FlashAir™ Wireless LAN embedded SD Memory Card User Manual First Edition / Rev.0.
Revision History Date 2016.12.16 Revision 0.
Table of Contents 1. FlashAir Memory Card Users Manual .......................................... 4 2. Manual ..................................................................... 4 3. LIMITED WARRANTY ........................................................... 4 4. LIMITATIONS ................................................................ 4 5. YOUR RIGHTS ................................................................ 5 6. UNINTENDED USAGE ........................................................... 5 7.
1. FlashAir Memory Card Users Manual ・Brand Name:Toshiba ・Model Number: WLSDTHNSWCAE 16GB ,32GB ,64GB 2. Manual Thank you for purchasing this Toshiba product. To ensure proper use, please read this manual and your device manual carefully and entirely before using this Toshiba product, then retain this manual for future reference. 3. LIMITED WARRANTY This Toshiba Product (“the Product”) is warranted against defects in materials and workmanship for one (1) year from the date of purchase.
of the implied warranty will be one (1) year from the purchase date. Toshiba’s only obligation will be the replacement of this Product. Toshiba will not be responsible for any special, consequential, incidental or indirect damages resulting from the sale, purchase, use or malfunction of this Product, regardless of the case.
Contact a doctor immediately if you suspect a child has swallowed the Product. Failure to follow the instructions below could result in fire, damage to the Product and/or personal injury including burns and electric shock. Do not disassemble or modify the Product. Do not bend, drop, place heavy objects upon the Product, or otherwise expose the Product to strong force or impact.
PRODUCT OR THE PRODUCT INSTRUCTIONS OR WARNINGS AT ANY TIME IN ITS SOLE DISCRETION AND WITHOUT NOTICE. UPDATED INFORMATION WILL BE PROVIDED VIA http://www.toshiba.co.jp/p-media/wwsite/index.htm * SD, SDHC and SDXC Logos are trademarks of SD-3C, LLC. * All other company product names may be registered trademarks of their respective companies. * The card in this package is made in Japan. © Copyright 2016-2017 Toshiba Corporation. All rights reserved. 11.
● Consult the dealer or an experienced radio or television technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. To comply with the FCC RF exposure compliance requirements, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.
Refer to the regulatory label provided on this product. EU Declaration of Conformity: This Product carries the CE-Mark in accordance with the related European Directives. Toshiba Electronics Europe GmbH, Hansaallee 181, D-40549 Dusseldorf, Germany is responsible for CE-Marking. For further information, please visit www.toshiba-memory.com Hotline: 0 180-5677765 from Germany 0,14 Euro/min.
The Product can be used with the devices which are compatible with 8GB SDHC memory cards. Before using the Wireless LAN capability of the Product, please set Wireless LAN security options. Do not format the Product with devices which are not compatible with the SDHC format.
After the installation is complete, a “FlashAirTool” icon will appear on desktop in a PC. Double-click the icon to start the FlashAir configuration software (fig.3). Select the drive which is assigned to the Product, and click “Card Setting”. Fig. 3 Fig.4 (2) When the above screen (fig.4) is displayed, enter the new network name in the SSID field and a new security key in the Password field. Click “Apply” to change. (3) This will complete your initial setup.
• The folder “100_TSB” is pre-written on the Product and the JPEG file “FA000001.JPG” is pre-written in the folder. When the Product is used in a digital camera, the below image will be displayed. This folder and the file are necessary for the operation of the FlashAir configuration software. Do not delete the folder and file, or you will be unable to change the automatic-manual operation for wireless LAN functionality.
