TOSHIBA Leading innovation _ Foran Overviewof stepsfor settingupyour newTV,see page9. Note:TOdJsp!ay a HighDefinitionpicture,the TVmustbereceiving HighDefinitionsignal(suchasanover:the-airHighDe!initionIV broadcast, a HighDefinitiondigitalcableprogram,or a High Definitiondigitalsatelliteprogram),Fordetails,p!easecontactYOUr TVantennainstalbr;cableprovider;orsatelliteprovider.
Dear Customer, Thank you for purchasing this Toshiba LCD TV. This manual will help you use the many exciting features of your new LCD TV. Before operating your LCD TV, please read this manual completely, and keep it nearby for future reference. Safety Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER fOR BACK), NO USER-SERViCEABLE PARTS iNSiDE.
Important Safety Instructions * ALWAYS contact a service technician to inspect the TV any time it has been damaged or dropped. 1) 2) 3) 4) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. 5) Do not use this apparatus 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
25) Never block or cover the slots or openings in the TV cabinet back, bottom, and sides. Never place the TV: * on a bed, sofa, rug, or similar surface; * too close to drapes, curtains, or walls; or ° in a confined space such as a bookcase, built-in cabinet, or any other place with poor ventilation. The slots and openings are provided to protect the TV from overheating and to help maintain reliable operation of the TV. Leave a space of at least 4 (four) inches around the TV.
Service 41) To Display yourLCDTV using a Wall Bracket: WARNING: RISK OF ELECTRIC SHOCKZ Never attempt to service the TV yourself. Opening and removing the covers may expose you to dangerous voltage or other hazards. Failure to follow this WARN ING may result in death or serious injury. Refer all servicing not specified in this manual to a Toshiba Authorized Service Center. 42) If you have the TV serviced: • Ask the service technician to use only replacement parts specified by the manufacturer.
ENERGY STAR ® qualified TV. Products that earn the ENERGY STAR prevent green house gas emissions by meeting strict guidelines set by the U.S. Environmental Protection Agency. ENERGY STAR and the ENERGY STAR mark ComplianceStatement(Part15): are registered The Toshiba 40XV648U, 46XV648U and 52XV648U Televisions comply with Part 15 of the FCC rules.
Important Safety Instructions Installation, ...................... Care, and Service 3 ..................... Choosing a location for your LCD TV 3 ................. Chapter 1: Introduction ........................... Features of your net&_ TV .......................... Overview of steps for installing, setting 5 9 9 TV back panel connections ........................ Chapter 2: Connecting your IV ..................... Overview of cable types ..........................
REGZA-LINK ¢_9input source selection ............ 49 Amplifier VOLUME and MUTE controls ......... Other REGZA-LINK c_9functions ................. REGZA-LINK _ PC Link ........................ Using the HDMU M settings feature ................. Setting the HDMI _x_audio mode ................... 51 51 Displaying TV status information .................. Understanding the auto power off feature .......... 52 52 Understanding the last mode memory feature .......
Features of your new TV The following are just a few of the many features of your new Toshiba widescreen, HD, LCD TV: exciting integrated • Integrated digital tuning (8VSB ATSC and QAM) eliminates the need for a separate digital converter set-top box (in most cases). • 1080p output resolution. • Three HDMI _Mdigital, high-definition multimedia interfaces with 1080p input support (_¢ page 15).
TV front and side panel controls and connections Model 46XV648U is used in this manual for illustration purposes. TV front 23 C0ntroJpanel 1 2 3 TOSHIBA Illumination The TOSHIBA logo will be illuminated. See "Selecting the TOSHIBA Illumination mode" on page 30 for additional information. Auto Brightness Sensor--This sensor will detect the ambient light conditions to optimize the backlighting levels. See "Using the Auto Brightness Sensor" on page 55 for additional information.
TV back panel connections For an explanation of cable types and connections, see pages 12-18. TVback ! wer C ;r0c FIXED AUDIO 2 3 4 8 1 2 3 HDMI TM IN -- High-Definition Multimedia Interface input receives digital audio and uncompressed digital video from an HDMI device or uncompressed digital video from a DVI device. Also see item 5. HDMI connection is necessary to receive 1080p signals.
HDMr cable (with HDMI Logo"JF-J_B|") Overview of cable types Cables can be purchased from most stores that sell audio/video devices. Before purchasing any cables, be sure of connector types required by your devices and the length of each cable. HDMI (High-Definition Multimedia Interface) cable is for use with devices with an HDMI output. An HDMI cable delivers digital audio and video in its native format.
Connectinga VCR(or a VCRwith S-video)andantenna, CableTV or Camcorder FromOa ! romO or antenna TV upper hack panel Cable box m ,.o.:8 on TV right side paueJ _ @ VIDEO 2 inputs TV _anel ':::_" L ANTICABLE ................. °| _ _ You will need: • coaxial cables • standard A/V _I_ To _iew basic and premium Cable channels: Turn OFF the VCR. Select the ANT/CABLE video input source on the TV.
Connectinga DVDplayerwith ColorStream ® (componentvideo), a VCR,anda satellite receiver Your TV has two sets of ColorStream ¢')(component video) inputs.
Connectingan HDMI or DVI deviceto the HDMIinput TM The HDMI input on your TV recewes digital audio and uncompressed digital video from an HDMI source device, or uncompressed digital video from a DVI (Digital Visual Interface) source device. This input is designed to accept HDCP (HighBandwidth Digital-Content Protection) program material in digital form from EIA/CEA-861-Ecompliant[q consumer electronic devices (such as a settop box or DVD player with HDMI or DVI output).
REGZA-LINK ® connection You can control a REGZA-LINK pages 49-50. the basic functions ®compatible audio of connected audio/video devices using the TV's remote receiver or playback device. For an explanation of setup control if you connect and operations, see TVupperhackpanel =_,' TVrightsidepanel J Playbackdevice (REGZA-LINK °VD player,elc.
damage speakers or headphones. THIS DAMAGE IS NOT COVERED BY YOUR WARRANTX Connectinga digital audio system The DIGITAL AUDIO OUT terminal may not output some digital audio sources because of copy restrictions. The TV's DIGITAL AUDIO OUT terminal outputs a Dolby ¢'_*Digital EIIOOLBY_ia,_ii or 2-channel down-mixed" PCM (pulse-code modulation) signal for use with an external Dolby ¢'_Digital decoder or other external audio system with optical audio input.
Connecting a personal computer ° Signal names for mini D-sub 15-pin connector (PC) With either the PC IN or HDMI connection, you can watch your computer's display on the TV and hear the sound from the TV's speakers. To connect a PC to the PC IN terminal on the TV: When connecting a PC to the PC IN terminal on the TV, use an analog RGB (15-pin) computer cable and a PC audio cable. TV= =upper iN_,-.
Preparing the remote control for use Your TV remote control can operate your TV and many other devices such as cable converter boxes, satellite receivers, VCRs, DVD players, and HTIBs (home theater in a box), even if they are different brands. If you have a Toshiba device: Your TV remote control is preprogrammed most Toshiba devices (_' page 22). Installing the remote control batteries 1 Slide the battery control.
Learningabout the remote control 1 POWER turns the TV on and off. When the green LED indicator illuminated. the TV is on, on the TV front will be The buttons used for operating the TV only are described here. For the REGZA-LINK remote control 2 FREEZE freezes the picture. Press the moving picture (_ page 38). functions, see the section "Using REGZA-LINK ®" (_ page 49). For a complete list of the remote control's functions, see the remote control functional key chart (_ page 22).
Usingthe remote control to control your other devices If you have a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate, you must first program the remote control to recognize the device (if you have not already done so) (_ page 23). To use your T¥ remote ('ontrol to operate: • Cable converter box or satellite receiver, SELECT switch to CABLE/SAT. °VCR, set the MODE SELECT ° DVD player to AUX2.
Remote Control functional key chart i Power Power Power TV .... !!_@_!_i!i_!!]_!!!!!!!!,!!!i!_!i!!!,!!!!!L_L!!.
Programmingthe remote control to control your other devices Your Toshiba TV remote control is preprogrammed to operate most Toshiba devices. To program your TV remote control to operate a non-Toshiba device (or a Toshiba device that it is not preprogrammed to operate), follow the steps below. For details on using the remote control to operate the device, see page 21. Some newer VCRs respond to either of two codes. These VCRs have a switch labeled "VCR1/VCR2.
Remotecontrol codes In some cases, you may not be able to operate your device with the TV remote control. Your device may use a code that is not recognized by the TV remote control. If this happens, use the device's remote control.
Audiovox Bell & Howell Broksonic Calix Carver CCE Citizen Colortyme Craig Curtis Mathes Daewoo Daytron Denon Dimensia Electrohome Emerson Fisher Fuji Funai Garrard GE Go Video Goldstar Gradiente Harman Kardon Hitachi JBL JC Penney Jensen JVC Kenwood Kodak LG Lloyds Logik LXI Magnasonic Magnavox Marantz Memorex MGA MGN 039, 058, 010 O07, 068 008, 017 010 O26 019 009, 010, 013, 014, 057,073 005 009, 010, 065, 079 001,005, 014, 040, 056, 057 011, 013, 018, 019, 078 063 001, 048 010, 020, 003, 008, 01
R Main menu layout SETUP To open the main menus (illustrated on the remote control or TV control PICTURE Picture Reset Mode 39 39 Brightness 39 Color 39 Tint 39 Sharpness 39 Picture Settings Visualization 53 40 TheaterLock 40 MTS Bass 42 42 Treble 42 Balance 42 Advanced Sound Settings Dolby Volume Dynamic 56 43 Range Control 57 33 Favorites 33 Browser Player Control On Timer 27 In 28 Auto Tuning 28 Manual 28 Tuning TV Settings 29 Manual Setting AV Colmection 2
QuickSetupfromthe SETUPmenu Initial Setup When you first turn on or reset the TV, the Initial window will appear. 1 In the Menu Language your 2 3 preferred field, press Setup change various basic TV settings item located under the SETUP 1 2 Press M_u to open the SETUP 3 A confirmation message will appear on the screen, press < or • to select Yes and press _. 4 Other procedures are the same as Initial Setup (_ left-hand column). < or • to select language.
Configuringthe antenna input source for the ANT/CABLEterminal 1 2 3 1 2 From the SETUP menu, highlight ANT/CABLE In. Press < or • to select the input source (Antenna or Cable) for the ANT/CABLE input on the TV and press Ex,]. Programmingchannels into the TV's channel memory Manual Tuning When you press _ or _j on the remote control or TV control panel, your TV will stop only on the channels you programmed into the TV's channel memory.
Setting channel skip Setting video input skip To prevent certain channels from being channel positions can be skipped. viewed, 1 From the SETUP press @. 2 Press • or • to select Channel Options @. The list of channels will appear. menu, highlight TV Settings If you set a video input source to be skipped, it will be skipped over when selecting the input by repeatedly pressing _D. and To turn and press 1 Tune to the video input source to be skipped.
Setting the time zone Selecting the Power-On Mode The Time Zone setup will allow you to specify the correct time zone for your region. This feature will allow the TV status information to show the correct You can select either Power-Saving or Fast mode. ° Power-Saving mode keeps power consumption in standby mode to below 1W. As a result, it takes a bit longer for the TV to turn on. ° Fast mode increases power consumption in standby mode. As a result, the TV will turn on more quickly.
Viewing the system status 1 From the SETUP menu, Information. 2 Press _ to display highlight the system System information. Reset Factory Defaults You can reset all settings default values. and channels 1 From the SETUP press @. 2 Enter your {3 Press < or • to select Yes and press turn off automatically. menu, highlight to their factory Reset TV and PIN code (if PIN code has been set). @. The TV will To cancel the reset: Press < or • to select No and press _. 31 XV648UO8CO5.
To select a REGZA-LINK Selecting the video input source to view 1 Press _) on the remote And then either: a) Press control or TV control an appropriate HDMI _) Press • to display f®r that input. 3 If there are multiple REGZA-LINK ® devices on the input, use • or • to highlight a particular device. 4 Press _ panel. 0-8; or or • to highlight input. To select the video input source to x4ew: 1 _) Press • ®dex@e: to select the list of REGZA-LINK the device and change ®devices inputs.
To Tuning channels 1 2 Tuning channels using the Channel Browser TM 3 The Channel Browser _'_provides an easy navigation interface for all your channels and inputs. This feature allows you to: • Navigate the contents of all of your inputs. • Keep a list of your favorite channels (see "Favorites Browser," below). 4 • Keep a history viewed.
Elementsof the ChannelBrowserTM I 2 3 I 4 J ! 6 Addingand clearing channels and inputs in the HistoryList 5 1 Current list (History, ANT/CABLE, Favorites, or REGZA-LINK) 2 Input 3 Channel or input currently 4 Channel browser or input that is currently 5 Channels stored 6 Input Inputs, type being in the History viewed highlighted in the Adding channels and inputs to the History List: As a channel or input is tuned, the Channel Browser _'_ adds it to the History List and displa
Settingthe ChannelTuningMode This feature allows you to choose how tuning handled for analog and digital channels when in Antenna mode. Note: To use this feature, ANT/CABLE Antenna (_,v page 28). The channel tuning mode has three will be the TV is In must be set to options.
Selectingthe picturesize You can view many program formats in a variety of picture sizes--Native, 4:3, Full, TheaterWide 1, TheaterWide 2, TheaterWide 3, Normal and Dot by Dot. Note: The "picture size" illustrations are examples only. The format of the image (in any of the picture sizes) will vary depending on the format of the signal you are currently watching. Select the picture size that displays the current program the way that looks best to you. You can save separate input on your TV.
Native (for480i(HDMI),480p(HDMI),720p,1080i,and1080psignal programs) TheaterWide 1 (for4:3formatprograms) 1© o iO00 _000 Tile center of the picture remains close to its original proportion, but the left and right edges are stretched wider to fill the screen. ° If receiving a 1080i, 1080p, 720p, 480i (HDMI), or 480p (HDMI) signal program, Native mode scales the video to display the entire picture within the borders of the screen (i.e. no overscanning).
Usingthe 4:3 Stretch Scrolling the picture If the edges of the picture image position. When 4:3 Stretch is activated, the size switching changes 4:3 programs into full screen picture. system Note: You can adjust the picture position when the picture size is set to TheaterWide 2 or TheaterWide 3. 1 From the PREFERENCES Stretch. 4:3 1 2 Press 2 3 From the SETUP and press _.
Adjustingthe picturequality Adjusting the picture The picture quality you adjusted under a certain picture mode is saved to the picture mode of same name. Selectingthe picture mode You can select your desired picture settings following modes, as described below.
Usingthe TheaterLock feature TM The TheaterLock feature allows you to "lock" items in the PICTURE menu that affect the picture display. These items will be grayed out and unavailable when the TheaterLock setting is set to "On". 1 Fromthe 2 Press PICTUREmenu, < or • to select highlight TheaterLock On, and then press _. Viewing the Control Visualization window This feature displays a histogram and control illustrating the brightness of the TV.
÷ DigitalCCSettings CC Selector You can customize the closed caption display characteristics by changing the background color, opacity, text size, type, edge, and color. You can use the CC and Digital Audio Selectors Note: * This feature is available ° for digital channels only. You cannot set the Caption Text and Background same color. Caption Size Auto, Small, Standard, as the caption services (if available).
Selectingstereo/SAPbroadcasts Adjusting the audio Muting the sound Press M_Eon the remote control to partially reduce (1/2 MUTE) or turn off (MUTE) the sound. Each time you press M_E,the mute mode will change in the following order: r-.i/2 Mute --. Mute --*Volume--_-_ The multi-channel TV sound (MTS) feature allows you to output high-fidelity stereo sound.
Selecting the optical audio output format You can use this feature to select the optical audio output format when you connect a Dolby Digital decoder or other digital audio system to the DIGITAL AUDIO OUT terminal on the TV. 1 2 3 4 Tune to a digital From the SETUP and press @. Press • or • source on the ANT/CABLE menu, to select highlight Digital input.
BlockingTV programsandmoviesby rating(V-Chip) Some TV programs and movies include signals that classify the content of the program (violence, sex, dialogue, language). The V-Chip feature in this TV detects the signals and blocks the programs according to the ratings you select. (For rating descriptions, see the tables on the next page.) Note: Rating blocking is a function of the V-Chip feature in this TV, which supports the U.S. V-Chip system only.
Note: Independent ratingsystemforbroadcasters mating: D_ cri_!lO _ _ _ th'e:m_ : Mature Audience Only (This program is specifically designed to be viewed by adults and therefore may be unsuitable for children under 17.) L) Crude or indecent language S) Explicit sexual activity V) Graphic violence TV-MA Parents Strongly Cautioned (This program contains some material that many parents would find unsuitable for children under 14 years of age.
Using the GameTimer®feature Locking channels You can use the GameTimer With the Lock feature, you can lock specific channels. The locked channels can only be accessed by entering the PIN. 1 From the SETUP press @. 2 Press • or • to select Channel Options @. The list of channels will appear. menu, highlight TV Settings and ®to set a time limit for playing a video game (30-120 minutes).
Usingthe PC settings feature Setting the PC Audio You can view an image from a PC on the TV screen. When a PC is connected to the TV's PC IN tel_ninal, you can use the PC Settings feature to make adjustments to the image. If the edges of the picture are cut off, readjust the Horizontal Position and Vertical Position. If the This function allows you to output sound from your when connecting using the PC IN terminal and an analog RGB cable. picture is affected by interference, Phase and Sampling Clock.
Settingthe OnTimer You can set the on timer to automatically to a preset channel or input at a preset Settingthe SleepTimer turn on the TV time. To activate the On Timer: 1 2 From the APPLICATIONS Timer and press @. Press • press or • to select • or • to select menu, Enable highlight On Timer, On and then On. Note: If the Enable On Timer is set to Off, other menus under On Timer cannot be changed.
REGZA-LINK Using REGZA-LINK ® This feature uses CEC technology and allows you to control Toshiba REGZA-LINK ® compatible devices from the TV remote via HDMI connection (_#r' page 16). When Enable REGZA-LINK in the REGZA-LINK Setup menu is set to On, the following functions will be enabled. REGZA-LINK _ Player Control menu functions: 1 From the APPLICATIONS menu, highlight REGZA-LINK Player Control and press _. 2 Press • or • to select and press _.
AmplifierVOLUMEand MUTE controls To set the REGZA-LINK With your TV's remote control, you can adjust or mute the sound volume of your amplifier. First, set the MODE SELECT switch on the remote control to IV. • _ _ adjust the volume . M_Eturns off the sound. to Amplifier in the REGZA- You can also use this function when the amplifier is connected to the TV's DIGITAL AUDIO OUT terminal (not HDMI connection). In this case, select a digital audio input mode on the amplifier.
Usingthe HDMI settings feature Setting the HDMI audio mode This menu consists of the following items (new HDMI capabilities) and will be grayed out on non-HDMI inputs. Some HDMI legacy sources may not work properly with your HDMI TV, please try setting the following options (Deep Color, Lip Sync, and INSTAPORT TM) to Off. Adjusting these settings should allow your HDMI legacy source to operate properly with your TV.
Displaying TV status information To display TV status information using RECALL: Press RE_LLon the remote control. The following information will display (if applicable): • Current input (ANT/CABLE, Video 1, etc.) ° If ANT/CABLE is the current input, either "CABLE" (for cable TV) or "ANT" (for over-the-air broadcasts).
Using the Dynamic Contrast Usingthe advanced picture settings features Dynamic Contrast detects changes in picture quality that affect the appearance of your contrast settings and then automatically adjusts the video. Note: Some of the Advanced Picture Settings features will not be available for adjustment when the Picture Mode is set to AutoView. 1 From the PICTURE menu, highlight Picture Settings and press _.
UsingExpertMode Usingthe MPEGNRfeature This feature individually enables/disables Green, and Blue components of the picture more accurate adjustment of each color. the Red, to allow for 1 From the PICTURE menu, highlight Picture Settings and press _. Advanced 2 Press • or • to select Expert and then press 3 Press • either 4 Press 5 Press • to select Color or Tint, press adjust, and then press EXiT or • to select ,< or • to select Mode, Red, Green or Blue.
Usingthe Auto BrightnessSensor Usingthe ColorMaster feature When the Auto Brightness Sensor feature is set to On, the TV will automatically optimize the backlighting levels to suit ambient light conditions. The ColorMaster standard colors. 1 3 From the PICTURE menu, highlight Advanced Picture Settings and press _. Press • or • to select Auto Brightness Sensor Settings and press _. Press • or • to highlight Auto Brightness Sensor. 4 Press _ or • to select On or Off and press _.
Selectingthe colortemperature To adjust the color temperature: 1 From the PICTURE menu, highlight Picture Settings and press @. 2 Press • or • to select Color Temperature 3 Press • 4 Press < or • to adjust the level. The adjustment range is 0 (warm) to 10 (cool). Then, press _ST. or • to highlight Advanced and press Color Temperature. Note: If the Picture Mode is set to AutoView, adjustment range is -5 to +5.
Basicoperation Usingthe Media Player To set Auto Start: The TV allows device. you to enjoy Note: ° Do not insert/remove photos stored on a USB the USB device while in use. ° M_uis not available during playback. 1 From the APPLICATIONS Player and press @. 2 Press • 3 Press _ or • to select On. or • to highlight menu, highlight Media Auto Start.
Viewing JPEGfiles To set the Slideshow To view in Single View mode: 1 2 When the thumbnail view appears after starting the Media Player (_#r' page 57), press "i • • or • to select a file or folder. Press @ to begin viewing the selected folder. Press c,<_T,to return 3 Press • to view previous the selected to the previous 1 To switch layer. the next file, or press From the PREFERENCES menu, highlight Viewer Setup and press _.
Generaltroubleshooting Before calling a service technician, please check this chapter for a possible cause of the problem and some solutions you can try. Black boxon-screen • Theclosedcaptionfeatureis set to oneof theText modes(T1,T2,T3,or T4).Settheclosedcaptionfeature to Off(_-,-_-page 40).
• Your TV remote control may not operate certain features on your external device. Refer to the owner's manual for your other device to determine its available features. If your TV remote control does not operate a specific feature on another device, use the remote control that came with the device. • If the TV still does not act as expected, use the Reset Factory Defaults procedure (_-_--_ page 31). Channel tuning problems Make sure the remote control is set to the correct device mode (_-_--_ page23).
LEDindications The Power and On Timer LED lights indicate the TV's status, as described on the TV front below. TV front ON TIMER POWER On Timer Power LED Indication Power LED • Green is ON (solid) The TV is operating properly. • Orange is ON (solid) Standby with Power-On Mode set to Fast. See "Selecting the Power-On Mode" (_¢ page 30). • Green blinks three times TV is powering up. Wait several green LED stops blinking. • Green blinks seconds until the Abnormal operation of BUS line.
HDMI Specifications Note: ° This model complies with the specifications below. ° Designs and specifications without notice. ° listed are subject to change This model may not be compatible with features and/or specifications that may be added in the future.
Acceptable signal formats for PC IN and HDMI terminals PCIN signalformats Note: ° The PC IN on this TV only accepts signal formats which are compliant with VESA-DMT as shown in the table below. Since some PCs have input signals that are different from the resolution and frequency described in the table below, the following phenomenon may occur: incorrect display, false format detection, picture position failure, blur, or judder.
HDMIsignal formats Note: ° The HDMI inputs on this TV only accept VGA, SVGA, XGA, WXGA, and SXGA signal formats which are compliant with VESA as shown in the table below. Since some PCs and HDMI or DVI devices have input signals that are different from the resolution and frequency described in the table below, the following phenomenon may occur: incorrect display, false format detection, picture position failure, blur, or judder.
Limited United States Warranty for LCD Televisions 26" and Larger Toshiba America Consumer Products, L.L.C. ("TACP") makes the following limited warranties to original consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS LCD TELEVISION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE. LCD TELEVISIONS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, GUARANTEES, AGREEMENTS, AND SIMILAR OBLIGATIONS OF TACP WITH RESPECT TO THE REPAIR OR REPLACEMENT OF ANY PARTS. IN NO EVENT SHALL TACP BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, BUSINESS INTERRUPTION, OR MODIFICATION OR ERASURE OF RECORDED DATA CAUSED BY USE, MISUSE OR INABILITY TO USE THIS LCD TELEVISION).
Rental Units The warranty for Television rental units begins with the date of first rental or thirty (30) days from the date of shipment to the rental firm, whichever comes first. Your Responsibility THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING CONDITIONS: (1) You must provide your bill of sale or other proof of purchase. (2) All warranty servicing of this Television must be performed by an ASP.
USE THE TELEVISION, EVEN IF ANY OF THE RELATED PARTIES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR OF ANY CLAIM BY ANY OTHER PARTY, AND FURTHER DISCLAIM ANY AND ALL LIABILITY, CONSEQUENCES AND DAMAGES THAT MAY ARISE OR RESULT FROM THE USE OF THE TELEVISION IN ANY CRITICAL APPLICATIONS, No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in any manner whatsoever.
G R GameTimer A Antenna input configuration ........... 28 H ® ................................... Audio quality adjustments .............. 42 HDMI audio Audio system connection ............... 17 HDMI settings Auto Aspect Auto .................................... Brightness Auto power Sensor .................. off ................................ Auto Tuning .................................... AutoView TM ..................................... 38 51 51 51 51 51 RGB Range .....
TOSHIBA A_ER|CA CONSUMER PRODUCTS_ L,L,C, Corporate Headquarters: 82 TOTOWA ROAD, WAYNE, NJ 07470, U.S.A. NATIONAL SERVICE DIVISION: 1420-B TOSHIBA DRIVE, LEBANON, TN 37087, U.S.A. TOSHIBA OF HEAD OFFICE: 191 McNABB SERVICE CENTERS: TORONTO: 191 McNABB MANUFACTURED TOSHIBA CANADA LTD. STREET, MARKHAM, STREET, MARKHAM, ONTARIO, L3R 8H2, CANADA ONTARIO L3R 8H2, CANADA TEL: (9(}5) 470-5400 TEL: (905) 470- 8400 BY ELECTROMEX, S.A. DE C.V.
