SerialNo.
Dear Customer, Thank you for purchashlg this Toshiba T_LThis manual wifl help you use the many exciting features of your new TV. Before operating the TV, please read this manual completely, and keep it nearby for future reference. Safety Precautions It MakesADifference WhereYourTVStands Congratnmations on yonr purchase! As yon enjoy yonr new TV, keep these safety tips in mind: WARNUNG TO REDUCE THE RmSKOF FmBEOR ELECTRmCSHOCK, DO NOT EXPOSE THinSAPPMANCE TO BAroNOR MOmSTUBE.
installation, Care, arid Service mmportant Safety mnstructions 1) Read these instructions. 2) Keep these instructions. Foilow these recommendations and precautions and heed all warnings when instaIIing your TV: 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus 16) Never modify this equipment. Changes or modifications may void: a) the warranty', and b) the user's authority to operate this equipment under the rules of the Federal Commtlnications Commission.
24] Always operate this equipment from a 120 VAC, 60 Hz power source only. 30} [_;is item applies te pr_;ectien TVs only] if the air temperature rises suddenly (for example, when the TV is first delivered], condensation may form on the lenses, This can make the picture appear distorted or the color appear faded• If this happens, turn off the TV for 6 to 7 hours to allow the condensation to evaporate.
important Safety Precautions (Model Toshiba TV modeH57H84 has a spHitcabinet feature that dhows disassembHyof the cabinet into two sections during instaHHation. For detaiHs,pHeaserefer to the insert tithed "DisassembHyi ReassembHyinstructions for SpHitCabinet Feature" that accompanied this owner's manuaHin the accessory pack. if you do not have the insert, you can downHoad a copy of it from our Web site (www.tosMba.comitacp in the U.S.A. or www.tosMba.ca in Canada}.
Impo_ant Safety information ............................. 2-5 introduction ................................................................ _Hcome to 3\)shiba ......................................................... 7 7 Exploring !:our _ew TV ................................................... 7 Connecting your TV .................................................. 8 Cormecting a VCR .......................................................... Comlecting a cable coIiverter box ....................
m Welcome to Toshiba Congratulation!! You have purchased one of"the finest proiection TVs on the market. Tire goal of"tills manual is to guide you througl: setting up and operating your Tos}:iba TV as quickly as possible. This manual applies to models 46H84, 51 H84 and 57H84. Bef_re you start reading, check yx_urmode_ and serial rmmbers o:1 die back of"the TV. Write these numbers in the space provided on d:e f'ront cover oF :_:is manualfbr yourrecords.
Connecting your TV Note: Cab/esaf_ not supp/iedv,aitil your 71/ @ Coaxial cable is the cable that comes in from ff}ur antenna, cable TV service, or cable converter box. Coaxial cable uses "F" connectors • Standard AJV (audio/vldeo) cables usually come in sets of three, and are typically co_or-coded according to use: ye_iow f;_r video, red fi)r stere() right audio, and white for stereo lef'_ (or mann) audio. On your TV's back pand, t}_estandard A!V inputs are cok)r
Connecting T!_i._; com_ectio_l programs, a VCR allows play or record you on ro watch local the VCP, while channels watching and TV, video and record Note.
Connecting a cabme converter box and VCR TLis connection allows you to watct_ and record basic and premium cable cha,mds, watch videotapes, and record one channel while watching ai_other cl_a*mel.To watch basic cable and use the TV's f'eatures, select ANT- 1. To view premium channels or record with the VCR_ select ANT-2, tune the TV to channel 3 or 4 (whichever d_anne! is vacant in your area), and use the converter box to change channels.
Connecting and a VCR a DVD player or satellite receiver This connection allows yot* to watcll DVD/satellite, VCR, and TV programs, a*ld record one TV channd while watc!_ing anov{ser channel Note: You will need: component video or HDM/, use an S-video cab/e, r/f your DVD pbyer has component " two . (or t{_ree, if satellite receiver is used) coaxial cables _sed) S-video cable (between the TV and D\fD qualilyfrom a DVD p/ayer or sate/tire i_r'e/ver without video, see page Z2, If your DVD p/ay
Connecting a DVD player with (component video) and a VCR TLis connection allows you and record TV programs. ro watc5 [)V[), ComorStream \ICR, and TV _ program.% Your TV Las ColorStream _ (component video) inputs. Connecting your TV to a [)VD player with component video inputs (such as a :l_oshiba DVD player with ColorStream _) can greatly enhance picture quality and realism.
Connecting a DTV receiver/set-top box with ColorStream (component video) and a VCR This comlection allows you to watch DTV (digital TV), VCR, and TV programs, and record DTV and TV programs. Your TV has ColorStream (compone*lt video) irlputs. Connecting your TV to a DTV receiver with component video inputs can greatly enhance picture quality and realism. - To record and watct_ a DTV program, select HNE _N on the \/CR_ and selec_ ColorStream HD2 (<_rVIDEO 1 f'or a nonColorStream connection) on the TV (see 'S
Connecting two VCRs This co,mection allows you m record (dub/edir) fFom one VCR to another VCR while watching a videotape. You can also record from one TV channel while watching another TV channel. You will need: Note; /f you have VCfRs vvHf_Swide< use S-video cables #_stead of standard video cab/es for better picture perforTnanc.
Connecting a HDM! device to the HDM! input Notes." HDM][ 1 (High Definition Multimedia ]nterf'ace) is the first all digital tmcompsessed standard. One iack supports bod_ video and attdio information.
Connecting a DV! device * one HDM_-D\q conversion one pair of"standard to the HDM! input cable If the external device has DVi output only, use a HDMbDVHconversiort cable to connect to the HDMI jack on the TV. Also, connect the Audio out signal front the external device (set-top box or DVD player)to the AUDIO IN jacks beside the HDMI input.
Usin 9 the Preparing remote control the remote ¢ontro_ for use %_r TV remote control can operate yot_r TV a_d most cable converter boxes, satellite receivers, VCRs, DVD players, and HTIBs (home theater in a box), even if"they are different brax_ds. If you have a Toshiba device: _)ur T\ 7 remote con{rol is preprogrammed devices. See page 20.
Programming the remote control to operate a cable converter box, sateRRe receiver, VCR, DVD player, or HTIB (home theater in a bo×) Your Toshiba TV remote control is preprogmmmed to operate most Toshiba devices. To program your T\/" remote control to operate a non-Tosi_iba device (or a Toshiba device that it is not preprogrammed to operate), f'ollow the steps below. For derails on using the remote control to operate the device, see page 2(L RECALL POWER -- 1.
Remote control codes (cont.} Hkac}*i:005,032, 033, 034, O35 SateRRe receiver (cont.
Using the remote controm to operate a cabme converter box, sateNte receiver, VCR, DVD player, or HTIB (home theater in a box[} Ifyuu have a nun-Tusiaiba device or a Tushiba device that the remute control is not preprogrammed to uperate, you must first program the remote cuntrul to recognize the device (if you have not already done so). See pages 18 and 19. Te use your TV remote * cable converter CBL/SAT.
Learning about the remote control The buttom; _sed fbr operating tile TV only are described here. POWERtuttis the TV on and off RECAkLdisplays screen iMbrmation (page 57) STEEPsets the TV to turn off at a specific time (page 51 ) TV/VmDEOselects video input source (page 49) MUTEmutes the sound (page 53) DeviceSwitchswk&es bep_vee_T\_ CLB/SMTVCR,a_d DVD (Pages18-2(t) Set to 'T\/" to control tile T\L OH(chmmeBA tr cycles through programmed channels (page 25) Ohalmel Numbers (0-9, 100) allow direct access to c
Setting up your TV Learning about the menu system After you have installed the batte*ies and programmed the remote control, you will need to set some preferences on the TV using the menu system. You can access the mem_ using the buttons on your TV or remote control. 1. Press MENU to display the memt system. 2. Press @ or _ to select ment.t. TV front panel 3. Press A or _' to select an item, then press ENTER. 4. Press A or _' to select or adjust a setting.
Changing the on-semen display language You can choose f:rom three different languages (English, French and Spanish) fi_r the on-screen display of ad_usmlem menus and messages. TV front panel To selec_ a language: 1. Press MENU, and dlen press _ or _ undl d_e SET UP mem_ appears. 2. Press A or _' ro highlight LANGUAGE, and then press ENTER to display the pull-down menu. ww,_ MOVE J_f :gET -- TV/VIDEO -- MENU -- A_ -- ENTER 3. Press A or T to highlight your desired language.
Addin 9 channels to the TV's memory Wl_en you press Ci_annel A or V, your TV will stop only on the c!_annels stored in the TV's channel memory.
Adding and erasing channels manually Afrer you have programmed the d_annels a_ttomatically, you can manually add or erase specific channels. To add or erase chamlels: TV front panel 1. Select the chamlel you want to add or erase, lf'you are adding a cha*mel, you must select tile cham_el using the Cham_el Number buttons. 2. Press MENU, and then press @ or J_ until the SET U'P menu appears. 3. Press a_ or V to highlight ADD/ERASE, and then press ENTER to display the pull-down menu.
Adjusting the comor convergence This projection TV uses three separate TV tubes: red, greem and blue. TLe red, green, and blue images are proiected onto tile screen wt_ere they converge ro form a full-color picture. You can see a clear picture only when the three images converge correct!> Convergence may drif't over time or if you move the T\L if you can see clear images on your TV screen, skip this procedure.
6. Press A (up), V (down), _ (left), or _ (righQ o_ die remote control to converge d_e red or blue line into the green line. + +'t' ++ ÷ $ ++ $ $$ + + ÷ + ÷ + + + + + ÷ + + + + + + + ÷ + + + + + COLOR AE;JHSTMKNT + + + + + + + + + + + + KNTfflR EXIT + ÷ : TO :TO OHAN( FINISH + + ff MENU AT4 + + + + + + + + + + + + + + + + ÷ + + @ ÷ + + ÷ ÷ EXIT ÷ @ ENTER + + ÷ ÷ EXI + : TO : TO [.b: TO ÷ ADJU-_T CHANGE OOLOR F_IqlSH _D.
Using the TWs features Adjusting Switching the channem settings between two channels using Channel Return The Channel Return feature allows you to switch between avo channels without entering an actual channel number each time. 1. Select the first channel (or video mode) you want to view. 2. Select a second channel using the Channel Number buttons (0-9, 100). Number 3. Press CH RTN.
3. Pres._;ENTER to display the FAVORITE CH memo. CH ]INPUT will be highlighted. _OtOS: ° Tile FAV T& bul?ons operal_ as MENU _ _ bu_l_/_5 wt_en a me,*_d is o/> scr_eR * Tile favorite channel feature is notava_i'ah/e FAVOR CLEAR I TE CN in ANT2 fflodJe ALL _NU SELECT _{ NiT:SET 4. Press the Channel Number buttons to enter one of your fi-_vorite c_lann els. 5. Press ENTER. 6. Repeat steps 4 and 5 lbr other channels. To select your f_worite channels: Press FAV V or A.
Labeling channels Channel labels appear above the on-screen &annel number display each time you tmn on the TV, change a channel, or press RECALL. You can choose any four characters to identi@ a channel. To create channel labels: 1. Press MENU, and then press _ or _ until the CUSTOM appears. RECALL mesm Number 2. Press A or V to highlight CH LABELING. 3. Press ENTER to display the CH LABELING metal CH INPUT will be highlighted.
Viewing the wide-screen picture formats t[480i and 480p s{gna{sonmy) You can view 4801 and 480p t'ormat programs 1,1a variety of picture sizes--Nac_ral, TLea_er _,_fide1, TLea_er \'qi& 2, TLea_er Wide 3, and FcdL Nc_mber Tl_e way tl_e image displays in any o( tLe picture sizes will vary depending on the lormat of"the program you are viewing. Selec_ the pictctre size tllat displays tlle current program tl_e way that looks best to yot£ See "Notice of possibIe adverse e_ects oft TV picture tube," &D,w right.
Theater Wide I picture size _otoJ * The picture is non-unifbrmlv enhrged--the center of rhe picture remains close to its original proportion, but the left and right edges are stretched widei to fill the screen. A small part of the picture at the top and bottom iS hidden; however, this mode cannot be scrolled.
ScrolJing the Theater W_de piclture (Theater Wide 2 and 3 onJy) 1, Press PIC S_ZE to select the Theater -Wide 2 or 3 mode, 2, Press MENU, and then press _ or !_ until PICTURE appears, menu 3. Press A or V to highlight P_CTURE SCROLL, * _T AUTO @ O@ p F OTURE _ -- PIC SIZE -- MENU -- AT_ -- ENTER 4. Press ENTER to display the Scroll Adi_tstment mode.
Using the AUTO ASPECT feature (480i signals only) When the AUTO ASPECT feature is se{-to ON and the TV receives a 480i signal, the picture size is automatically selected (as described in the fbllowing table). 4:3 Nolmal Natural 16:9 FuII 4:3 Letterbox FuII Theater wide 2 Not defined (llo ID-1 data) Usel-set mode Note: The AUTO ASPECT feature is not avaHab/e when viewing antenna (cable) or HDM/ input sources if"the signal does not include aspect inf'ormation, the picture size you .
Using the POP double-window )Vote." feature o TheSPL/Tbultonson/he fe,meZe oontm/ The POP (picture-out-picture) feature splits tile screen into a double window that allows you to watch woo programs at the same time, The POP prog!'am can come from a TV broadcast or an external sod.roe, such as a VCR. To display a TV broadca._t in 41e POP window: 1. Press SPLIT to display the POP window.
Switching the main and POP pictures Press SWAP wt_ile you are using the POP feature to switch the main and POP pictures. 1 Switching the speaker sound of main and POP programs Press _ or _ while you are using the POP f'eature to switch the so_tnd (main or POP) f?om the speakers. TLe selected input source indicator is displayed in purple. Example: Example: Press 4 PO_ DIREOTCH MUTE _Lg_p Press _.
POP douMe-wJndow aspect ratio The POP double-window f'eatttre displays each picture according to its input signal aspect ratio, as illustrated below. Note: The AUTO ASP_-CT feal_re (p_ge ;¢4) d_)es not opeml_ mode, o Aspectmtio in POP double-window is the ratio ofwidlh lo height of lf_e picture. 4eoi @ ® @ -- Channel Number Using the programmed channel search function use tt?e programmed ctaannd searda fimction to quickJy scan cl-_annelsyou programmed into tb_eTV's r_temory (page 24). 1.
Using the favorite channel search function You can use tLe f'avorite cLannel search function to quickly scan your f'avorite cLannels (see ' Programming your f'avorite cLannels" on page 1. Press FAVORITE. TLe TV automatically enters POP mode, and begins a twelvepicture scan of your f2_voritecLannels in tLe POP window. (Press FAVORITE again to return to a normal picture.) Moving Q ® ® picture purple ENTER 2.
Using the LOCKS menu The LOCKS menu inckuJes the V-Chip, CH Lock, Video Lock_ and New PIN Code fimcdons. You can use these f:_mcdons after entering _he correct PIN code. Note; The V-Ch/io &nc.tion is ava&b/e on/;/for the tZS V-Ch@ system 27e Canadian I/C('hip sysl_/7?is
ENABZE BE.OCKuNG LOCKS menu 1. From the LOCKS memo, press _ or & to highligllt V-CHIP, and then press ENTER. The V-CHIP menu appears. LOCKS ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: ........................................................................................ 2. Press V or A to hig!_ligbt ENABLE BLOCKING, :::::E N_ B_E and then press ENTER.
MPAA RATING (independent rating system 1. From the ILCHIP menu, press V or A to highlight MPAA RATIN& and then press ENTER, MPAA RATING mem_ appears. 2. Press A or _1'to highlight MPAA RATING, ii for movies) ILCHIP men u V-CHIP 3. Press ! i to lock ("X") or press 4! to unlock (%/"). ..............
UnMcking programs temporarily 1. If'you try to watch a TV program that exceeds the rating limits you set, TV starts the IV enters the auto program f_worite lock mode, channel search Af}ei ftmction 4 seconds_ (see page the 38). _)u can either unlock the program temporarily (see steps 2-4) or select a non-locked program to watch. After 4 seconds THIS PR<_¢RAM T_PG • EXCEEDS HASBEEN BLOCKED_ V SET •l <> M _T9 CABLE 9 2. To temporarily unlock the program, press MUTE. 3.
Tounlockindividual channds: 1. FromtheLOCKS menu, press A or T to highlight CH LOCK, then press ENTER. CH LOCK appears. mentt 2. Press AT@ _ to highlight the channel you want to unlock, then press ENTER. cH LOOK Ak_ _U @=SELECT g*_'F_N:<;L EAR 3. Repeat step "2fbr other channels. ']2_unlock a[[ locked chatme[s at once: Press A or T to l_igh%ht CLEAR ALL, and tllen press ENTER.
Locking video inputs With the VIDEO LOCK feature, you can lock out the input sources (Vide() 1, Video 2, \ride() 3, ColorStream HD 1, ColorStream HD2, HDMI) and channels 3 and 4. You will not be able to select the input somces with the TV/VIDEO button or Cl_annel buttons unless you clear the setting. To set up the vide() lock: 1. From the LOCKS menu, press A or V to lflghlight VIDEO LOCK, then press ENTER. 2.
Adjusting Selecting the picture the picture mode Note; You can select your desired picture wpe f?om fbur picture modes: Sports, Standard, Movie, and Preference.
Saving new preference You can save the PICTURE qualities (contrast, [}rightness, color, tint, sharpness and color temperat_tre) you adj_tsted in the picture preference mode. To save your new preferences: 1. Press MENU, and then press *q or _ until the PICTURE menu appears. 2. Press A or V to highlight PICTURE SETTINGS, and then press ENTER. PICTURE SETTINGS menu appears. 3. Press A_'@ _ to highligtat SAVE, and then press ENTER. When complete, SAVE changes to '_DONE".
Selecting the Scan Velocity Modulation {SVM_ The SVM _earure enhances picture contrast and sharpness. This feature has three modes: HIGH, LOW, and OFE Note: To select the SVM f_eature: h_qh quallty vide_omaledaL If you am 1. Press MENU, and allen press _ or _ until tl_e PICTURE menu appears. 2. Press A or V to highlight PICTURE SETTINGS, ENTER.
Resettingpicture adjustments The RESET fimction adjusts the picture qualities to the fbllowhg f'actory settings: Mode ........................... sports Sharpness ............. center (50) Contrast ................ max (100) Color temperature ........... cool SVM .............................. high CableClear DNR ........... auto Brightness ............ center (50) Color ................... center (50) Tint .......................
Selecting the video input source Press d_e TV/VIDEO on the remote control or the TI7 ro vbw a signal from another device connected to y)ur TV, such as a VCR or DVD player (see ilk_strarions bdow). _im can select ANT 1, VIDEO l, VIDEO 2, VIDE(_) 3, ColorStream HD1, ColorStream HD2, HDMI, or ANT 2 depending on which input }acksare used f_r connecting the devices (see _Connec@g your TV" on page 8).
Using the closed caption feature The closed caption feature has two options: * Captions_An on-screen display of"the dialogue, narration, and sound effects of'TV programs and videos that are closed captioned (usually marked as "CC" in TV listings). * Text_An on-screen display ofinfbrmation not related to the current program, such as weather or stock data (when provided by individual stations). To view captions or text: 1. "lithe the TV to the desired program. 2.
Setting the ii ON-timer To set tSe ON
Setting To set the the clock clock: 1. Press MENU, and then press @ or _ until the SET UP menu appears. 2. Press A or _' to highlight CLOCK SET, and then press ENTER. 3. Press die Number buttons (0-9) to enter the correct time. The clock operates on a 24d_our cycle. 4. Press ENTER to start the clock. _)ET Note : /f the TV_ power soume is intemlplec] occurs), the dock must be fsseL UP ANT 1 / 2 TV / CABLE CH pR< >G RAIVl ADD / ERASE MENU To display the time on-screen: Press RECALL.
Adjusting Muting the sound the sound Press MUTE to temporarily reduce (1/2 MUTE) or turn off (MUTE) she sound. Wl:ile the sound is of}_the screen will display _112 MUTE" or '_MUTE" in the lower right corner. Every time you press the btttton, the mute mode will change in the following order. --RECALL [---_Normal --> 1/2 MUTE --> MUTE --] © When you select '_MUTE" mode, the closed caption _eature is automatically activated. To deactivate this feature, deactivate MUTE.
Using the WO_V _ surround sound feature WOW is the latest audio enhancement technology combined with SRS 3D and TruBass of SRS Labs individual technologies. The feature uses stereo signals f_om a TV broadcast or video inpuL NOg@f If the broadcast/s rnonaula/, the SRS 3D effect does not wofl<, To adiust the WOW feature: 1. Select STEREO mode (See' Selecting stereo/SAP broadcasts" on page 53). 2. Press MENU, and then press @ or _ until the AUDIO mem_ appears. 3.
Resettingyour audio adjustments The RESET function returns the audio ad)ustments to the following fhctory settings: Bass .................. center (50) Treble ............... centd (50) Balance ............ centd (0) To reset the audio adjustments: 1. Press MENU, and then press @ or _ until the AUDIO appears. 2. Press A or V to _ighlight AUDIO SETTINGS, ENTER. AUDIO SETTINGS menu appears. menu @ ®@ and then press MENU 3. Press A or V to higldight RESET, and then press ENTER.
Turning off the buiJt-in Use thisfeature audio system To turn to turn the TV speakers (See '_Connecdng of_" the built-in , and then press ENTER. speakers an audio off'when systen? you connect _ on page an 16). speakers: 1. Press MENU, then press @ or _ until AUDIO Note: M_,kesure the volume conlfb/ of youf audk_ amp//tier/s set to a moderate//stenit_glevel menu appears. 2. Press A or Y to iflghlight SPEAKERS, and then press ENTER. 3. Press A or V to select OFE and then press ENTER.
Selecting the background of the menu display _¢_ucm cllange t_e background of t_e meim display by selecting from two preset types: shaded and solid (gray). To select --RECALL the background: 1. Press MENU, a_]d the11press _ or _ _mtil d_e CUSTOM appears. 2. Press A or RI' to higil[igb£ BACKGROUND, ENTER. memt and then press 3. Press A or T to select either a SHADED or SOLID background, aI*d the*_press ENTER.
Televiskm System NTSC standard Dimensions 46H84: Channel Coverage VHF: 2 ttwough 13 UHF: 14 through 69 Cable TV: Mid band (A-8 through A-l, A through I) Super band (l through W) Hyper band (AA through ZZ, AAA, BBB) Ultra band (65 through 94, 100 through 125) Power Source 120 V At_;, 60 Hz 51H84: 57H84: Widtt_ Heigt_t Depth Widtt_ Height Depth Width Height Depth xx-x/x inches (xxx ram) xx-x/x inches (xxx ram) xx-x/x inches (xxx ram) 47-3/5 inches (1,209 ram) 50-2/5 inches (1,280 ram) 22 inches (570 mm)
Troubleshooting Before SOI_le calling a service technician, please check the f_dlowh_g table f_r a possible cause of the symptom and SOlHtions_ Symptom TV will not turn on So_t_tion No picture, * Check the antenna/cable r:to sound , Make sure the power cord is plugged in, then press POWER. * The remote control batteries may be dead. Replace the batteries. connections. No sound, picture OK * The sound may be muted. Press VOLUME.
Limited United States Warranty' for 27" FST PURE _ and All Larger Television ]bshiba Amelica Consumer Rod(Jets. L.LC. ("TACP') makes the folbwing ]infited wananties to original consurnels in the United States, THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS TELEVISION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE, PRODUCTS PURCHASED IN THE U.S.A. AND USED IN CANADA ARE NOT COVERED BY THESE WARRANTIES.
Tushiba ofCanada Limited C"TCL'] makes thet'ollowing limited wananties toodginal consumers in Canada. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL COBISUMER PURCHASER OR ANY PERSON RECEIVING THIS TELEVISION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE. PRODUCTS PURCHASED 1N THE U,S,A, AND USED IN CANADA ARE NOT COVERED BY THESE WARRANTIES. PRODUCTS PURCHASED JN CANADA AND USED IN THE U.S.A. ARE NOT COVERED BY THESE WARRANTIES.
A Picture adjustments COLOR TEMPERATURE .............................................. 46 A/V cabbs (standard:) ......................................................... 8 Picture mode .................................................................... 45 ANT 1/2 ................................................................................... 23 Picture quality .................................................................. 45 Antenna cabbs (coaxia0 ..................................................
TOSHIBA AMERnCA PRODUCTS, CONSUMER HEAD OFFICE: 82 TOTOWA ROAD, WAYNE, NJ 07470, U.S.A. NATIONAL SERVICE DIVISION:1420-B TOSHIBA DRIVE, LEBANON, TN 37087, U.S.A. TOSNtBA LTD. OF CANADA L.LoC° HEAD OFFICE: 191 McNABB STREET, MARKHAM, ONTARIO, L3R 8H2, CANADA-TEL: (905} 470-5400 SERVICE CENTERS: TORONTO: 191 McNABB STREET, MARKHAM, ONTARIO L3R 8H2, CANADA -TEL: (905) 470- 5400 MONTREAL: 180.50 TRANS CANADA, KIRKLAND, QUEBEC, H9J 4AI, CANADA - TEL: (.