Form No. 3426-188 Rev F Flex-Force Power System™ 60V MAX Axial Blower Model No. 51820—Serial No. 319000001 and Up Model No. 51820T—Serial No. 319000001 and Up Register at www.Toro.com.
Whenever you need service, genuine Toro parts, or additional information, contact an Authorized Service Dealer or Toro Customer Service and have the model and serial numbers of your product ready. Figure 1 identifies the location of the model and serial numbers on the product. Write the numbers in the space provided. For assistance, please see www.Toro.com/support for instructional videos or contact 1-888-384-9939 before returning this product.
Safety 8. WARNING—When using electric gardening appliances, always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury, including the following: 9. 10. IMPORTANT SAFETY INSTRUCTIONS I. Training 1. 11. The operator of the appliance is responsible for any accidents or hazards occurring to others or their property. 2.
Do not use the appliance while ill, tired, or under the influence of alcohol or drugs. 12. Ensure that the ventilation openings are kept clear of debris. 13. Do not insert any object into the opening or use the appliance with a blocked opening. Keep the opening free from dust, lint, hair, or anything else that could reduce the air flow. 14. 15. 16. 7. Keep all fasteners on the appliance tight. 8.
Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. decal137-9461 137-9461 1. Battery charge status decal137-9454 137-9454 1. Read the Operator’s Manual. 2. Call2Recycle® battery recycling program 3. Keep away from open fire or flames. 4. Do not expose to rain. decal137-9462 137-9462 decal137-9463 137-9463 1. The battery pack is charging. 2.
decal139-5207 139-5207 1. Warning—read the Operator’s Manual; stay away from moving parts; keep all guards in place; wear eye protection; do not expose to rain. 3. Thrown object hazard—keep bystanders away. 2. Warning—keep bystanders away from the machine in all directions.
Setup Loose Parts Use the chart below to verify that all parts have been shipped. Description Use Qty. Mounting hardware (not included) 2 Mount the battery charger (optional). Blower tube 1 Assemble the blower. Assembling the Blower Important: The battery pack is not fully charged when you purchase it. Before using the tool for the first time, refer to Charging the Battery Pack (page 11). Slide the blower tube onto the blower housing.
Specifications Product Overview Model 51820 Rated Voltage 60V DC maximum, 54 VDC nominal usage Charger Type 88602 (included with Model 51820), 88605, 88610 Battery Type 88625 (included with Model 51820), 88620, 88640, 88650, 88660, or 88675 Appropriate Temperature Ranges g355812 Charge/ store the battery pack at 5°C (41°F) to 40°C (104°F)* Use the battery pack at -30°C (-22°F) to 49°C (120°F) Use the blower at 0°C (32°F) to 49°C (120°F) Figure 5 1. Battery and battery cavity 5.
Operation WARNING The blower can throw debris, possibly causing serious personal injury to you or bystanders. • Do not blow hard objects, such as nails or bolts. • Do not operate the blower near bystanders or pets. • Be careful of blowing direction (i.e., blow away from bystanders, windows, automobiles, etc.). Only use as much speed as required. • Use extra care when cleaning debris from stairs or other tight areas.
Adjusting the Air Speed of the Blower To achieve maximum performance (air speed) , press and hold the turbo boost button for the desired amount of time (Figure 8). To adjust the air speed as you blow, use the variable-speed trigger (Figure 8). g267488 To maintain the current air speed, engage the speed lock (Figure 8). Figure 10 1. Battery latch Shutting Off the Blower To shut off the blower, disengage the speed lock (if in use) and release the variable-speed trigger (Figure 8).
Charging the Battery Pack Important: The battery pack is not fully charged when you purchase it. Before using the tool for the first time, place the battery pack in the charger and charge it until the LED display indicates the battery pack is fully charged. Read all safety precautions. button on the battery pack to display the current charge (LED indicators). Make sure that the vents on the battery and battery charger are clear of any dust and debris. g290533 Figure 11 5.
Preparing the Battery Pack for Recycling Storage Important: Store the tool, battery pack, and charger only in temperatures that are within the appropriate range; refer to Specifications (page 8). Important: Upon removal, cover the terminals of the battery pack with heavy-duty adhesive tape. Do not attempt to destroy or disassemble the battery pack or remove any of its components.
Troubleshooting Perform only the steps described in these instructions. All further inspection, maintenance, and repair work must be performed by an authorized service center or a similarly qualified specialist if you cannot solve the problem yourself. Problem The tool does not start. Possible Cause Corrective Action 1. The battery is not fully installed in the tool. 1. Remove and then replace the battery into the tool, making sure that it is fully installed and latched. 2.
Notes:
California Proposition 65 Warning Information What is this warning? You may see a product for sale that has a warning label like the following: WARNING: Cancer and Reproductive Harm—www.p65Warnings.ca.gov. What is Prop 65? Prop 65 applies to any company operating in California, selling products in California, or manufacturing products that may be sold in or brought into California.