[
Dear Customer, Thank you for purchashtg this Toshiba TV. This manual will help you use the many exciting features of your new TV. Before operating the TV, please read this manual completely, and keep it nearby for future reference.
installation, Care, arid Service mnstallation Follow these recommendations and precautions and heed all warnings when installing your TV: 5} Do not use this apparatus 16) Never modify this equipment. Changes or modifications may void: a} the warranty, and b) the user's authority to operate this equipment under the rules of the Federal Communications Commission. near water, 17) 6} Clean only with a dry cloth. iii//i_J_" _i_iiiii_ o 7} Do not block any ventmiatmon openings.
3o} [2Tis item applies to projection TVs onl}_] If the air temperature rises suddenly (for exampIe, when the TV is first delivered}, condensation may form on the lenses. This can make the picture appear distorted or the color appear faded. If this happens, turn off the TV for 6 to 7 hours to allow the condensation to evaporate. 24} Always operate this equipment from a 120 VAC, 60 Hz power source only.
Important Safety Information ............................. 2=4 introduction ......................................... \Velconrc _o7\_shiba .............................................. Explorh_g yore_new TV ................................................... Note regarding Connecting Quick Connect 6 6 6 Guide ........................ 6 your TV .................................................. 7 Conne_ti*g a VCR ............................................... 7 Connecting a cable box ........
Welcome to Toshiba Congratulation!! You have purchased one of"the finest TVs on the market. The goal of"this manual is to guide you through setdng up and operating your Toshiba TV as quickly as possible. Note regarding O,nick Connect Gnide This manual applies to modds 32HFX73 and 36HFX73. Befbre you start reading, check your model number by looking at the rear of"the TV. The Quick Instructions in this manual are based on using the remote control.
A ÷ Connecting L your TV Note: Cablesale not supplied wilh your TtZ 431D e Coaxial cable [s the cable that comes in from )_mr antenna, cable IV service, or cable converter box. (oaxinl cable uses "F" connectors. iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii Coaxial(anten,a} cable ® Staudard AJV (audlo/vldeo) cables usually come in sets of three, and are typically cdor-coded according to use: ydlow fbr vide(), red f_)r stere() right audio, aud white fi._rstereo lef'_ (ur munu) audio.
Connecting This connection a cabme box allows }_u to watch basic and premium To warcll basic cable and use the TV's fearures, premium channels_ (whichever channel change channels. You will need: cable channels. select ANT-1.
Connecting (without a DVD pJayer or satellite component video) receiver and a VCR This comlection allows y(m to watch DVD/.,;atellite> VCR_ and TV program._;_ chmmel. You will o two and record chamlel while watching another For ffTe h/:ghesl possible picture quality from a DVD p/ayer/satel/ite need: coaxial cables pair of audio one S-video receiver) cable (three A/V if'.
A ÷ L Connecting a DVD player with component video and a VCR This connection allows you to watch DVD, VCR, and TV programs, and record TV programs. Your TV has ColorStream c'_(component video) inputs. Connecting your TV to a DVD player with component video inputs (such as a Toshiba DVD player with ColorStream u_)can greatly enhance picture quality and realism. - To record one TV program while watching another TV program, tune the VCR to the channel to record, and tktl_lethe TV to the channel to watch.
A ÷ Connecting component a DTV receiver/set-top video and a VCR L box with TLis connection allows you to watd_ DTV (digital TV), VCR, and TV programs, and record DTV and TV programs. Your TV Las Cole)Stream (component vide<)) inputs. Connecting your TV to a DTV receiver witl_ component video inputs can greatly enhance picture quality and realism.
A ÷ Connecting two [ VCRs This connection ;dlows you to record (dub/edir) f'rom one VCR to another VCR while watching a videotape. You can also record from one TV ciaannel while watching another TV channel. You will need: * two coaxial cables * two sets of standard A/V cables VCR1 Note." From Antenna /f VCR 1 has S-video, you can use an S-video table/tTs/ead of standald virleo cable far better p/ctors peffoffr_ance.
A ÷ Connecting a device The DVI/HDCP _ input program in digital material on to the DVi/HDCP L input your TV is designed to accept HDCP form from HA/CEA-861-compliant 2 DVD player eq_tipped with a DV][-D digital single-link output connection.
A ÷ Connecting an audio L system Amplifier TLis connection allows you to use external speakers wkh an external attdio amplif;er to adiust tt_e sound level. To control the audio, turn on the TV and the stere() amplifier, and turn off t_e built-in speakers (see {T[trning of_"the built-in speakers" on page 56).
A ÷ Using the remote Preparing the remote L controJ controJ for use Note: Your TosSiba TV remote control 5as one dedicated TV mode and five universal modes: VCR, Cable/S_g, DVD, Audio 1, and Audio2.
A ÷ Control Remote functional [ key chart = iLights the remote ks)', md toggles beLweenenabDd md disabDd Ilhm_inadon mode Pi( ; Sleep thner power _ --- Digit i PovJe_" P{3VJeE Powe__ Po%ve[ POVJeE P{3VJeE Digit i Digit 1 Digit 1 Digit 1 AV input 1 Digit I Digit I Digit 2 Digit 2 Digit 2 Digit 2 Digit 2 AV input 2 Digit 2 Digit 2 Digit 3 Digit 3 Digit 3 Digit 3 Digit 3 AV input 3 Digit 3 Digit 3 Digit 4 Digit 4 Digit 4 Digit 4 Digit 4 Digit 4 Digit 4 Digit 5
A ÷ VCR_ -- T\,_S/.
Programming the remote controJ for use with your audio/video devices Device code setup 1. Refer to the Device code table on pages 20-21 to find the code f'or tlle brand of your device. If more tiaan one mmlber is listed, try each one separately until you find the one that works. 2. Press MODE until tlae Mode indicator of the device ((;ABLE/ SAT, VCR, DVD, AUDIO 1, AUDIO2) lights _tp. 3.
A ÷ Using the volume IoeR feature [ {8000) For the TV, CABLE/SAT, VCR, and DVD modes, the volume controls (VOL AV and MUTE) can be programmed (locked) to the selected device mode. This feature does not apply to the AUDIO1/2 i_lod es, For example, to lock the volume controls to always jump to tile CABLE/SAT mode: 1. Repeatedly press MODE to select tile CABLE/SAT mode. 2. While holding down the RECALL button, press 8 -0 -0 -0. 3. Press VOL A. The Mode indicator will blink two times (locked).
A ÷ Device code table VCR setup Brand ADMIR/\L Cable box setup cedes Brand Code codes Code 0135 0127 0132, 0181 AKAI 0129,0114,0115, 0116 AUDIO DYNAMIC 0139, 0111 BELL&HI)WELL 0105, O113 BROKSONIC 012(i, (1126, 018(i CANON 0123 0125 CCE 0143 CITIZEN 0106 C'RAIG 0105, (1129, 01(16 CURTIS MATHES 0145 0124, 0127 DAEWOO 0143, 0101,111124, 0175 DBX 0139, 0110,111111 DIMENSIA 0145 EMERSON 0143, (1126, 0119, 01(13, 0125, 0142, 0120, 0118 FISHER 0105, 0108, 01(19, 01(17, 011}, 0165 FU N A[ 0127, 0126, 012(i,
A ÷ Device L code tabJe CD Player setup Brand ADMIRAL AIWA CARVER DENON EMERSON FISHER G ARRARD HARMAN KARDON HITACHI ]ENSEN ]VC K EN',X/OOD LXI MA(;NAVOX MARANTZ MCINTOSH NAKAMICHI ONKYO OPTIMUS PAN AS<)N IC PHILIPS PR)NEER QUASAR RCA SANSUI SANYO SCOTT SHARP SHERWOOD SONY SOU NDE-S[GH TEAC TECHN ICS VICTOR YAMAHA Receiver Bvand ADMIRAL A(WA DENON setup codes Code 6126 6133, 6135 6129 6142, 6151 61 39 6105, 61(>6 6117 612{/, 6121, 6123,6119 6107 6134 614(/, 6141 6145, 6148,6151 6100, 61(11, 6111,
Leamin 9 about the remote control The buttons used fbr operating the TV only are described here, For a complete Control list of the remote f'unctional key chart control's _ oi_ functions, pages see the "Remote 16 -17. POWERturns the TV on and of`f" SLEEPsets the TV m turn of'f"at a specific dine (page 50) tIGHTThe fkst press of"the LIGHT button lights the keypad and turns on die Illumination mode.
A ÷ Setting L up your TV Learning about the menu system Af'rer you llave installed ti_e batteiies and programmed the remote control, you will need to set some preferences on the TV using the menu system. You can access the menu system ttsing the Dttttol_ls o1_1 your TV or remote control. 1. Press MENU to display the mentt system. 2. Press _ or 1_ to select a men_t.
Using the Quick Connect Guide The Quick Connect Guide atttomatically starts the first time the TV is turned om This feature provides on-screen instructions to guide you through initial setup ofyour TV. To manually start the Quick Connect Guide and cllange the current settings: 1. Press MENU, and then press @ or _ until tiae SET UP menu appears. 2. Press A or _' to laighlight "QUICK CONNECT GUIDE.
Semecting the antenna input You can connect to two dif_'erent antenna input sources (ANT 1 or ANT 2). TV front panel To select tile antenna input using tLe menu system: 1. Press MENU, and then press @ or _ to Lighlight tile SET UP f_lei1u. 2. Press A or T to Lighlight ANT 112. TVNIDEO SET UP LANGUAGE ENGL ADD/ERASE TILT QUICK I SH ADD CORRECTION ¢3ONNECT 0 GUIDE 3. Press _ or _ to highlight either ANT 1 or ANT 2, depending on tile antenna terminal you wisIL to use.
A ÷ [ To program channels atttomatically: 1.Press MENU, and then press @ or _ until the SET UP menu appears. 2. Press A or V until the TV/CABLE is highlighted. 3. Press @ or _ to highlight either TV or (-;ABLE, depending on which you use. If'you use an antenna, highlight TV; if'you use cable, highlight (;ABLE. O SET UP TV front panel LANGUAGE CLOCK CH ENGL PROGRAM ADD/ERASE TILT CORRECTION QUICK C_3NNECT 4_ I SH SET ADD 0 GUIDE T Press Yto select CHPROGRAM.
A ÷ Changing To change [ channels to a specific channel Press the Channel Number (programmed buttons or unprogrammed): (0--9 and 100). For channels 100 and higher, press the i 00 button, and then the next two numbers. For example, to select channel 125, press 100, 2_5. To change to the next programmed on the Press Channel A or V Changing channels using -- Channel Number channeh TM or remote control. SpeedSurf To use SpeedSurf to change to a specific programmed channeh 1.
Using the TV's features Adjusting Switching the channel between two settings channels using Channel Return TLe Ci_am_el Return feature allows you ro switcl_ between _vo chamlels without entering an actual cham_el number eacL time, -- 1. Select the first clmxmel (or video mode) you want to view. 2. Select a second (0-9, 100). clmmlel using t}le Ctlal_ll_lel NUl_l[_er [_uttol_lS 3. Press CH KFN.
A ÷ L 3. Press 4J or _ to display the FAVORITE CH1 menu, for example. CH INPUT will be highlighted. @@@@@@ Note: o The FAV _.V buttons ope/_,te as MENU a,T buttons when a menu £ onscreen. o The favorite channe/feature in ANT2 mode TIMER ON SLEEP is not avai/ab/e, 00h00m Oh00m CH LABELING VIDEO LABEL _ _ 0 0 BACKGROUND 0 0 _V (Ai!_[_ ALL CLEAR Press the Channel Number buttons to enter one of'your f'avorite channels. 4_ 5. Press ENTER. 6. Repeat steps 4 and 5 for other channels.
Labeling channels Channel labels appear above the on-screen channel number display each time you turn on the TV, change a channel_ or press RECALL. Y_)ucan choose any f'our characters to identif} a channel You can assign labels to a maximum of 32 channels. To create channel labels: 1. Press MENU, and then press _ or _ until the CUSTOM appears. menu 2. Press A or _' to ldghlight CH LABELING. 3. Press @ or _ to display the CH LABELING menu. Channel Number CH iNPUT will be highlighted.
5. Press T to highlight CLEAR. TEMER ON SLEEP CO FAVORITE 00h00m O_00m OFF OH1 6. Press *q or _ to erase the channel label. 7. Repeat steps 4-6 to erase other channel labels. Viewing the wide-screen picture formats You can view programs that have the conventional TV picture f'ormat (4:3 aspect ratio) and the wide-screen f'ormat (16:9 aspect ratio) in dif'kerent image shapes. This feature is available f'or TV or DVD video signals input f'rom the VIDEO 1/2/3, ColorStream HD-1/HD-2 and DVI iacks.
÷ L Compression The picture is vertically compressed, with black bars at the top and Nora." DO[EOI_L You a/so can c'harwe file irnage shape using t/_e menu syslem Select IMAGE SHAPE in t/_e THEATER menu, O THEATER DoH_y Virtual WOW SRS 3D FOCUS CINEMA Squeezed signa! Compression MODE OFF OFF OFF VEDEO mode Zoom A picture is expanded by 1.33 times.
Using the auto aspect feature When receiving a 480i signal the TV will automatically change the image shape by reading aspect infbrmation (I[)-1 data) f'rom the input signal if the signal does not include aspect inf'ormation (ID-1 data), the image shape mode you set on pages 31-32 is selected. Note; To turn on the auto aspect: ° The image shape seleclk:_n ls possible even 1. Press MENU, and then press @ or _ until theTHEATER appears. menu 2.
A ÷ Using the POP doubme-window L Noto: feature • ThegPL/Tbutk)r?on#leremotec;antm/ The POP (picture-out-picture) feature splits the screen into a double window tlaat allows you to warcla two programs at die same time. TLe POP program can come from a TV broadcast or an external source, such as a VCR. opens file TV_ POP winr/aw • You cannot access POP features when viewing DV/ input • Yaucar?notdisp/aytheANT-2signa/soume in the POP windo_z To display a TV broadcast in the POP window: 1.
A ÷ Switching the main and [ POP pictures Press SWAP while yo_t are _tsing the POP feature to switch the main and POP pictures. Freezing the POP picture 1. Press FREEZE while the POP is not on the screen. The POP window will appear with a still pict_tre. 2. Press FREEZE again to renew the still picture. -- FREEZE O O SWAP To erase the still POP window: Still picture Press EXIT.
A ÷ POP double-window aspect L ratio Note The POP double-window f'eature displays each picture according to its input signal, as illustrated below. * TheAUTOASPECTfeat_Jfe (page 33] does not opemt> in the doub/e-wit_dow mode, * Aspec't Ratio is file mlfo ofwidl# to he_qht of the pictum.
A ÷ Using the favorite channel search [ function You can use the favorite channel search function to quickly scan your f'avorite channels (see 'Programming your favorite channels" on page Press FAVORITE. The TV atttomatically enteis POP mode, and begins a sevenpicture scan of'your fhvorite channels. 3 _ 4 _j_ -- FAVORITE ENTER _, 9 2. Press AV@ _ to select one of the seven pictures (becomes a moving picture). The main picture is always moving. 3.
A ÷ [ Using the LOCKS menu The LOCKS men. includes the V-CHIP_ CH LOCK, VIDEO LOCK, and NEW PIN CODE f.nctions. 1q)u can use these ftmlctions after entering the correct PIN code. Note: The V-C'hip furTc'tior7 is available LJ,_ V-Chip system, on/;/for the Canadian V-Chl;> The syst_r7 7 is not suppO l l_CL Entering the PIN code 1. Press MENU, and then press _ or _ until the LOCKS menu appears.
A ÷ Using the V-CHIP L menu Some TV programs and movies include signals that classi_ the content of" the progiam (violence, sex, dialog, language)+ The V-CHIP conrol feature in this TV detects the signals and blocks the programs according to your selections. To use this feature, perf'orm the f'ollowing setup+ ENABLE Note: The V-Chip func;tion is awil_Dle only for the t.
MPAA RATUNG (Undependent taring system for movies) LOCKS memt 1. From the LOCKS memo, select MPAA RATING. 2. Press @ or _ to display the MPAA RATING menLt, then press Y or A to highlight MPAA RATING. @@@@@@ V 0 LOCRS CHIP ENABLE VIDEO GAME FRONT NEW BLOCKING LOCK TIMER PANEL PIN LOCK ON OFF OFF OFF CODE To select each item: Press YorA. 3. Press _ to lock ("X") or press @ to unlock ("/").
Unlocking ][f yott programs try to watcll temporarily a TV program t}lat exceeds tlle rating limits you set, the TV enters program lock mode. Af'rer 4 seconds, the TV starts the auto f_vorite cLannel search f:_mction (see page 37).
A ÷ [ To unlock individual channels: 1. From the LOCKS menu, select CH LOCK. 2. Press _ or _ to display the CH LOCK l_nen[t. 3. Press AT'@ _ to highlight the channel you want to unlock, press ENTER.
A ÷ Using the game L timer You cai_ use the game timer to set a time Iimit fbr playi_% a vide() game (3(}-12(1mim*tes). Whei_ the game timer is activated, the TV ei_ers VIDEO LOCK mode and locks out the ii)put source _br the video game device. /Vote: To set the game timer: 1. From tl)e LOCKS menu, select GAME TIMER.
A ÷ Adjusting the picture Semecting the picture You can select L your mode desired picture Note: ,type f}om f_)ur picture modes: Sports, Standard, Movie, and Preference. If you select one of the factory-set pic,,tum modes (SPORTS; STANDARD& or MOVIE] and lfTen d?ange a pk;tuf_ quality setting (for exarr_p/e, inc.rease the rontmsO, #_epicture tootle autematica//y changes to PREFERENCE if7UTe Picture menu.
Saving your new preferences You can save the PICTURE qualities (contrast, brightness, color, tint, and si_arpness) you adjusted in the picture preference mode. To save your new preferences: 1. Press MENU, and then press _ or _ until the PICTURE mel_lu appears. 2. Press A or V to higiflight SAVE NEW PREFERENCE. 3. Press @ or _. When complete, the menu displays '_DONE.
Semecting the comor temperature You can cllange the quality of the picture by selecting from three preset color To select temperatttres: the color cool, medittm_ and warm. temperature: 1. Press MENU, and then press _ or _ tmtil the HCTURE appears. mem_ 2. Press A or _' to Liglfligllt COLORTEMPER£FURE. 3. Press @ or _ to Lighligllt the mode you prefer.
Selecting The the Scan Velocity SVM featt_re feature has three To select the SVM enhances modes: pict_re Modulation contiast and (SVM) sharpness. This H_GH, LOW, and OFE /Vote: SWill] is/?of fequirecJ w/?en dewi/w some h_qh-quality vid_o /7181efJ_*[l/you 81e feat_re: i. Press MENU, and then press _ or _ tmtil the P_CTURE men_ appears. watc'/_kW h/_gh-qua/i/y vAleo mate/re,I, you r_Tay want to set SVI_ to OFF 2. Press A or V to highlight '%VM". 3.
A ÷ Selecting the video input [ source Press iNPUT on the remote control or TV/VDEO on the T2/f}ont pang to view a signal fl"om another device connected to your TV, suc}_as a VCR or video disc player (see illustrations below). You can select ANT 1, VIDEO 1, VIDEO 2, VIDEO 3 ColorStream HD 1, ColorStream HD2, DV], or ANT 2 depending on which input iacks you used f_}r connecting your devices (see "Connecting your TV" on page 7).
Using the closed caption feature The closed caption f'eature has two options: . Captions_An on-screen display of the dialogue, narration, and sound effects of TV programs and videos that are closed captioned (usually labled ' CC'). . Text An on-screen display ofinf'ormation not related to the current program, such as weather or stock data (when provided by individual stations). To view captions or text: 1. Tttne the TV to the desired program. 2.
A ÷ Setting [ the ON-timer To set the ON timer to turn on the TV automatically: SLEEP 1. Dess MENU, and then press @ or _ until the CUSTOM menu appears. 2. Press A or V to highlight ON. POWER Number 3. A_'rer the tlttl_nbet" position starts to blink, press the Number buttons (0-9) to enter the length of time until ti_e TV turns on automatica!l> You can set the ON timer in (}-minute increments, to a maximum of 12 hours. MENU 4. Press ENTER to start the timer.
A ÷ Setting L the cmock To set the clock: 1. Press MENU, and then press; @ or _ mltil the SET UP menu appears. Note : /flDe TV_ power source is intemJpted (lt_e power c'ord is unpludjed or a pov,lef f;_/lufe occurs], the dock must be mseL 2. Press A or V to highlight CLOCK SET. 3. Af}er the mtmber position starts to blink, press the Number buttons (0-9) to enter the correct time. TLe clock operates on a 24-hour cycle only. 4. Press ENTER to start the clock.
Adjusting Muting the sound the sound Press MUTE to temporarily reduce (1/2 MUTE) or turn off (MUTE) tlle sound. Wt:ile the sound is muted, tile screen will display '112 MUTE" or "MUTE" in the lower rig}at corner. Every tittle you press MUTE, the mute mode will change in the f'ollowing order. I-->Normal --> 1/2 MUTE --> MUTE --I When you se}ect "MUTE" mode, the closed caption feature is automatica}ly activated (if the closed caption mode is set to OFF). To deactivate this f'eature, deactivate MUTE.
A ÷ Enjoying the Dolby Virtual sound The Dolby* Virtual sound surround sound from feature allows 7, the T\ s speakeis. L feature [Vote: yott to enjoy virtual connect a device (such as a game console, DVD player, or DTV receiver) with anaJog audio output to standard (analog) audio terminals on the TV, and the input source is encoded with Dolby Surround [IB_ sound or Dolbv Di._ital [1t1_ sound, the Dolby Virtual feature fhnctions as Virtual DoJby Surround 9_ (VDS).
Using the WOW _ surround sound feature WOW is a special combination of SRS Labs audio technologies dmt creates a thrilling surround sound experience with deep, rich bass from stereo sound sources, Your TV's will sound riffler, richer and wider. To adiust the WOW feature: 1. Select STERE() mode (See _Selecting stereo/SAP broadcasts" on page 52). 2. Press MENU, and then press _ or _ until the THEATER appears. MENU menu a,T4 3.
A ÷ Resetting your audio [ adjustments The RESET function returns your audio adjustments to t}Lef'ollowing fhctory settings: Bass .................. center (5(}) Treble ............... center (50) Balance ............ center (0) To reset your audio adjustments: 1. Press MENU, and then press @ or _ until the AUDIO appears. 2. Press A or V to iflghlight RESET. MENU menu 3. Press @ or _. The menu dis >lays "DONE.
A ÷ Turning off the buiRqn L speakers Use this feature to turn Of_" tl_eTV speakers wt_en you connect an audio system (see ' Comlecting an audio syste_f' on page 14). Make sure the volume cont_o/ of your aud/b amplifier is set to a modemt_ //sten/_g /eve/ To turn off"the built-in speakers: 1. Press MENU, then press @ or _ until AUDIO Note: menu appears. 2. Press & or V to highlight SPEAKERS. 3.
Using the StableSound _ feature Wl_en the signal som°ce is c}_anged, the StableSom_d C_feature limits the highest example, wLen voltmle level to prevent a TV program To turn on to prevent the sudden switci_es the StableSotmd extreme increase cLanges in voltmle il_lvolume (fk)r ti_at of_ten Lappens to a col_ll_lercial). <_feature: i. Press MENU, and tl_en press _ or _ tmtil the AUDK) l_*iel_lU appears. 2. Press A or Y to Ligi_light STABLE SOUND, 3. Press _1 or _ to select ON.
A ÷ Viewing the demo [ mode Tl_e demo mode automatically demonstrates several of'your T\l's f'eatures. To start the demo: Press DEMO on ti_e TV front panel. To stop the demo: Press DEMO, RECALL, EXIT, or POWER. Understanding the auto power off feature The TV will atttomatically tuna itself off after approximately 15 minutes if it is tuned to a vacant channel or a station that completes its broadcast for the day. This feature does not work in VIDEO mode.
A ÷ Dimensions 32HFX73: TeJevMon Systenr NTSC stand _rd Channel UHF: 13 14 through 69 Cable TV: Mid band (A-8 dwough Super band (.! through Hyper A-l, A drrough Height Depth I) 34-1/2 inches (875 ram) 26 1/2 inches (671 mnr) 225/8 inches (575 ram) 38-}/16 inches (970 ram) 29-9/16 irrches (751 mnr) 24-1/4 inches (615 ram) W) band (AA drrough Ultra band (65 drrough Width Height Depth 36HFX73: Width Coverage VHF: 2 through Po\vel; [ Mass ZZ, AAA, BBB) 94, 100 drrough 125) 32HFX73:156 l
A ÷ Bef'ore callhlg a service technician, some solutions. please check the f'ollowing [ table f'or a possible cause of the problem Problem Solution TV wi[[ not mrn on * Make sure the power cord is p_ugged in, then press POWER. • The remote control batteries may be dead. Rephce No picture, no sound * Check the antenna/cable No sound, picture OK * The sotmd may be muted. and the batteries. connections. Press VOLUME. • The station may have broadcast dif'ficuhies.
Limited United States for 27" FST PURE _ and All ]oshiba Amelica Consumer Roducts, Inc. {"TACP"} and Toshiba Hawaii. Inc. ("TH F} make the following limited wananties to oiiginal consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS TELEVISION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE. PRODUCTS PURCHASED IN THE U.S.A. AND USED IN CANADA ARE NOT COVERED BY THESE WARRANTIES.
Limited Caaaaa for 27" FST PURE" and All Larger Toshiba of Canada Limited ("TCL"} makes the following limited warranties to odginal cons(Jme_s in Canada, PRODUCTS PURCHASED IN THE U.S.A. AND USED IN CANADA ARE NOT COVERED BY THESE WARRANTIES.
i A OP A/V cables (:standard} ......................................................... 7 ON-timer ................................................................................. 50 A/V receiver connection ................................................... 14 ANT 1/2 ................................................................................... 25 COLOR TEMPERATURE .............................................. 46 Antenna cables (coaxial} ...................................................
TOSHIBA AMERICA CGNSUMER HEAD OFFICE: 82 TOTOWA ROAD, WAYNE, NJ 07470, U.S.A. NATIONAL SERVICE DIV[SION:1420-B TOSHIBA DRIVE, LEBANON, TOSHIBA HEAD OFFICE: 327 KAMAKEE TOSHIBA NAWAH, STREET, HONOLULU, OF PRODUCTS, TN 37087, U.S.A. [NO° Hi 96814, U=S=A=-TEL: CANADA (808) 591-9281 LTD. HEAD OFFICE: 191 McNABB STREET, MARKHAM, ONTARIO, L3R 8H2, CANADA -TEL: SERVICE CENTERS: TORONTO: 191 McNABB STREET, MARKHAM, ONTARIO L3R 8H2, CANADA MONTREAL: 1643 NORTH SERVICE RD.