Contents SETTING UP Safety Precautions – Some do's and don'ts for you to be aware of Installation and important information The remote control – an at-a-glance guide Connecting external equipment – a guide to connecting equipment to the back of the television Side Connections and controls – switching on the television, standby, using the side controls, headphone socket, connecting equipment to the side of the television Tuning the television – digital tuning, programme sorting Tuning the television – digita
Safety Precautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased.
Installation and important information Where to install Locate the television away from direct sunlight and strong lights; soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Place on a sturdy platform, the mounting surface should be flat and steady. It must then be secured to the wall with a sturdy tie using the clip on the back of the television, this will prevent it from falling over.
The remote control Simple at-a-glance reference of your remote control. Standby mode To mute the sound To select TV programme number To return to the previous programme in TV mode. To display the digital on-screen Programme Guide GUIDE MENU BACK To select between analogue and digital TV, or an external source To view ATV, DTV,PC and other AV inputs picture-in-picture (pip) or picture-and-picture (pap) modes.
Connecting external equipment Before connecting any external equipment, disconnect from the main power. English - 5 - 20_23790W_TOSHIBA_MB22_CT8003_(PAN_EU-DVB-T) 5 (20W330DG-23W330DG).p65 02.04.
Connecting external equipment continued, Connecting the PC via PC input Aerial cables: Connect the aerial to the socket on the rear of the television. If you use a decoder and/or a media recorder it is essential that the aerial cable is connected through the decoder and/or through the media recorder to the television. SCART leads: Connect the media recorder IN/OUT socket to the television. Connect the decoder TV socket to the television.
Connections and controls A wide variety of external equipment can be connected via the sockets located on the side of the television. Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the top of the television may be used for some functions.
Digital Tuning Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected to your television. To set up the television use the buttons on the remote control as detailed on page 4. Connect the mains plug and switch the TV into standby using the rear Power button. Press any numbered or standby button on the remote control, the Local Options screen will appear.
Digital programme sorting , continued programme sorting , auto tuning, manual tuning Programme sorting Auto tuning The station order may be changed, for instance if the picture is unclear or the signal is weak. Press MENU, the SETUP MENU will appear on the screen. Use to move down through the list and highlight Programmes. Press OK. Auto tuning will completely re-tune the television. All current programme sorting and settings, i.e. favourites and locked programmes, will be lost.
Analogue Tuning and programme sorting Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected to your television. To set up the television use the buttons on the remote control as detailed on page 4. When ATV (Analogue TV) is selected for the first time; the A.P.S. screen will appear.
Manual tuning The television can be tuned-in manually using INSTALL. For example: if the television cannot be connected to a media recorder/decoder with a SCART lead or to tune-in a station on another System. Manual tuning To allocate a programme position on the television for a decoder and media recorder: turn the decoder on, insert a pre-recorded film into the media recorder and press PLAY, then manually tune. Press MENU and using the Left or Right button select INSTALL menu.
Analogue APS, choosing a language APS (AUTOMATIC PROGRAMMING SYSTEM) When the APS (AUTOMATIC PROGRAMMING SYSTEM) feature is selected all channels and settings will be lost, the television will return to factory settings and then re-tune. Press MENU and using the Left or Right button select INSTALL menu. By using Up or Down buttons, select PROGRAM TABLE and press Right button.
Analogue general controls, time display, stereo/ bilingual transmissions, child lock The Time Display The time display facility allows the current (text service) time to be seen on the television screen. Analogue TV menus will appear on the screen. Press Left or Right button select the FEATURE menu. Press the Down button to choose Child Lock and press the Left or Right button to turn it on or off. Press whilst watching a normal television broadcast to see a time display from the broadcaster.
Picture format Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats.Press button repeatedly to select between Auto, Wide, 4:3, Super Live, 14:9 Zoom, Cinema or Subtitle. the When Auto is selected the format being displayed is determined by the picture being broadcast. WIDE 4:3 SUPER LIVE 14:9 ZOOM CINEMA SUBTITLE Use this setting when watching a 16:9 broadcast. Use this setting to view a true 4:3 broadcast.
Analogue Picture controls — picture mode, hue, colour temperature, noise reduction, film mode Picture mode This television offers the choice of personalising the picture style. Press to view the different styles available: PICTURE CINEMA, DYNAMIC and NATURAL. Sharpness Select the PICTURE option from the main menu. Colour Hue Colour Temp.
Analogue Picture controls continued — 3D comb, blue background, PIP, PAP 3D Comb Picture-in-Picture (PIP), Picture-and-Picture (PAP) 3D Comb is used to improve colour transitions and colour quality of pictures. In the PICTURE menu press the Down button until 3D Comb is highlighted. Press the Left or Right button to turn it On or Off.This function is visible in ATV modes only. NOTE: This feature only allows PC mode plus another signal/input. Press the button to switch to PIP mode.
Timers Remember: When viewing in digital mode if analogue is required press , Source menu appears on the screen and select ATV/DTV. To return to digital viewing, select ATV/DTV in Source menu. Programme timers - digital SET TIMER This feature sets the television timers to record programmes. The “Repeat” feature can be set to record “daily” and “weekly” to ensure a series of programmes are recorded. Press MENU and or Programme BBC FOUR Date Sat, 21 Aug .
Digital Programme Guide and on-screen information When viewing in digital mode the on-screen information and guide give access to programme details for all available channels. Recording can also be set from both the information screen and guide. Information Guide Select information by pressing , the information screen will appear giving details of the channel and programme currently being viewed. 13.45 Sat, 21 Aug.
Digital parental controls - setting the pin, mode There are a number of parental controls which can block specific channels being viewed, and which can only be accessed with a security PIN code when in digital mode. Once you’ve entered the PIN code, you do not need to enter it again until next time you power-on TV. To restore PIN code entry again (e.g. for parental controls on locked programmes) press STANDBY twice. Setting the PIN Press MENU and Mode to select FEATURE MENU.
Digital settings - favourite programmes, locked programmes, encrypted programmes Selecting Favourite Programmes Locking Programmes Favourite Programmes creates a list of the digital channels that are watched most. Four lists can be created, this can be a mixture of television, text and radio channels. Locked programmes stops the viewing of selected digital channels,which can only be accessed by entering the PIN. From the FEATURE MENU press to select Favourite and Locked Programmes and press OK.
Digital settings continued - country, language and audio languages Country Language This feature allows you to select a country option for the APS installation process. From the SETUP MENU press OPTIONS. to select LOCAL This feature will define the Menu language selection. From the LOCAL OPTIONS menu press Language item.
Digital settings continued - audio languages, subtitles, audio output, reset tv, common interface, local time settings Reset TV Selecting Reset TV will delete all stored digital and analogue channels and settings. The television will return to factory settings and then auto tune. Press MENU and then press highlighted. Note: If more than one sountrack is available, use button to select between them. This option is dependent on transmission received. Press OK to select.
Digital settings continued - version, auto upgrade and searching for new software Version Searching for new software This feature can be used to check the version of software currently installed. If prefered, software upgrades can be searched for manually using Search For New Software. From the FEATURE MENU press ware Upgrade. to select Softt- In the SOFTWARE UPGRADE menu press to select Search For New Software. or SOFTWARE UPGRADE FEATURE MENU Favourite and Lock ed Programmes ENTER Version 0.
Analogue sound controls — volume, sound mute, equalizer, balance Sound Controls Using the Up and Down buttons select a frequency and then Left and Right buttons to adjust to suit personal taste. Note that user mode settings are stored automatically. Volume Press or to adjust the volume. Press EXIT to return to TV.. Sound Mute Sound Balance Press on the remote control once to turn the sound off and again to cancel. Press the Right button to select the SOUND option from the main menu.
Analogue sound controls continued — headphone, AVL, effect, dynamic bass Headphone AVL - Auto Volume Limiter The Headphone feature allows you to alter the sound from headphones when connected to the socket on the side of the television. AVL limits high volume levels and prevents the extreme changes in volume that can occur when channels are changed or a programme switches to a commercial. Select the SOUND option from the main menu. In the SOUND menu press the Down button to highlight AVL.
Input selection, AV connections Settings for the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 5 and 6 for a clear view of the back connection recommendations and page 7 for the side connections. Most media recorders and decoders send a signal through the SCART lead to switch the television to the correct Input socket. Alternatively press the external source selection button to select the source from the menu displayed.
PC Mode PC Picture Position and PC Picture menus are described below. The other menu items are identical to TV mode menus. Please see the previous sections. For connections please refer to page 5. Autoposition Dot Clock If you shift the picture horizontally or vertically to an unwanted position, use this item to put the picture into correct place automatically.
PC input typical display modes Mode 1 2 3 4 5 6 7 8 9 10 11 12 13 Resolution Frequency Horizontal Vertical Hor.(kHz) Ver.(Hz) 640 640 640 800 800 800 800 1024 1024 1024 1280 1280 1360 480 480 480 600 600 600 600 768 768 768 1024 768 768 31,5 37,9 37,5 35,2 37,9 48,1 46,9 48,4 56,5 60 64 47,8 47,7 60 72 75 56 60 72 75 60 70 75 60 60 60 English - 28 - 20_23790W_TOSHIBA_MB22_CT8003_(PAN_EU-DVB-T) 28 (20W330DG-23W330DG).p65 02.04.
Digital and Analogue text services Digital Text see the broadcast text index page or, consult your local Toshiba dealer. The digital text services are the up to date way of viewing service information. Below is a guide to the functions of the remote control text buttons. These services are free to anyone using a digital television, however; they are not available for all digital stations and are dependent on the broadcaster.
Q uestions and Answers B e lo w a re th e a n s w e rs to s o m e o f th e m o s t co m m o n q u e rie s . Fo r m o re in fo rm a tio n , g o to w w w .to s h ib a .co .u k Q A W hy is the re no so und o r p icture ? C h e ck th e m a in s s w itch is o n a n d ch e ck a ll co n n e ctio n s . C h e ck th e te le vis io n is n o t in s ta n d b y m o d e .
Questions and Answers Below are the answers to some of the most common queries.For more information go to www.toshiba.co.uk Q A Why is the DTV main menu unavailable? Q A Why is the digital channel locked? Q A Why can only certain digital channels be viewed? Favourite Mode has been set to On. See page 21 . Q Why are some encrypted digital channels unavailable? A Analogue mode (ATV) is selected. Press to select DTV. The channel has been selected in the locked programmes list, see page 21 .
Notes For your own records English - 32 - 20_23790W_TOSHIBA_MB22_CT8003_(PAN_EU-DVB-T) 32 (20W330DG-23W330DG).p65 02.04.
Notes For your own records English - 33 - 20_23790W_TOSHIBA_MB22_CT8003_(PAN_EU-DVB-T) 33 (20W330DG-23W330DG).p65 02.04.
Specifications and accessories 20W330DG Broadcast Systems / Channels UHF UK21-UK69 PAL I VHF E2-E12, S1-S41 UHF E21-E69 PAL-B/G VHF E2-E12, S1-S41 SECAM-L SECAM-D/K UHF F21-F69 VHF F1-F10, B-Q UHF R21-R69 VHF R1-R12 DVB-T Broadcast Systems VHF country UK France 05-12 Germany 05-12 05-12 07 Italy excluded Spain Switzerland 05-12 Sweden 05-12 Finland 05-12 Greece 05-12 Austria 05-12 100 Stereo Nicam, German 2 carrier system Visible Screen Size (approx.
Specifications and accessories 23W330DG Broadcast Systems / Channels UHF UK21-UK69 PAL I VHF E2-E12, S1-S41 PAL-B/G UHF E21-E69 VHF E2-E12, S1-S41 SECAM-L UHF F21-F69 VHF F1-F10, B-Q SECAM-D/K UHF R21-R69 VHF R1-R12 DVB-T Broadcast Systems country VHF UK France 05-12 Germany 05-12 05-12 Italy excluded Spain Switzerland05-12 Sweden 05-12 Finland 05-12 Greece 05-12 Austria 05-12 External Connections AV-1 Input Nicam, German 2 carrier system Visible Screen Size (approx.
DICHIARAZIONE Dl CONFORMITÁ La Societá Toshiba Information Systems (U.K.) Limited Consumer Products Division, European Service Centre, Admiralty Way, Camberley, Surrey GU15 3DT. dichiara che i prodotti Televisori a colori - Toshiba - Modelli 20W330DG, é costruito in conformitá alle prescrizioni del D.M. n. 548 del28/8/95 pubblicato , sulla G.U. n. 301 del 28/12/95 ed in particolare é conforme a quanto indicato nell'art. 2, comma 1, del decreto stesso.
DICHIARAZIONE Dl CONFORMITÁ La Societá Toshiba Information Systems (U.K.) Limited Consumer Products Division, European Service Centre, Admiralty Way, Camberley, Surrey GU15 3DT. dichiara che i prodotti Televisori a colori - Toshiba - Modelli 23W330DG, é costruito in conformitá alle prescrizioni del D.M. n. 548 del28/8/95 pubblicato , sulla G.U. n. 301 del 28/12/95 ed in particolare é conforme a quanto indicato nell'art. 2, comma 1, del decreto stesso.
