Data Sheet

ManualsBrandsToro ManualsDriplineToro Drip In PC

Micro-Irrigation

Drip In

Pressure Compensating Dripline

A technologically superior

and cost effective

way to irrigate

• Difﬁcult topographical conditions

• Low and varying water pressures

• Installations requiring longer lateral runss

Features & Beneﬁts:

Highly clog resistant

Due to wide, deep turbulent passageways

and raised inlets.

Extremely accurate ﬂow rate

Due to high quality control standards.

Reduced labor and installation cost

No hole punching, lost emitters or handling

damage. Emitters are factory spaced.

Can’t separate

Because there are no clip-ons or connections.

Lower friction loss

Due to jointless design, allows longer runs and

fewer mainlines.

Versatility

Flow rates available in three hose sizes:

(0.550" (16mm), 0.620" (18mm) and 0.710"

(20mm)

Drip

Summary of content (6 pages)

PAGE 1
Drip In® PC Pressure Compensating Dripline Micro-Irrigation A technologically superior and cost effective way to irrigate • Difficult topographical conditions • Low and varying water pressures • Installations requiring longer lateral runss Features & Benefits: Highly clog resistant Due to wide, deep turbulent passageways and raised inlets. Extremely accurate flow rate Due to high quality control standards. Reduced labor and installation cost No hole punching, lost emitters or handling damage.
PAGE 2
Drip In® PC Design Advantages: High Resistance to Plugging Water enters the emitter through a raised filtration system. Debris is deflected upward and away from the inlet because of the unique construction of the emitter. This feature significantly reduces the amount of debris entering the emitter when the system is operating. The positioning of the raised inlet also prevents sediment from collecting near the inlet while the system is not operating, and being ingested into the emitter at start-up.
PAGE 3
Drip In® PC Spacings: 12" 18" 24" 30" 36" 42" 48" 54" 60" 0.550 " ( 16MM) D R IP IN ® P C D RIP L INE Head Loss v. Dripline Length and Emitter Spacing Drip In 16mm .53 GPH PC Emitter 0% Slope. 30 30 25 25 20 Head Loss (psi) Head Loss (psi) Head Loss v. Dripline Length and Emitter Spacing Drip In 16mm .42 GPH PC Emitter 0% Slope.
PAGE 4
Drip In® PC Spacings: 12" 18" 24" 30" 36" 42" 48" 54" 60" 0.620 " ( 18MM) D R IP IN ® P C D RIP L INE Head Loss v. Dripline Length and Emitter Spacing Drip In 18mm .53 GPH PC Emitter 0% Slope. 30 30 25 25 Head Loss (psi) Head Loss (psi) Head Loss v. Dripline Length and Emitter Spacing Drip In 18mm .42 GPH PC Emitter 0% Slope.
PAGE 5
DLT002_DripIn_PC_Brc 2/17/10 4:21 PM Page 6 Drip In PC ® 0.710" (20mm) Drip In PC Dripline ® Spacings: 12" 12" 18" 18" 24" 30" 24" 0.710 " ( 20MM) D R IP IN ® P C D R IP L INE 30" 36" Head Loss v. Dripline Length and Emitter Spacing Drip In 20mm .42 GPH PC Emitter 0% Slope.
PAGE 6
The growers most economical choice for vineyards, orchards, and row crops. Advantages: • Highly clog-resistant due to wide, deep turbulent passageways and raised inlets. • Extremely accurate flow rate due to high quality control standards. • Reduced labor and installation cost. No hole punching, lost emitters or handling damage. • Can’t separate because there are no clip-ons or connections. • Lower friction loss due to jointless design, allows longer runs and fewer mainlines.