MULTIFUNCTIONAL DIGITAL SYSTEMS Operator’s Manual for Bluetooth Module GN-2020
©2011 TOSHIBA TEC CORPORATION All rights reserved Under the copyright laws, this manual cannot be reproduced in any form without prior written permission of TTEC. No patent liability is assumed, however, with respect to the use of the information contained herein.
Preface Thank you for purchasing TOSHIBA Multifunctional Digital Systems or Multifunctional Digital Color Systems. This manual explains the instructions for Bluetooth Module GN-2020. Read this manual before using your Multifunctional Digital Systems or Multifunctional Digital Color Systems. Keep this manual within easy reach, and use it to configure an environment that makes best use of the e-STUDIO’s functions.
Precautions Precautions for Use This product is classified as “wireless equipment for stations of low-power data transmissions systems” under the Wireless Telegraphy Act, and does not require a radio transmission license. The law prohibits modification of the interior of this product. About TOSHIBA Bluetooth Solution The Bluetooth Module is with the Bluetooth version 2.1 + EDR. The Bluetooth Adapter supports data rates up to 720kbps.
WARNING Keep this product away from a cardiac pacemaker at least 22 cm. Radio waves can potentially affect cardiac pacemaker operation, thereby causing respiratory troubles. Do not use the product inside a medical facility or near medical electric equipment. Radio waves can potentially affect medical electric equipment, thereby causing an accident due to malfunction. Do not use the product near an automatic door, fire alarm or other automatic control equipment.
Regulatory Information The TOSHIBA Bluetooth Adapter must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards. Canada - Industry Canada (IC) This device complies with RSS 210 of Industry Canada.
Con la presente TOSHIBA TEC dichiara che questo GN-2020 è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Por medio de la presente TOSHIBA TEC declara que el GN-2020 cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE TOSHIBA TEC declara que este GN-2020 está conforme com os requisitos essenciais e outras disposicões da Directiva 1999/5/CE.
CONTENTS Preface....................................................................................................................................... 1 Precautions ............................................................................................................................... 2 Chapter 1 SETTING UP BLUETOOTH Enabling Bluetooth................................................................................................................. 10 Setting up Bluetooth HCRP Printing .............
8 CONTENTS
SETTING UP BLUETOOTH 1. This chapter describes the preparations before setting up the Bluetooth settings of the equipment. Enabling Bluetooth ................................................................................................................ 10 Setting up Bluetooth HCRP Printing .................................................................................... 13 Setting up Bluetooth BIP/OPP/FTP Printing ........................................................................
1 SETTING UP BLUETOOTH Enabling Bluetooth You can use the Bluetooth SETTINGS screen to enable or disable the Bluetooth and configure the Bluetooth setting options. y If you cannot display the Bluetooth SETTINGS screen even if the Bluetooth Module is installed, contact your service technician or product distributors. y Screens of e-STUDIO4550C Series are given in this manual as examples.
1 SETTING UP BLUETOOTH 1.SETTING UP BLUETOOTH 6 Specify the following items and press [OK]. y Bluetooth Select whether enabling or disabling Bluetooth. y [Bluetooth NAME] Press this to enter the device name that is displayed as the Bluetooth device. As the default, “MFPXXXXXXXX” has already been set for the Bluetooth name. Change this name if required. You can enter up to 32 characters. y DEVICE ADDRESS This displays the Bluetooth address. You cannot change this value.
1 SETTING UP BLUETOOTH 9 12 Press the[ON/OFF] button. The Bluetooth settings apply after restarting the equipment.
1 SETTING UP BLUETOOTH Setting up Bluetooth HCRP Printing When the Bluetooth is enabled, users can operate printing through the Bluetooth from Windows computers or Macintosh computers (Mac OS X 10.4.4 or later recommended) that have the Bluetooth module and have the capability for the HCRP connection. Before setting up Bluetooth HCRP printing, please make sure the Bluetooth module that is installed in your computer supports the HCRP profile.
1 SETTING UP BLUETOOTH Setting up Bluetooth BIP/OPP/FTP Printing This equipment also supports Bluetooth BIP/OPP/FTP printing that allows users to print an image from any devices, such as mobile phones or digital cameras, with which the Bluetooth module is equipped and any by which standard BIP/OPP/ FTP printing is supported. Before printing an image by BIP/OPP/FTP printing, configure the paper size and print type that apply to printing. y The following formats can be on each profiles.
APPENDIX 2. This chapter describes the specifications. Specification ...........................................................................................................................
2 APPENDIX Specification Item 16 Description Standard Bluetooth version 2.1 + EDR compliant Frequency Band 2.4 GHz (2400 to 2483.5 GHz) Data Rate Max. 720 kbps (Asymmetric) Max.
GN-2020 OME11007300
MULTIFUNCTIONAL DIGITAL SYSTEMS Operator’s Manual for Bluetooth Module GN-2020 2-17-2, HIGASHIGOTANDA, SHINAGAWA-KU, TOKYO, 141-8664, JAPAN ©2011 TOSHIBA TEC CORPORATION All rights reserved R110720K2200-TTEC VerB 2011-07
