Sell Sheet

Precision™ Series
Spray Nozzle
Sprays
Toro’s Precision
™
Series Spray Nozzles are the most
complete and efficient spray nozzle line available to help
irrigation professionals manage water use, eliminate runoff and
reduce customer water bills. The Precision
™
Spray nozzles 1”/
hr. precipitation rate ensures that water is applied more slowly
and evenly without sacrificing landscape health. These nozzles
are available in a wide selection of arcs and radii, as well as male
and female threads, making them ideal for large scale installations
and retrofits. The Precision
™
Series Spray Nozzles are now also
available in pressure-compensating versions, further enhancing
the best-in-class spray nozzle in the industry.
Male- or Female-threaded
Nozzles Fit Toro
®
, Irritrol
®
Rain Bird
®
and Hunter
®
Spray Bodies
Features & Benefits
Patented H²0 Chip Technology
Using patented H²0 chip technology – and no moving parts – each
Precision Series Spray nozzles creates one or more high frequency oscillating streams to
achieve the desired arc and radius with 1/3 less water usage.
Maximize Irrigation Efficiency
Precision Spray nozzles deliver an industry first 1”/hr (25mm/hr) precipitation rate,
which better matches soil infiltration rate. This lower precipitation rate, along with high
distribution uniformity make this nozzles family the most
efficient nozzle from 5’-15’ (1,5-4,6m).
Pressure-Compensating Versions Available
Pressure-Compensating Precision
™
Series Spray Nozzles maintain 1”/hr (25mm/hr.)
precipitation rate and minimizes misting up to inlet pressures to more than 40 PSI,
minimizing the need for a regulating head, at fraction of the cost.
Design and Retrofit Effectiveness
The lower flow rate of Precision Series spray nozzles maximizes design
efficiency and saves on overall material costs by using fewer valves and less
controller stations. In addition, existing systems with low pressure can be fixed with
a simple retrofit of the existing high-flow nozzle.
Third-Party Performance Validation
Precision
™
Series Spray nozzles (non-Pressure-Compensating versions only) have
been tested and validated in the field and at the Center for Irrigation Technology (CIT).
Pressure Compensation Device
The elastomeric PCD disk opens and closes
in response to changes in inlet pressure
to maintain optimal performance, even
when the pressure rises higher than 40 psi.
The Pressure-Compensating versions are
indicated by the red stamped Toro logo,
while the non-Pressure-Compensated
versions are indicated by the white
stamped Toro logo.
No Moving or Sonic Welded Parts
Assures no variation at the end of the water
arc for better edge definition and consistent,
reliable performance.
The Patented H²O Chip
Competitor’s High Flow Nozzle:
12H Nozzle at 50 PSI = 1.83GPM
or 2.45”/hr.*
PSN with PCD Nozzle:
12H Nozzle at 50 PSI = 0.74 GPM
or 1”/hr.*
*Based on internal flow rate test data in Riverside, CA.
Up To
60% Less
Water!
PSN with PCD Performs
Under Pressure!