Quick Setup Guide Before using the TV, please read this guide carefully and keep it for future reference.
Copyright statement © 2020 Hisense Company Ltd. All Rights Reserved. Copyright protected material in this Quick Setup Guide may be owned by Hisense group, its contractors or other third parties. Unless otherwise stated, the exercise of any of the exclusive rights under the copyright laws in relation to the material on this site is not permitted without the consent of the rights owner or as otherwise covered by a statutory license.
This Quick Setup Guide supports the following models: 43C350U 50C350U 55A511FUT 55C350C 65C350U 75C350U Table of Contents What's in the box ............................................................................................................3 Getting started ................................................................................................................4 Step 1. Attach stand or mount....................................................................................4 Step 2.
Congratulations on the purchase of your Toshiba TV! If you would like to know 'all things Toshiba', contact us using the support info: The model and serial number of the TV is located on the back and/or on one side of the TV. We recommend that you record this if you ever need service. Country U.S.A Customer Care Center • Phone: 1-888-9358880 • Hours of Operation: Monday - Friday: 9 AM to 9 PM EST Saturday - Sunday: 9 AM to 6 PM EST • Service Email: Service@hisenseusa.
What's in the box Your Toshiba TV comes with the following items: ● ● ● ● TV power cord remote control 2 base stands ● ● ● ● Quick Setup Guide (this document) 1 set of AAA(1.5Vcc) batteries Important Safety Information and Warranty Card 4 screws (M4×12) IMPORTANT: To prevent accidentally discarding items that came with your TV, be sure to check ALL of the foam in the carton box. · Please check foam for accessories before discarding.
Getting started Step 1. Attach stand or mount Before you start using your TV, attach your TV stand or mount it on the wall. CAUTION: • Disconnect the A/C power cord before installing a stand or a wall mount bracket. • The LED display on your TV is fragile. Make sure the TV screen is not scratched or damaged by hard objects or from pressure. • After the installation is complete, make sure the TV is steady on a table or firmly attached to a wall mount, before removing all protective film, if any.
Attach the wall mount bracket (not included) Before you begin the third-party manufacturer instructions, be sure to do the following things: Screw (not included) 1. Place the TV face down on a clean, safe and cushioned surface. 2. Remove the TV stand if you have already attached it. 3. Place spacers (not included) in the corresponding bracket holes. Spacer (not included) Bracket (not included) CAUTION: • Follow instructions provided with the wall mount bracket.
Step 2. Connect devices to your TV Check to ensure that you have connected right cables for right ports securely. Loose connections can affect the quality of the picture image and color.
TV label Port Cable External Equipment VHF/UHF Antenna ANT/CABLE ANT OUT Antenna VCR DVD Player/Recorder AV IN L R Yellow Video Camera Set-top Box Satellite antenna cable Satellite Receiver White Red DIGITAL AUDIO OUT Audio ���� Connect an outdoor VHF/ UHF antenna. Connect a ������� Multimedia Interface (HDMI) cable from an external device. HDMI VIDEO Brief Description Speaker Connect a composite video cable and left-right audio cables from an external AV device.
TV label Port Cable External Equipment Brief Description Connect a USB device for browsing photos, music and movies. Hard disks with a total current consumption or impulse current consumption greater than 500mA are not supported. USB Connect an Ethernet cable to access a network or the Internet. The TV also has a wireless connectivity feature.
Step 3. Get your remote ready The following table shows the buttons on your remote control and describes what they are for. 1 12 1 POWER: Turn your TV on or off 2 Voice button: Receive the voice 3 Select: 2 �������������� (up/down/left/right navigation buttons) 4 D-pad 3 5 Back: Return to the previous place in the menu or app 4 6 REWIND: Rewind streaming video, jump to 13 the previous audio track or selection, jump up one page in menus.
Insert the batteries Remove the battery door and insert the two AAA batteries into your Alexa Voice Remote. Important information about the remote and batteries • Discard batteries in a designated disposal area. Do not throw them into a fire. • Remove old batteries immediately to prevent them from leaking into the battery compartment. • If you do not intend to use the remote control for a long time, then remove the batteries. • Battery chemicals can cause a rash.
Using your cable set-top box or satellite receiver remote as a ‘universal’ remote If you prefer to use your Cable Set-top Box or Satellite Receiver Remote as a ‘universal’ remote, then visit the Support page to view a list of the codes.
Step 4. Power on the TV Connect your power cord to the TV and plug it into a power outlet. Your TV will display a launch screen showing the Toshiba logo. Power Cord Wall Outlet Step 5. Complete the first-time setup The first time you turn on your TV, there is a guided setup to make it easy to connect your TV to the Internet and complete the setup of your TV. Your TV will automatically pair with your new Voice Remote with Alexa. 1.
Troubleshooting If you are having trouble with your TV, first try turning it off and on again. If this does not fix the problem, check the tips in the following table. If your problem is not listed in the following table, then contact us at one of the phone numbers on Page 2. Issues Possible solutions No sound or picture • Check if the power cord is plugged into a powered AC outlet. • Press the Power button on the remote control to activate the unit from 'Standby' mode.
Product Specifications Model Name Dimension (W × H × D) Weight 55C350C Without Stand 48.5 × 28.0 × 2.9 inches (1 233 × 711 × 74 mm) With Stand 48.5 × 29.8 × 9.3 inches (1 233 × 758 × 236 mm) Without Stand 24.9 lbs (11.3 kg) With Stand 25.6 lbs (11.6 kg) TV Stand Width(W × D) 37.0 × 9.3 inches (940 × 236 mm) Class 55" (139.7 cm) Active Screen Size (Diagonal) 54.6 inches (138.
Certification and Compliance FCC Notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Vision, and the double-D symbol are trademarks of Dolby Laboratories. C������������ works. Copyright © 2012-2019 Dolby Laboratories. All rights reserved. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
