Use and Care Manual

FormNo.3358-658RevA

RearHitchKit

forZero-Turn-RadiusRidingMowers

ModelNo.79318

InstallationInstructions

Safety

•Donotattachtowedequipmentexceptatthehitch

point.

•Followthemanufacturer’srecommendationfor

weightlimitsfortowedequipmentandtowingon

slopes.

•Neverallowchildrenorothersinorontowed

equipment.

•Onslopes,theweightofthetowedequipmentmay

causelossoftractionandlossofcontrol.

•Travelslowlyandallowextradistancetostop.

SafetyandInstructional

Decals

Safetydecalsandinstructionsareeasily

visibletotheoperatorandarelocated

nearanyareaofpotentialdanger.

Replaceanydecalthatisdamagedor

lost.

109-7076

PrintedintheUSA.OriginalInstructions(EN)

AllRightsReserved

PAGE 1
Form No. 3358-658 Rev A Rear Hitch Kit for Zero-Turn-Radius Riding Mowers Model No. 79318 Installation Instructions Safety • Do not attach towed equipment except at the hitch point. • Follow the manufacturer’s recommendation for weight limits for towed equipment and towing on slopes. Safety and Instructional Decals • Never allow children or others in or on towed equipment. • On slopes, the weight of the towed equipment may cause loss of traction and loss of control.
PAGE 2
Installation Loose Parts Use the chart below to verify that all parts have been shipped. Description Use Qty. Rear hitch Pin Cotter 1 1 1 Install the rear hitch. Decal 109-7076 1 Install the decal. Installing the Rear Hitch Installing the Decal 1. Thoroughly clean the area where you will install the decal. 1 2. Dampen the area with water or mildly soapy water. 3. Peel the decal from the backing and install it in place. 4.