEATURES External input skip This feature is designed to make input selection more convenient by allowing you to skip unused inputs. See page 14 for a detailed image showing recommended connections. Most media recorders and decoders send a signal through the SCART lead to switch the television to the correct Input socket. Alternatively, press the external source selection button o until the picture from connected equipment is shown.
English CONTROLS AND FEATURES Labeling video input sources PC Audio These input labels are shown in the input selector. You can label video inputs according to the devices you have connected to the TV. In order to receive sound from a connected PC, plug the audio cable into the back of the television (as shown in the “Connecting a computer” section), and then use the PC/HDMI 3 Audio setting. a Press MENU / C c / B / C c to highlight Setup / Preferences icons and press OK.
CONTROLS AND FEATURES Some early HDMI equipment may not work properly with your HDMI TV. Please try setting the Enable Content Type and INSTAPORT™ options to Off. Adjusting these settings should allow your early HDMI source to operate properly with your television. a b AV Connection Input Labeling PC/HDMI 3 Audio In the Preferences menu, press B or b to select AV Connection and press OK. Press B or b to select HDMI Settings and press OK.
English CONTROLS AND FEATURES Using Personal TV Mode Edit Name You can customize some TV functions as desired and those settings can be saved in one of 4 Personal Modes (A to D). The Personal Mode can be selected from the Quick Menu. You can edit the name of your Personal Mode. Press B or b to select Edit Name and press OK. Edit the desired name by using the software keyboard (see page 55). The maximum number of characters is 25. Personal PIN Setup a Press QUICK to open the Quick Menu.
CONTROLS AND FEATURES Auto Standby When Auto Standby is enabled, the television, when switched off, will automatically switch off (standby mode) all connected REGZA-LINK equipment. This is a new feature that uses CEC technology and allows you to control Toshiba REGZA-LINK compatible devices from the television remote control via HDMI connection (page 17). a When the Enable REGZA-LINK item in the REGZA-LINK Setup menu is set to On, individual functions also set to On will be activated.
English CONTROLS AND FEATURES REGZA-LINK input source selection If a REGZA-LINK device with HDMI switching capability (e.g. AV amplifier) is connected to the HDMI input, you can select another REGZA-LINK device that is connected to the master HDMI device on the input source list. a Press o and a list will appear on screen showing available input sources. b Press b to select the desired input source with REGZA-LINK icon.
CONTROLS AND FEATURES English REGZA-LINK system audio control With your television’s remote control, you can adjust or mute the sound volume of the speakers connected to the television via an AV amplifier. a b Set the Initial Speaker Setting to Amplifier in the REGZA-LINK Setup menu. Confirm that a connected REGZA-LINK device (such as a DVD player, etc) is selected for the AV amplifier input source. NOTE: • These functions depend on the device connected.
English TEXT SERVICES Text services Navigating pages using Auto This television has a multi-page text memory, which takes a few moments to load. It offers two Modes of viewing text – Auto will display Fastext, if available. List will save your four favourite pages. If Fastext is available, four coloured titles will appear at the base of the screen. To access one of the four given subjects, press the relevant coloured button on the remote control.
TEXT SERVICES English Control buttons Below is a guide to the functions of the remote control text buttons. k To display the index/initial page: Press k to access the index/initial page. The one displayed is dependant on the broadcaster. TEXT To display a page of text: Press TEXT to display text. Press again to superimpose text over a normal picture. Press again to return to normal television viewing. Channels cannot be changed until this has been done.
English PROBLEM SOLVING Questions and Answers Q A Below are the answers to some of the most common queries. Q A Q A Why is there no sound or picture? a Check the television is not in standby mode. Check the mains plug and all mains connections. b There is a picture, but why is there little or no colour? Colour System Q A Q A Q A Q A Q A Q A English Germany Auto b With C or c choose between Auto, PAL, SECAM, NTSC 4.43 or NTSC 3.58.
PROBLEM SOLVING What is DVB-T? Q A Why are there vertical stripes on the screen when in PC mode? Q A Why are there horizontal stripes and/or blurred images on the screen when in PC mode? Q A Q A Why when digital subtitles have been selected are they not showing on screen? Q A Q A Digital Video Broadcast via an aerial/antenna. What is DVB-C? Digital Video Broadcast via a cable connection. How are radio channels selected? Press TV on the remote control and select DTV Radio.
English PROBLEM SOLVING Q A Other problems Why are not 3D images displayed? Ensure that there is no object blocking the infrared signals in the infrared reception part of television and 3D glasses. If the infrared data communication between the television and 3D glasses is lost for 5 minutes, the power of 3D glasses is turned off.
INFORMATION English License Information • Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. • HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC. • INSTAPORT™ and INSTAPORT logo are trademarks of Silicon Image, Inc. in the United States and other countries. • YouTube and the YouTube Logo are trademarks of Google Inc.
English INFORMATION Disposal… The following information is only for EU-member states: Disposal of products The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste. Integrated batteries and accumulators can be disposed of with the product. They will be separated at the recycling centres. The black bar indicates that the product was placed on the market after August 13, 2005.
INFORMATION English Information Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket. Signal information for Mini D-sub 15 pin connector Pin No. Signal name Pin No. Signal name Pin No.
English INFORMATION Acceptable video or PC signals through the HDMI terminals The HDMI inputs on this TV only accept VGA, SVGA, XGA, WXGA, and SXGA signal formats which are compliant with VESA as shown in the table below. Since some PCs and HDMI or DVI devices input signals which are different from the resolution and frequency described in the table below, the following phenomenon may occur; incorrect display, false format detection, picture position failure, blur, or judder.
INFORMATION English Media Player Supported Format Media Player Media Format File Extension Photo JPEG .jpg .jpeg Movie MPEG-2 PS MPEG-2 TS .mpg .mpeg .ts MP4 .mp4 .m4v AVI .avi DivX .divx DivX Plus HD .div MKV .mkv DivX Plus HD AVCHD Music Video/Audio codec USB DMS JPEG Yes Video) MPEG-1 Video Video) MPEG-2 Video H.264 (MPEG-4 AVC) Note Yes Data compatibility: JPEG Exif ver 2.
English INFORMATION 3D Support Format (HDMI) Resolution Aspect ratio V.Fraquency H.Fraquency Pixel Clock Frequency 3D Structure 720 × 480p 16:9 59.940/60.000Hz 31.469/31.500kHz 27.000/27.027MHz Side by Side (Full) Side by Side (Half) Top and Bottom 720 × 576p 16:9 50.000Hz 31.250kHz 27.000MHz Side by Side (Full) Side by Side (Half) Top and Bottom 1280 × 720p 16:9 59.940/60.000Hz 90.0/89.91kHz 148.352/148.500MHz Frame Packing 44.955/45.000kHz 74.176/74.
INFORMATION English 3D Support Format (DTV) Video Format Aspect ratio V.Fraquency 3D Structure 480i, 480p 16:9 59.940/60.000Hz Side by Side (Half) 576i, 576p 16:9 50.000Hz Side by Side (Half) 720p 16:9 59.940/60.000Hz Side by Side (Half) 50.000Hz Side by Side (Half) 59.940/60.000Hz Side by Side (Half) 50.000Hz Side by Side (Half) 24.000Hz Side by Side (Half) 30.000Hz Side by Side (Half) 50.000Hz Side by Side (Half) 59.940/60.
English INFORMATION Specifications and accessories Receiving systems DVB-T Broadcast systems/channels UK UHF 21-68 Broadcast systems/channels PAL-I UHF UK21-UK69 France VHF 05-10 (VHF 01-05) UHF 21-69 PAL-B/G UHF E21-E69 VHF E2-E12, S1-S41 Germany VHF 05-12 UHF 21-69 SECAM-L UHF F21-F69 VHF F1-F10, B-Q Austria VHF 05-12 UHF 21-69 SECAM-D/K UHF R21-R69 VHF R1-R12 Power consumption (approx.) 265W Standby power consumption (approx.) 0.3W On-mode power consumption* (approx.
