Product Data Sheet BM026 BM026 Bluetooth Low Energy Module Datasheet Version 1.3 Issued date: Aug 21, 2019 BLTC Network Corp 9F., No.127-2, Anxing Rd., Xindian Dist., New Taipei City, Taiwan Phone : +886286663611 Mail : sales@bltcnetwork.com.
Product Data Sheet BM026 TABLE OF CONTENTS Revision History ................................................................................. 4 1. BNC BLE Module ........................................................................ 5 1.1 Introduction ..................................................................................... 5 1.2 Feature ................................................................................................ 5 2. Ordering Information ..............................
Product Data Sheet BM026 9.1 Federal Communications Commission (FCC) Statement ..... 16 Version : 1.
Product Data Sheet BM026 Revision History Version : 1.1 Revision Date Description V1.0 2018/07/01 Initial release V1.1 2018/10/08 Added ADC PIN V1.2 2019/03/16 Modify spec V1.
Product Data Sheet BM026 1. BNC BLE Module BM026 1.1 Introduction BM026 Bluetooth® module is a Telink’s 32Bit MCU SoC Bluetooth low energy products for the Bluetooth Smart market. BM026 increases application code and data space for greater application development flexibility. It is slim and light so the designers can have better flexibilities for the product shapes. The BM026 Bluetooth module compatible with Bluetooth standard and supports BLE specification up to version 4.2.
Product Data Sheet BM026 RF Output Power +7 dBm, Power Consumption TX: 30~35mA / RX: 20 Interface Port USB ,5 x PWM ,or 1 x I2C,1 x UART,5x GPIO, total 7 GPIOs for Option Pin define Processor Embedded 32 Bit MCU with clock Up to 48Mhz Memory Build-in 512KB Program Flash ,16KB SRAM Security Hardware AES-128 Encryption Firmware Upgrade OTA (Over the Air) or SWS wire Port Power Supply DC 1.9V~3.6V Operating Environment -40 ~ +85°C(VT to +125°C) , 0~95% RH Dimensions 27(L) x 13.5(W) x 2.
Product Data Sheet BM026 2. Ordering Information BM026XXX-X S S Software Ttpe: Hardware Type: E = External RF Pin out Version C = Onboard Chips Antenna Version P9E = TLSR8269 Topr -40~85°C With PA Versions P9V = TLSR8269 Topr -40~125°C With PA Versions N9E = TLSR8269 Topr -40~85°C Versions N9V = TLSR8269 Topr -40~125°C Versions Version : 1.
Product Data Sheet BM026 3. Pin Configurations 3.1 Pin Assignments BM026 Pin -Out Version : 1.
Product Data Sheet BM026 3.2 Pin Description P1 Pin Define Pin No Pin name Type Description 1 3.
Product Data Sheet BM026 2 SWS I/O 3 GND GND 4 DM I/O GPIO_PE2,USB Date Minus 5 DP I/O GPIO_PE3,USB Date Positive Version : 1.
Product Data Sheet BM026 4. Outline Drawing 4.1 Board Dimensions (Unit: mm) Note: ＊The P1 Slot All of Pin have 0.65mm hole design, It can use 1x9 1.27mm pith pin header parts to connection host board 5. Host PCB Footprint (Unit: mm) Note: ＊When Use the BM026 Module to design product. Please Layout BM026 in the upper right corner of the Host PCB, So as to ensure a good antenna efficiency. ＊Demarcation specifies the “Host PCB copper keep-out area” ＊The 6.5mm x 6.
Product Data Sheet BM026 6. Electrical Characteristics Absolute Maximum Ratings : Symbol Parameters Maximum rating Unit VDD Power Supply Voltage -0.3 to 3.9 V Tstr Storage Temperature -65 to +150 °C Tsld Soldering Temperature 260 °C VESD ESD protection (HBM) 2000 V Operating Conditions Min. Typ. Max. Unit 1.9 3.3 3.6 V Supply Voltage VDD I/O Supply Voltage V 3.3+/-10% Temperature Range (ET Versions) -40 - 85 ºC Temperature Range (VT Versions) -40 - 105 ºC Min. Max.
Product Data Sheet BM026 7. Recommended Temperature Reflow Profile Maximum number of reflow cycles: 2 Opposite side reflow is prohibited due to the module’s weight. (i.e. you must not place the module on the bottom / underside of your PCB and reflow). 7.1 Hand Soldering Hand soldering is possible. When using a soldering iron, follow IPC recommendations (reference document IPC-7711). 7.2 Rework Version : 1.
Product Data Sheet BM026 The module can be unsoldered from the host board. Use of a hot air rework tool should be programmable and the solder joint and module should not exceed the maximum peak reflow temperature of 250°C. If temperature ramps exceed the reflow temperature profile, module and component damage may occur due to thermal shock. Avoid overheating. Never attempt a rework on the module itself, (e.g. replacing individual components). 7.
Product Data Sheet BM026 8. Application Notes 8.1 Flash Use The BM026 Module has been calibrated by RF before leaving the factory , That has various ID and parameter information of the BM026 module need to be retained, Please don’t use the “EraseF” button to erase the All Flash of the BM025 module 8.2 Mounting BM026 has two sets of soldering pads, which allow it to be mounted both in horizontal and vertical position.
Product Data Sheet BM026 9. Compliance information Compliance Information Radio Environmental USA FCC Part 15 Subpart C FCC ID (BM026): OF7-BTM002 IC ID 3575A-BTM002 Bluetooth (BQB) Bluetooth Product Listing Declaration ID (DID) Not Ready Model Number: BM026P9E-C SS BM026P9V-C SS RoHS RoHS compilant REACH REACH compilant 9.1 Federal Communications Commission (FCC) Statement Compliance Statement This device complies with part 15 of the FCC Rules.
Product Data Sheet BM026 FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-ence in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Product Data Sheet BM026 This device is intended only for OEM integrators under the following conditions: In accordance with FCC Part 15C and RSS-210, this module is Transmitter device. listed as a Modular Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
Product Data Sheet BM026 Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Canada: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
