Setup Instructions

FormNo.3448-248RevA
MBTX2500STrackedMudBuggy
ModelNo.68141—SerialNo.400000000andUp
ModelNo.68141G—SerialNo.400000000andUp
SetupInstructions
Setup
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Tensioningtool1Adjustthetracktension.
AdjustingtheTrackTension
Note:Checkandadjustthetensionpriortooperating
themachine.
1.Placethetabofthetensioningtoolalongthe
rearedgeofthetensionnut.Verifythattheother
endofthetensioningtoolalignswiththeedge
ofthetensionarm.Ifnecessary,continuethe
proceduretoadjustthetension.
g202806
Figure1
LeftTrackShown
1.Tensionnut
5.Spacer
2.Tensioningtool6.Nut
3.Tensioningbolt7.Tab
4.Bolt(1/4x1-5/8inch)
8.Tensionarm
2.Removethebolt(1/4x1-5/8inch),spacer,and
nut(Figure1).
3.Turnthetensioningbolttoadjustthetensionnut
untiltheedgesofthetensioningtoolalignwith
theedgesofthetensionnutandtensionarm
(Figure1)
4.Aligntheclosestnotchinthetensioningbolt
totheboltholeandsecurethetensioningbolt
withthebolt(1/4x1-5/8inch),spacer,andnut
(Figure1).
5.Repeattheprocedurefortheothertrack.
©2021—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3448-248*