Installation Instructions

FormNo.3444-216RevD

SteelTub

MaterialBuggies

ModelNo.68101—SerialNo.321000001andUp

InstallationInstructions

Safety

SafetyandInstructionalDecals

Safetydecalsandinstructionsareeasilyvisibletotheoperatorandarelocatednearanyarea

ofpotentialdanger.Replaceanydecalthatisdamagedormissing.

decal133-8061

133-8061

1.Parkthemachineonalevelsurface,engagetheparkingbrake,lowerthehopper,shutofftheengine,and

removethekey.

2.Removetheexistingtub;retainthehardware.

3.Securethenewtubtotheframeusingthepreviouslyremoved4bolts,4washers,and4nuts.

g347428

Figure1

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3444-216*

PAGE 1
Form No. 3444-216 Rev D Steel Tub Material Buggies Model No. 68101—Serial No. 321000001 and Up Installation Instructions Safety Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. decal133-8061 133-8061 1. Park the machine on a level surface, engage the parking brake, lower the hopper, shut off the engine, and remove the key. 2.
PAGE 2
WARNING Using a drill without proper eye protection may allow debris to enter the eye, causing injury. When drilling, always wear eye protection. 4. Using the new tub as a template, mark and drill 2 holes (9/16 inch). g322994 Figure 2 5. Install the remaining hardware to secure the tub to the frame. g322996 Figure 3 6. Torque the bolt to 37 to 45 N∙m (27 to 33 ft-lb).