Owner's Manual

ManualsBrandsToro ManualsLawn Mower BagsTimeCutter Twin Bagger for 60 in. Fabricated Deck (2020 and Newer)

FormNo.3437-298RevA

60inBaggerKit

ZeroTurnRadiusRidingMower

ModelNo.79413—SerialNo.400000000andUp

Operator'sManual

Introduction

Readthisinformationcarefullytolearnhowtooperate

andmaintainyourproductproperlyandtoavoid

injuryandproductdamage.Youareresponsiblefor

operatingtheproductproperlyandsafely.

Visitwww.Toro.comforproductsafetyandoperation

trainingmaterials,accessoryinformation,helpnding

adealer,ortoregisteryourproduct.

Wheneveryouneedservice,genuineToroparts,or

additionalinformation,contactanAuthorizedService

DealerorToroCustomerServiceandhavethemodel

andserialnumbersofyourproductready.Figure1

identiesthelocationofthemodelandserialnumbers

ontheproduct.Writethenumbersinthespace

provided.

g005673

Figure1

1.Modelandserialnumberlocation

ModelNo.

SerialNo.

Thismanualidentiespotentialhazardsandhas

safetymessagesidentiedbythesafety-alertsymbol

(Figure2),whichsignalsahazardthatmaycause

seriousinjuryordeathifyoudonotfollowthe

recommendedprecautions.

g000502

Figure2

Safety-alertsymbol

Thismanualuses2wordstohighlightinformation.

Importantcallsattentiontospecialmechanical

informationandNoteemphasizesgeneralinformation

worthyofspecialattention.

Contents

Introduction...............................................................1

Safety.......................................................................2

TowingSafety.....................................................2

SafetyandInstructionalDecals..........................3

Setup........................................................................4

1PreparingtheMachine.....................................5

2InstallingtheWeights.......................................5

3InstallingtheAttachmentMount.......................6

4InstallingtheLatchRod....................................7

5AssemblingtheBaggerTop.............................8

6InstallingtheBaggerT op..................................9

7InstallingtheBafesandChute........................9

8ConnectingwiththeDischargeTube...............11

Operation................................................................12

EmptyingtheGrassBags.................................13

ClearingObstructionsfromtheBagger.............14

RemovingtheBagger.......................................14

UsingtheDrawBar...........................................14

OperatingTips.................................................15

Maintenance...........................................................16

RecommendedMaintenanceSchedule(s)...........16

InspectingtheBaggerAttachment....................16

InspectingtheMowerBlades............................17

CleaningtheBaggerAttachment......................17

Storage...................................................................17

StoringtheBaggerAttachment.........................17

OriginalInstructions(EN)PrintedintheUSA

AllRightsReserved

*3437-298*A

Summary of content (20 pages)

PAGE 1
Form No. 3437-298 Rev A 60in Bagger Kit Zero Turn Radius Riding Mower Model No. 79413—Serial No. 400000000 and Up Operator's Manual Introduction g000502 Read this information carefully to learn how to operate and maintain your product properly and to avoid injury and product damage. You are responsible for operating the product properly and safely. Figure 2 Safety-alert symbol Visit www.Toro.
PAGE 2
Towing Safety Safety • Do not attach towed equipment except at the hitch • Become familiar with the safe operation of the point. equipment, with the operator controls, and safety signs. • Follow the attachment manufacturer's recommendation for weight limits for towed equipment and towing on slopes. • Use extra care with grass catchers or other attachments. These can change the operating characteristics and the stability of the machine. • Never allow children or others in or on towed equipment.
PAGE 3
Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. decal109-6809 109-6809 1. Crushing hazard of hand—do not remove the whole bagger from the machine; open the bagger top and then remove the bag(s) from the bagger. Do not remove the bagger top when it is closed; open the bagger top and then remove it. decal110-6691 110-6691 1.
PAGE 4
Setup Loose Parts Use the chart below to verify that all parts have been shipped. Procedure 1 2 3 4 5 6 7 8 Description Qty.
PAGE 5
1 Preparing the Machine No Parts Required Park the machine on a level surface. Disengage the blade-control switch. Move the motion-control levers outward to the NEUTRAL-LOCK position to engage the parking brake. Shut off the engine and remove the key. 4. Install the suitcase weights to the weight mounting brackets using 2 bolts (5/8 x 2-3/4 inches), 2 washers, and 2 locknuts (3/8 inch) as shown in Figure 4. 3.
PAGE 6
g299244 Figure 4 g300204 1. Spacer 3. Suitcase weights 2. Locknut (3/8 inch) 4. Bolts (5/8 x 2-3/4 inches) Figure 5 1. Carriage bolt (5/16 x 3/4 inch) 3 2. Installing the Attachment Mount 2. Locknut (5/16 inch) Install the pivot frame to the machine frame as shown in Figure 6. Secure the pivot frame to the machine frame using 2 bolts (5/16 x 1 inch) and 2 locknuts (5/16 inch). Note: Remove the hitch bracket and hardware if they are installed.
PAGE 7
4 Installing the Latch Rod Parts needed for this procedure: 1 Latch rod 1 Hairpin cotter Procedure Install the latch rod with a hairpin cotter (Figure 9). g300206 Figure 7 1. Self-tapping screw (5/16 x 3/4 inch) 4. Install the bent, flared end of a rod into the keyed slot in the left side of the machine frame, and move the rod rearward to seat it in the frame (Figure 8). Note: Repeat this step for the right side of the machine. g202360 Figure 9 1. Hairpin cotter g300207 Figure 8 5.
PAGE 8
5 Assembling the Bagger Top Parts needed for this procedure: 1 Bagger top 1 Bagger screen Procedure 1. Turn the bagger top over. 2. Install the screen as shown in Figure 10 and that it slopes down toward the collection bags. Note: Make sure that the screens snap into place and the tabs engage the bagger top. g005666 Figure 10 8 1. Bagger top 3. Screen tab 2. Screen 4.
PAGE 9
6 Installing the Bagger Top Parts needed for this procedure: 2 Grass bag 1 Upper bagger tube 2 Pivot bracket 4 Bolt (5/16 x 1 inch) 4 Nut (5/16 inch) g300378 Figure 12 Procedure 5. 1. Install the bagger top to the bagger frame. 2. Install the pivot brackets onto the pivot frame (Figure 8). 3. Secure the bagger top to the pivot brackets with 4 bolts (5/16 x 1 inch) and 4 nuts (5/16 inch). Lower the bagger top onto the bags (Figure 13).
PAGE 10
7 Installing the Baffles and Chute Parts needed for this procedure: 1 Bagging cutoff baffle 1 Front baffle 1 Locknut (5/16 inch) 1 Chute 2 Carriage bolt 1 Push nut 1 Hand knob g300211 Figure 15 3. Rotate the bagging cutoff baffle to contact the rear edge of the deck (Figure 16). Procedure Never operate the mower with the discharge opening uncovered. Always use a discharge cover, mulch cover, or bagging chute when operating the mower deck. 1.
PAGE 11
g300214 Figure 18 1. Carriage bolt 2. Nut g013098 Figure 20 6. Secure the chute to the mower deck with the hand knob (Figure 19). 1. Retaining clasp 2. Flexible latch 8 Connecting with the Discharge Tube Parts needed for this procedure: 1 Discharge tube Procedure 1. g300215 Figure 19 7. Hand tighten the knob to secure the chute to the mower deck (Figure 19). 8. Hook the flexible latch on the chute to the retaining clasp welded to the side wall of the mower deck (Figure 20).
PAGE 12
Operation WARNING To avoid personal injury, follow these procedures: • Become familiar with all operating and safety instructions in the Operator's Manual for the mower before using this attachment. • Never remove the discharge tube, bags, bagger top, or the chute while the engine is running. • Always shut the engine off and wait for all moving parts to stop before clearing an obstruction from the bagging system. • Never perform maintenance or make repairs while the engine is running. g010641 Figure 21 1.
PAGE 13
Emptying the Grass Bags DANGER Debris, such as leaves, grass, or brush can catch fire. A fire in the engine area can cause personal injury and property damage. • Keep the engine and muffler area free of debris accumulation. • Take care when opening the bagger cover to keep debris from falling onto the engine and muffler area. • Allow the machine to cool before storing it. Be careful when lifting or handling a grass bag that is full. To empty the grass bags: 1.
PAGE 14
Clearing Obstructions from the Bagger You can remove the bagger by repeating the Setup sections from all installed bagger related kits in reverse order. If weights are installed, always remove the front bagger weights when removing the bagger attachments. WARNING Note: It is necessary only to remove the cutoff baffle when installing a mulching kit. When the bagger is in operation, the blower is rotating and can cut off or injure hands and fingers.
PAGE 15
Operating Tips CAUTION As the bagger fills, extra weight is added to the back of the machine. If you stop and start suddenly on hills, you may lose steering control or the machine may tip. Tips for Bagging Remembering the Size of the Machine with the Attachment • Do not start or stop suddenly when going uphill or downhill. Avoid uphill starts. Remember that the machine is longer and wider with this attachment installed. By turning too sharply in confined places, you may damage the attachment.
PAGE 16
Maintenance Note: Determine the left and right sides of the machine from the normal operating position. CAUTION DANGER If you leave the key in the ignition switch, someone could accidently start the engine and seriously injure you or other bystanders. Leaves, grass, or brush can catch fire. A fire in the engine area can cause personal injury and property damage. Remove the key from the ignition and disconnect the wire from the spark plug before you do any maintenance.
PAGE 17
Inspecting the Mower Blades Storage Storing the Bagger Attachment Inspect the mower blades regularly and whenever a blade strikes a foreign object. If the blades are badly worn or damaged, install new blades. Refer to your mower or mower Operator's Manual for complete blade maintenance. Note: To prevent rapid deterioration of the bag material, store the bags where they will dry completely after each use. Cleaning the Bagger Attachment Service Interval: Before each use or daily 1.
PAGE 18
Notes:
PAGE 19
Notes:
PAGE 20
California Proposition 65 Warning Information What is this warning? You may see a product for sale that has a warning label like the following: WARNING: Cancer and Reproductive Harm—www.p65Warnings.ca.gov. What is Prop 65? Prop 65 applies to any company operating in California, selling products in California, or manufacturing products that may be sold in or brought into California.