Specifications

101
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15
Pro Sweep
®
A productive tow behind turf sweeper that easily collects cores, grass clippings, leaves and other turf debris. Operated with a hand-held
wireless RF remote controller.
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.
Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.
PRO SWEEP, MODEL 07066*
POWER REQUIREMENTS
Utility vehicle with 8 gpm (30.3 liters/min.) @ 2000 psi, or tractor with a minimum of 25 hp (18.6 kW). Workman® HD Series vehicles require the high-flow
hydraulics kit.
CONTROL
Handheld wireless RF controller provides capability to hydraulically off-set the sweeper from transport to sweep position, raise the sweeper to a turn-around height,
and fully raise the sweeper to dump the collected debris.
SWEEPING WIDTH
52" (132 cm)
HOPPER CAPACITY
25 cu. feet (7.62 cu. meters)
COLLECTION SYSTEM
Hydraulic-powered rotary brush.
BRUSH SPEED
Forward sweeping speed 0-4 mph (0-6.4 km/h), infinitely variable (recommended speed 3 mph (4.8 km/h).
Forward transport speed with hopper in transport down position 0-15 mph (0-24 km/h).
ROLLER
6" (15.2 cm) diameter full-width roller directly behind rotary brush. Adjustable height.
HITCH
.75" (1.9 cm) hitch pin with safety linchpin.
HYDRAULIC CONNECTION
8 gpm (30.3 liters/min.) @ 2000 psi max (3600 rpm high idle), dual quick couplers with 2-hose connection, dash-mounted
ON/OFF switch.
TRANSPORT POSITION
Tow sweeper directly behind or offset to the side of the vehicle.
SWEEP POSITION
Off-set to the left side of the tow vehicle.
TRACTION
Pivoting sub frame allows for positive tongue weight.
GROUND FOLLOWING
Floating brush housing.
LIFT
Hydraulic powered lift cylinder. High-lift.
TIRES
26.5 x 14-12 (67.3 x 35.6-30.5 cm)
DIMENSIONS
Height: 68" (173 cm), Length: 145" (368 cm), Width: 87" (221 cm), Dump Height Clearance: 68" (173 cm).
WEIGHT
1,512 lbs. (686 kgs) empty.
WINDROW KIT
Standard.
OPTIONS
Brake kit, wheel scrapers, adjustable jack stand.
WARRANTY
2-year, comprehensive.
The Pro Swwep is manufactured
in Tomah, WI ISO 9002 Certified Plant.

Summary of content (1 pages)