Greensmaster 3100/3150/3250-D ® Unrivaled cutting performance from the world’s most popular riding greensmowers.
® GREENSMASTER 3100/3150/3250-D Superior quality of cut for the most consistent and truest ball roll. The industry’s finest aftercut appearance and best playing surface from an all-new cutting unit. Proven performance from the legendary Toro triplex design. Long-lasting, powerful performance with minimal engine noise. Easy maintenance with a new cutting unit and fewer service points. ® Reduced turf compaction resulting from flexible, 2-ply floatation tires.
LEGENDARY C U T T IN G U N ITS DUAL POINT ADJUSTMENT The dual point adjustment (DPA) simplifies the bedknife-to-reel alignment process. A clicking dial on each side of the cutting unit adjusts and holds the bedknife in exact increments. It’s fast, easy and requires no special tools. The bedknife maintains a consistent angle throughout the life of the reel, providing the same quality of cut every time out.
SAFER HYDRAULICS SAFER HYDRAULICS Leak prevention is critical on and around the greens. We completely overhauled the hydraulic system on the 3150 to further prevent damaging leaks. The result is a mono-valve block design that requires no camshaft or detents and 17% fewer hydraulic connections. The Toro Guardian® Leak Detector is standard on the 3150 and optional on the 3250-D. ALWAYS ON THE JOB Mechanics and superintendents alike appreciate the service-friendly design of the Toro Greensmaster.
GN POWER OPTIONS A JOY TO RUN ® ® A JOY TO RUN Operator comfort is a key component to the Toro Greensmaster series. An ergonomic bucket seat, adjustable steering arm and a quiet engine keep the driver productive. Controls are easy to operate and located for driver convenience. A single joystick on the 3150 and 3250-D controls the cutting units, making operation more precise and easier to master. Additional safety features include a rollover protection system on optional 3-wheel drive models.
SPECIFICATIONS Greensmaster 3100/3150/3250-D Engine Fuel Capacity Greensmaster 3100 Model 04356 Greensmaster 3150 Model 04357 Greensmaster 3250-D Model 04383 18 hp (13.4 kW), Briggs & Stratton® ® Vanguard V-Twin cylinder, OHV, air-cooled gasoline engine. 18 hp (13.4 kW), Briggs & Stratton Vanguard V-Twin cylinder, OHV, air-cooled gasoline engine. 21 hp (15.7 kW) Briggs & ® Stratton/Daihatsu 850D 3-cylinder, water-cooled diesel engine. 7.5 gallon (28.4 liter). 7 gallon (26.5 liter). 6 gallon (22.
Riding Greensmaster Cutting Units with Dual Point Adjustment (DPA) 8-Blade: DPA, 04610; 11-Blade: DPA, 04611 Tractor Height of Cut Reel Weldment These cutting units will mount on any Toro riding Greensmaster. Cutting height is adjusted on front roller by two vertical screws and held by two locking cap screws. Bench HOC range is .062-.297" (1.6-7.5 mm). With high HOC kit, range is .285-1" (7.3-25.4 mm). Effective HOC may vary depending on turf conditions and bedknife installed.
SPECIFICATIONS Greensmaster® 3050/3100/3150 Cutting Units 8-Blade: 04404, 04408, 04468; 11-Blade: 04406, 04450 Type of Cutter Height of Cut Optional Bedknives HOC and Roller Adjustment Reel/Frame Bedknife and Bedbar Clip Frequency and Optimum HOC Range Bedknife to Reel Adjustment Reel Drive Rollers Three 21" (53 cm) reels. HOC range: 1/8 - 3/4" (3.2-19 mm). Effective HOC may vary depending upon turf conditions and bedknife installed. Bedknife Micro-Cut Bedknife Tournament Bedknife (SPA std.