Important Information Precautions WARNING Installing your TV TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. • Place the TV on tile floor or on a sturdy platfi_rm. "Pile mounting slirf_ce should be flat and stead),. If you install the TV on a soft floor, make sure that the floor is not damaged by the weight of the TV. WARNING • Models 43AX60 md 43AX60A may be used onl) with the Toshib _stand shown on page 50.
Introduction ................................................................ Welcome to Toshlba ......................................................... E ploring your new TV ................................................... 4 4 4 Using tile f_rorite fimction ..................................... 31 Using the strobe fimction ........................................ 31 Using the I£)CKS Entering Connecting your IV ..................................................
Introduction Welcome to Toshiba Congratulations! You have purchased one of the finest projection TVs on the market. The goal of this manual is to guide you through setting tip and operating your Toshiba TV as quickly as possible. This manual applies to models 43AX60, 43AX60A, 50AX60, and 50AX60A. Before you start reading, check vour model number by looking at the rear of the TV.
Connecting your TV ANI_NNA If you haven't connected electronic equipnlent before, or you have been frustrated in the past, you may wish to read this section. (Cables are not supplied.) AUDIO Cables • A coaxial cable is the standard cable that comes in flom }_ur antenna or cable converter box. Coaxial cables use "F" VIDEO Cable connectors, ÷ • Audio and video cables are usually color coded according to use: yellow for video and red and white for audio.
Connecting a cable converter box This connection allows you to watch cable and premium channels. You should keep your TV selected to ANTI so that you can tlse the TV features. When viewing premium channels, select ANT-2 and tune the TV to channel 3 or 4 (wbiches'er channel is ,_acant in your area), then use the converter box to change channels. You will need two coaxial cables.
Connecting a DVD/satellite receiver and a VCR This connection allows you to watch DVD/satellite, video and TV programs. You can record one TV channel while watching another channel.
Stereo VCR From Antenna TV Caution: Toplay from the DVD, the DVD and TVmust use ColorStream connectionsand the TV must be set to ColorSti_am mode (seepage 40) Tor_cord fmm the DVD, the VCRmust select Line IN The unauthorizedrecording of television programs, video tapes and othel materTa/s may infringe upon the provisions of copyright bws DVD PlayerWith ColorStream÷ Connecting two VCRs This connection allows you to record (dub/edit) from one VCR to another VCR while watching a video program.
Connecting This connection carncord a camcorder allows you to watch video materials recorded on a eF, You will need: • one pair of audio cables • one video cable CaeUoe: ff you are using an S VI-/Scamcorder witb an S video outpu{ connect this to the Svideo input on tbe TVand remove the video cable Do not connect the video cable and the S video cable to Video 3 simultaneously Connecting an audio system This connection allows you to use an audio amplifier to adiust the audio level.
Connecting an A/V receiver If you use a system that delivers Dolby Pro Logic* surround sound, you will probably want to use tbe TV speakers as center channel speakers. A center channel speaker adds to tbe realism of a surround sound system sttch as Dolby Pro Logic.
Using the remote control Preparing the remote control for use Yotu" Toshiba remote control has one dedicated TV mode and 5 universal modes: VCR, Cable/SAT, DVD, Audio 1, and Audio2.
Remote Control functional key chart llhmllnates the remote Sleep timer Power -....................
............... {{ {{ VCR_ VCR _ g Disc shift AM/FM Disc shift Deck side A/Bswitch Stop ......
Programming the remote control for use with your audio/video devices Device code setup 1. Refer to the Device code table on pages 16-19 to find the number that corresponds to the brand name of your device. POWER If more than one number is listed, try each one separately until you find tbe one that works. Number 2. Press MODE until tbe Mode indicator of the device (CABLE/ SAT, VCR, DVD, AUDIO 1, AUDIO2) lights up. MODE 3.
Verifying the device code {990) Use this feature to yetiS, the codes for your other devices. The number of blinks after pressing the 1,2, 3, and 4 buttons is the 4 digit code set up for that mode. Example: To veri_ the VCR code is 0385: 1. Press MODE to select the VCR mode. @@1 Number "-- NODE 2. While holding down the RECALL button, press 9, 9, 0 in sequence. 3. Press 1 _ 0 blinks. 4. Press 2 _ 3 blinks. 5. Press 3 _ 8 blinks. 6. Press 4 _ 5 blinks.
Device code table Cable box setup Brand name AB( Code number O020, 0022, 0026, 0027, 0030, 0032, 0033, 00_6 Allegro Anmlcast Antromx Aicber BBT Belcor Bell & Howdl Bell Soudl Cable Sml Cabbtemla Cablevlm_ 0172, 0334 0918 0041, 0226 0041, 0172, (1226, (1816 0286 0075 0033 0918 0075 (1041 0041 Century Cidzcn Co]ore Voice Comtronlcs ( ont_c Digl E _stem Eme=son 0172 0172, 0334 0(144, (1050 (1059 0038 0656 0021 0816 E. elqtaest Focus CC Elecnonlcs Ga.ald Gcml.
Device code table VCR setup codes Brand name Code number AdmJlal Adw'n mla Aiko 0067, 0228 111119 0297 Aiwa Akal (11119,0056 0060, 0072, America Action American Asha AtMiovox BeaumaJk High Ball & HowdI Bwksonlc CCE 0(191, 0297 Calls 0056 Carton 0054 Capch;ut Carver Cinm'al 003q (1100 0297 (- idz_n Colt 0056, 0297 0091 Galg 0056, 0066, 0259, 0290 0054, 0060, 0181 Mathes Kodak 0054, 0056 iX1 0056 0019, (}227 0091 lloyd's Logik MEI M(A 0054 (1259 (1056 0259 0228, 0314, 0498 Curds
Device code table DVD setup codes CD Player codes Code number 0660 0509, 0653 11541 0601 JVC Ke._ood 0577, 0642 0553 Brand name AD( Adcom Aiwa Akal Audlo Alchemy Audlo--l\'ch nica Magnavox Maiantz Mitsublshl Onkyo Optlmus Panasonk Philips Pioneer Proscan RCA 0522 0558 0540 0522, 0590 0509, 0522, 0544, (1541 0541 BSR 0213, 0264 Btirmestel 0439 Callfomla Audio Labs 0048, 0322 ( aneJa 0213 Carver 0176, 0198, 0318, 0456 DAK O264 DKK 0019 Denon 0022, (1892 Emelson 0174, 0183, (1324, Samsung Sharp Sherw
Device code table Amplifier Code number Aiwa 0425 (_ _ver (ui6s Mathes 0288 0319 Denon GE H umm/Kardon 0179 0097 0911 WC Linn 0350 0288 Magn wo-_ Mamn_ 0288 0288 ()pd mus PaiHsonk 0_19, 0414 0327 Philips PioneeJ Realistic 0288, 0911 0032, 0319 0414 Sony 0239, 0708 Soundcslgn Dchni{s ]_Mfiba 0097 0327 0372 Vicro_ WaRts 0350 0032, 0097 Yamdm 0373 Cassette Misc.
Learning Only here, about the remote control tbe buttons that are used to operate the TV set are described POWERturns the TV on or off" SLEEP sets the WV to turn off at a specific time (page 42) LIGHTTbe initial press of the LIGHT button causes two actions: 1) enables the illumination mode 2) illuminates the keypad. Subsequent presses oftbe LIGHT button cause the llluminavion mode to toggle between enabled and disabled. Any keypress illuminates the keypad for 5 seconds.
Setting up your TV Learning 43AX60 and 43AX60A about the menu system After you have installed the batteries and programmed the remote control, >_u will need to set some preferences oi1 the TV using the menu. You can access the ment] with the buttons on your TV or by using the remote control. 1. Press MENU to display menu. 2. Press _ or _ to select menu. MENU • IbVA 50AX60and 50AX60A \ 3. Press • or • to select an item. 4. Press _ or _ to select or adjust a setting.
Changing the on-screen display language 43AX60 and 43AX60A You can choose fiom three different languages (English, French and Spanish) for the on-screen displays. Adjustment menus and messages will appear in the language of your choice. To select a language: 1. Press MENU, then press _ or I_ until the SET UP mentl appears. MENU • II_VA 2. Press • or • to highlight LANGUAGE. 50AX60 _SET and 50AX60A UP ANTI/2 TViCABLE CN PROGRAM ADD/ERASE ANTI CABLE ADD MENU AV•Ib 3.
Adding channels to the TV's memory Your TV will stop on specific channels that are stored in the TV's cbannel memory when you press Channel • or •. Use the steps below to set all active channels in your area automatically. Programming channels automatically Your TV can automatically detect all active channels and store them in its memor?c After the TV has stored the channels in its memory, you can erase channels or add }_ur favorite channels.
Adding and erasing channels After you\'e channels. manually 43AX60 and 43AX60A the channds, VOUcan add o1 erase specific plogramnled To add or erase channels: l. the channel you want to add or erase using Channel • or • . If adding channels, VOtltiltlst select the channel to add by using the Channel Number buttons. Select 2. Press MENU, then press _ or 1_ until the SET UP menu appears. 3. Press • or • to highlight ADD/ERASE. _SET • IbTA Channel V& 50AX60and 50AX60A \ UP LANGUAGE CLOCK SET ANT%'
To check and adjust the color convergence: 1. Press MENU, then press "_ or I_ until the PICTURE menu appears. 2. Press • or • to highlight CONVER(;ENCE. MOOE FLESH N©ESE COLOR SPORTS TONE REDUCTION ON OFF 3. Press _ o1"I_ to display the center CONVERGENCE menu. + _BLUE ENTER;TO E×_T ;TO SELECT SELECT C©L©R POS_T_ON If you see separate colored lines, ?_u have to adjust the convergence. 4. Press ENTER to highlight RE[) or BLUE. 5.
Using the TV's features Adjusting the channel settings Switching between two channels You can switch between two charmels without entering an actual channel number each time. _i_ i; ........ i?_<){i? ¸¸¸¸G_II _ ¸7¸¸¸ .... To switch between two channels: --Channel Number 1. Select the first channel vou want to view. 2. Select a second channel with the Channel Number buttons (0-9, 100). 3. Press CH RTN. The previous channel will be displayed.
To clear your l:avorite channels: 1. Press MENU, then press "_or I_ until the CUSTOM menu appears. 2. Press • or • to highlight FAVORITE CH2 for example. 3. Press "_or I_ to display the FAVORITE CH2 metro. T_MER CG OFF 0 BACKGROUND CLEAR 0TV 0 CAB[_ 4. Press • or • to highlight CLEAR, then press 1_ or _ until "0" replaces the channel numbers you have programmed.
6. A_sign the label to the channel. Press _ or I_ to enter a character in the first space. Press tile button repeatedly until the character you want appears on the screen, then press ENTER. :a a ; T_MER CC FAVORETE OgF CNI P 7. Repeat step 6 to enter the rest of the characters. If you would like a blank space in the label name, you must choose an empty space tCromthe list of characters. Otherwise, a dash "-" will appear in that space. 8. Repeat steps 4 through 6 for other channels.
Watching picture-in-picture (PIP) The picturedn-picture (PIP) feature allows you to watch two pictures at the same time. Tbe smaller picture can be a TV broadcast or come l°rom an external source, sucb as a VCR. To display a TV broadcast as a small picture: 1. Turn on the TV and select the program you want to watch. 2. Press PiP once to display a small picture. A window 1/9 the size of the screen will appear. Press PIP a second time to display a 1/ 16 size window. 3.
Switching the main and small pictures Press SWAP while )_u are using the PIP feature to switch the main and small pictures. The main and small pictures will switch each time you press the SWAP button. Changing the position of the small picture Press LOCATE repeatedly while )_u are watching a small picture. The display position of the small picture will change in the following order: LOCATE SWAP Freezing the small picture Press STILL while )_u are watching a small picture.
Using the preview function Press INFO to scan the channels programmed in the TV memory by the CH PROGRAM function. The 6 picture multi-search will start. -- FAVORITE -- ENTER To cancel the preview function: Press INFO again. Using the favorite function 1. Press FAVORITE to scan the channels programmed in the TV memory by the l:avorite channel function (page 26). The 9 picture multi-search will start. The first window will be displayed with a moving picture.
Using the LOCKS menu The LOCKS menu includes the V-CHIR CH Lock, Video Lock and New PIN Code f\mctions. You can use these functions after entering the correct PIN code. Entering the PIN code 1. Press MENU, then press "_ o1"I_ until tile LOCKS menu appears. V CH_P ENABLE BL©CK_NG TV RATING MPAA RATING BL©CKENG ©PTION CH LOCK V_OE© LOCK NEW pIN CODE ©gg OFF 2. Press • or • to display the PIN code entering mode.
Using the V-CHIP menu Some TV programs and movies include signals tMt classify the content of the program (violence, sex, dialog, language). The VCHIP control feature in this TV detects the signals and blocks the programs according to your selections. To use this feature, perform the following setup. LOCKS menu _ LOCKS ENABLE BLOCKING OPTION CHBLOCKING _OCK V_OEO LOCK NEW p_N CODE 1. From the LOCKS menu, select ENABLE BLOCKING. V_DEO 2.
MPAA RATING ([Independent rating system for movies) LOCKS menu 1. From tbe LOCKS nlenu, select MPAA RATING. 2. Press _ or I_ to display the MPAA RATING or • to higblight MPAA RATING. menu, then press • _LOOKS 3. Press _ or 1_ to display the MPAA RATING menu. V CH_P ENABLE BLOCKING V_DEO LOCK NkncV pIN OODE ON OFF To select each item: Press•or•. 4. Press I_ to lock ("X") or press _ to unlock ("¢'").
Unlocking programs temporarily 1. If you try"to watch a TV program that exceeds the rating limits you set the TV *viii enter into the program lock mode. TN_S pROGRAM HAS TV-PG L V E×CEEDS SET L_M_TS PUSH MUTE TO BEEN ENTER BLOCKEO! P_N CABLE 4 2. If you want to watch the locked program temporarily, press M[JTE. 3. Press the Number button (0-9) to enter the 4-digit code you have stored. BLOCKING ENTER TO 0 ACTIVE P_N COOE TEMPORARELY 9:TO SELECT Ut,LBLOCK ENTER:TO SET 4.
To unlock channels: 1. From the LOCKS menu, select CH LOCK. 2. Press "_ or 1_"to display the CH LOCK menu. 3. Press • or • to highlight CLEAR. 4. Press "_ or I_"until "0" replaces the channel numbers you have locked.
Adjusting the picture 43AX60 and 43AX60A Selecting the picture mode You cam select your desired picture type from four preset picture modes: sports, standard, movie, and preference. To select the picture mode: 1. Press MENU, then press "_ or I_ until the PICTURE menu appears. 2. Press • or • to select MODE. 3. Press "_ or I_ to highlight the mode you want. MENU 50AX60 \ • I_vA and 50AX60A MENU AV•Ib TENT SHARPNESS RESET SAVE NEW 5_ PREgERENCE The table below describes tile effects of the different
Saving new preference You can save the PICTURE items (contrast, hrightness, color, tint, and sharpness) you have adjusted in the picture preference mode. To save new preference: 1. Press MENU, then press _ or 1_ until the PICTURE menu appears. 2. Press • or • to highlight SAVE NEW PREFERENCE. 3. Press _ or 1_. MODE PREFERENCE FLESH T©NE NO_gE R£DUCTION COLOR TEMPERATUR£ OFF OFF MEOIUM You can choose preset options by selecting the PREFERENCE in the picture mode feature. See page 37.
Selecting the color temperature You can change the qual[_" of" the picture preset color temperatures: cool, medium, by selecting and warm. from three To select the color temperature: l. Press MENU, then press _ or I1_until the PICTURE menu appears. 2. Press • or • to highlight COLOR 3. Press _ or 1_ to highlight MODE FLESH Resetting TEMPERATURE. the mode you want. pREFERENCE TONE ON your picture adjustments 1. Press MENU, then press < or I_ until the PICTURE menu appears. 2.
Watching video input You can use the INPUT button on the remote or the TV/VIDEO button on the TV m view a signal coming fiom other devices, such as VCRs or video disc plavers that may be connected to your T_L Sdect VIDEO 1, VIDEO 2, VIDE() 3, or ColorSneam depending on which input jacks are used for connecting the devices. (See "Connecting your TV" on page 5.
6. Finish labeling the other video sources as desired. To return to the previous merm, press • or • to highlight CUSTOM MENU, then press _ or 11_. To exit the menu, press EXIT. Using the closed caption feature 5_u have two options with the closed caption feature: captions or text. A caption is a printed version of the dialogue, narration and/or sound effects oLraTV program. Text is information not related to the program that appears on half of the TV screen (if"available in your area).
Setting the sleep timer You can set the TV so it turns of}'automaticall}_ Note : To set the sleep timer: The timel can also be set by using the MENU and AV< I_ buttons 1. Press SLEEP to display the CUSTOM highlighted. menu. TIMER will be 2. Press two Number buttons (0-9) to enter how long )_u want the TV to remain on (up to three hours, in 10 minute increments). Enter the numbers after the number position starts to blink.
Adjusting the sound Muting the sound Press MUTE to temporarily turn offthe sound. While the sound is off; the screen will display the word MUTE in the lower right-hand corner. To restore the sound, press MUTE again. When you press the MUTE button, you automatically activate the closed caption feature. To deactiv:tte this feature, press the MUTE button again. This feature only works wllen the closed caption mode is set to off" See "Using the closed caption feature" on page 41 for more information.
Using the surround sound feature The surround sound feature expands tile audio listening f_eld wider and deeper to create exceptional sound quali_/from the mV's speakers. The feature uses stereo signals from a TV broadcast or video input. To turn on the surround sound feature: 1. Select the stereo mode following the steps under "Selecting stereo/SAP broadcasts" oil page 43. 2. Press MENU, then press < or _ until the THEATER appears. 3. Press • or • to highlight SURROUND. menu 4.
Adjusting the sound quality You can change the sound quality- of your TV bv adjusting the bass, treble, and balance. To adjust the sound quality: 1. Press MENU, then press _ or_ until the AUDIO menu appears. 2. Press • or • to higblight the item you want to adiust. iii_!i_!_ _AUD_O _i!!(_!i I ! !ii ii !i!i 3. Press _ orl_ to adjust the level. • _ makes the sound quali_ weaker or decreases the balance in the right channel, depending on the item selected.
Using the Sub-Bass System (SBS) The Sub-Bass System allows you to improve bass performance (even when the sound volume is low). To turn on the Sub-Bass System: 1. Press MENU, then press _ orl_ until the AUDIO menu appears. 2. Press • or • to highlight SBS. Note: TheSub Bass Systemsignal does not pass &_ough the "Variab/eAudio OUT'jacks (See page 2) Howevel; the AUDIO menu wi// appear when the buttons ai_ pressecZ 3. Press < or _ to highlight ON.
Selecting the Audio OUT sound This feature allows you to select the sound sources (MAIN and PIP) that are output from the Audio OUT jacks. This is useful when ampli_'ing or recording the PIP sound with external equipment while hearing the sound of"the main picture with the built in speakers. To select tile Audio OUT sound: 1. Press MENU, then press _ orb" until tile AUDIO menu appears. 2. Press • or • to highlight AUDIO OUT. 3. Press < or 1_ to select MAIN sound or PIP sound.
Selecting the background of the menu display You can change the background of"the menu display by selecting from two preset types: shaded and solid (gray). To select the background: 1. Press MENU, then press _ or 1_ until the CUSTOM appears. 2. Press • or • to highlight BACKGROUND. ment] _ _i;;414ili
Understanding the auto power off feature The TV will automatically turn itself offafter approximately 15 minutes if it is tuned to a wmant channel or to a station completes its broadcast for the day. This feature does not work in VIDEO mode. Understanding the last mode memory feature If the power is cut off while you are viewing the TV, the Last Mode Memory feature turns the TV on automatically when the power is resupplied.
Appendix Specifications Tdcvision SI'St_m Chamlel Coverage NTSC standard VHF: 2 through UHF: 14 through Cable TV: ]3 69 Mid band Super band Hyper (A-8 through (] through band (AA through Ultra band (65 through Podgier Sou A-l, A through ZZ, AAA, BBB) 94, 100 through 125) ] 20 V AC, 60 Hz roe Power Consumption 43AX60A: 143 W (average) 50AX60A: 141 W (average) A_Jdio Power 14W+ Speaker Type 4_AX60/A: Two 4-3/4 inches (12 cm) round 50AX60LA: Two 6-1/4 inches (16 cm) round Video/Audio
Troubleshooting Before calling a service technician, please check tbe following table for a possible cause of the problem and some solutions. Problem Solution TV will not turn on • Make sure the power cord is plumed in, then press POWER. • The remote control batteries may be dead. Replace the batteries. No picture, No sound, no sound picture OK • Check the antenna/cable connections. • The sound may be muted. Press VOLUME. • The station may have broadcast difficulties. Try another cbannel.
Limited United States Warranty ]_shiba America Consumer Pwducts, Inc. ("TACP') wa.andes c×tend to the odglnal consumel pmchasel pmchaser or nansfcree, md Toshiba Ha_all Inc. ("THF) make tile fi)llo_ing limited wanantles.
Index FLESH TONE .................................................................... 38 NOISE REDUCTION ...................................................... 38 Picture mode .................................................................... 37 A Picture quality .................................................................. 37 A/V receiver connection ................................................... l0 Picture in Picture (PIP) ANT 1/2 ...............................................................
TOSHIBA AMERICA CONSUMER HEAD OFFICE/82 TOTOWA ROAD, WAYNE, NEW JERSEY 07470 NATIONAL SERVICE DIVISION/1420B TOSHIBA DRIVE, LEBANON, TOSHIBA HAWAII, HEAD OFFICE/327 KAMAKEE TOSHIBA STREET, HONOLULU, OF PRODUCTS, INC. TN 37087 INC. HAWAII CANADA 96814, US+A+ TEL: (808) 591-8377 LTD.