Form No. 3442-125 Rev A Flex-Force Power System™ 60V MAX Axial Blower Model No. 51820—Serial No. 321000001 and Up Model No. 51820T—Serial No. 321000001 and Up Register at www.Toro.com.
Safety For assistance, please see www.Toro.com/support for instructional videos or contact 1-888-384-9939 before returning this product. WARNING—When using electric gardening appliances, always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury, including the following: IMPORTANT SAFETY INSTRUCTIONS WARNING I.
1 type of battery pack may create a risk of fire when used with another battery pack. 8. Charge the battery pack in a well-ventilated area only. 9. Do not expose a battery pack or battery charger to fire or to temperatures higher than 68°C (154°F). 10. Follow all charging instructions and do not charge the battery pack outside of the temperature range specified in the instructions. Otherwise, you may damage the battery pack and increase the risk of fire. 11.
9. Store an idle appliance indoors in a place that is dry, secure, and out of the reach of children. 6. Check the debris collector frequently for wear or deterioration and replace it when necessary. 7. Keep all fasteners on the appliance tight. 10. 8. Do not attempt to service or repair the appliance, battery pack, or battery charger except as indicated in the instructions.
decal137-9463 137-9463 1. The battery pack is charging. 2. The battery pack is fully charged. 3. The battery pack is over or under the appropriate temperature range. 4. Battery pack charging fault decal140-8496 decal140-8497 140-8496 1. Warning—read the Operator’s Manual; stay away from moving parts; keep all guards and shields in place; wear eye protection; do not expose to rain. 2. Warning—keep bystanders away from the machine in all directions. 140-8497 3. Thrown object hazard—keep bystanders away.
Setup Assembling the Blower Note: The battery pack is not fully charged when you Slide the blower tube onto the blower housing. You may need to press down on the tube latch for the blower tube to lock into place (Figure 2). purchase it. Before using the tool for the first time, refer to Charging the Battery Pack (page 10). Mounting the Battery Charger (Optional) If desired, mount the battery charger securely on a wall using the wall-mount key holes on the back of the charger. g273147 Figure 2 1.
Specifications Product Overview Model 51820, 51820T Rated Voltage 60V DC maximum, 54 VDC nominal usage Charger Type 88602 (included with Model 51820), 88605, 88610 Battery Type 88625 (included with Model 51820), 88620, 88640, 88660, or 88675 Appropriate Temperature Ranges g335835 Charge/ store the battery pack at 5°C (41°F) to 40°C (104°F)* Use the battery pack at -30°C (-22°F) to 49°C (120°F) Use the blower at 0°C (32°F) to 49°C (120°F) Figure 3 1. Battery and battery cavity 5.
Operation WARNING The blower can throw debris, possibly causing serious personal injury to you or bystanders. • Do not blow hard objects, such as nails or bolts. • Do not operate the blower near bystanders or pets. • Be careful of blowing direction (i.e., blow away from bystanders, windows, automobiles, etc.). Only use as much speed as required. g267241 Figure 6 • Use extra care when cleaning debris from stairs or other tight areas.
Adjusting the Air Speed of the Blower Removing the Battery from the Blower To achieve maximum performance (air speed) , press and hold the turbo boost button for the desired amount of time (Figure 6). Press down on the battery latch to separate the battery from the blower (Figure 8). To adjust the air speed as you blow, use the variable-speed trigger (Figure 6). To maintain the current air speed, engage the speed lock (Figure 6).
Charging the Battery Pack Important: The battery pack is not fully charged when you purchase it. Before using the tool for the first time, place the battery pack in the charger and charge it until the LED display indicates the battery pack is fully charged. Read all safety precautions. button on the battery pack to display the current charge (LED indicators). Make sure that the vents on the battery and battery charger are clear of any dust and debris. g290533 Figure 9 5.
Preparing the Battery Pack for Recycling Storage Important: Store the tool, battery pack, and charger only in temperatures that are within the appropriate range; refer to Specifications (page 7). Important: Upon removal, cover the terminals of the battery pack with heavy-duty adhesive tape. Do not attempt to destroy or disassemble the battery pack or remove any of its components.
Troubleshooting Perform only the steps described in these instructions. All further inspection, maintenance, and repair work must be performed by an authorized service center or a similarly qualified specialist if you cannot solve the problem yourself. Problem The tool does not start. Possible Cause Corrective Action 1. The battery is not fully installed in the tool. 1. Remove and then replace the battery into the tool, making sure that it is fully installed and latched. 2.
Notes:
Notes:
California Proposition 65 Warning Information What is this warning? You may see a product for sale that has a warning label like the following: WARNING: Cancer and Reproductive Harm—www.p65Warnings.ca.gov. What is Prop 65? Prop 65 applies to any company operating in California, selling products in California, or manufacturing products that may be sold in or brought into California.
