Form No. 3408-789 Rev D Power Plex™ 40V MAX Axial Blower Model No. 51134—Serial No. 317000001 and Up Model No. 51134T—Serial No. 317000001 and Up Register at www.Toro.com.
Safety WARNING: When using electric gardening appliances, always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury, including the following: Introduction This blower is intended to be used by residential homeowners to move leaf-like debris as needed. It is designed to use only battery pack Models 88525 (provided with Model 51134) or 88526. WARNING Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury.
from those intended could result in a hazardous situation. enables better control of the power tool in unexpected situations. E. F. 3. Dress properly. Do not wear loose clothing or jewelry. Keep your hair tied back and keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. I. 4. B. C. D. Keep your hands and feet away from the cutting area. 5. Do not force the power tool. Use the correct power tool for your application.
Sound Pressure This unit has a sound pressure level at the operator’s ear of 81.3 dBA, with an Uncertainty Value (K) of 3 dBA. The sound pressure level was determined according to the procedures outlined in EN ISO 11201. Sound Power This unit has a guaranteed sound power level of 96 dBA, which includes an Uncertainty Value (K) of 3 dBA. The sound power level was determined according to the procedures outlined in EN ISO 11094. Hand/Arm Vibration Measured vibration level for right hand = 3.
Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. decal136-2493 136-2493 1. Do not discard. decal136-2494 136-2494 decal136-2501 1. Do not discard. 136-2501 1. Do not discard. 2. Double insulated 3. Residential 4. Read the Operator’s Manual. decal136-2499 136-2499 1. Read the Operator’s Manual. 2. Do not burn the battery. 3.
decal136-2534 136-2534 1. The battery does not come out of the box fully charged. 4. Stop—follow these instructions before first use. 2. Place the battery in the battery charger. 5. Read the Operator’s Manual. decal136-2537 136-2537 1. Warning—read the Operator’s Manual; wear hearing protection; wear eye protection; do not operate in wet conditions. 3. Wait until the battery is fully charged before the first use. decal136-2539 136–2539 1.
Setup 2 Note: The battery pack is not fully charged when you purchase it. Before using the tool for the first time, refer to Charging the Battery Pack (page 9). Assembling the Blower 1 Parts needed for this procedure: 1 Mounting the Battery Charger (Optional) Blower tube Procedure 1. No Parts Required Slide the blower tube onto the blower housing. You may need to press down on the tab for the blower tube to lock into place (Figure 2).
Operation Product Overview Specifications WARNING The blower can throw debris, possibly causing serious personal injury to the operator or bystanders. Weights Mass of the machine without the battery 2.8 kg (6.2 lb) Mass of the machine with battery 88525 3.8 kg (8.4 lb) Mass of the machine with battery 88526 4.4 kg (9.7 lb) • Do not blow hard objects such as nails, bolts, or rocks. • Do not operate the blower near bystanders or pets.
Stopping the Blower Using the Attachments To stop the blower, disengage the speed lock (if in use) and release the variable-speed trigger (Figure 4). Use the provided attachments as needed. Note: The Gutter Cleaner Kit (Model 51667) is sold separately. Important: After stopping the blower, do not leave the speed lock engaged with the battery pack in the blower. Removing the Blower Tube Press down on the tab to separate the blower tube from the blower (Figure 5). g244381 Figure 7 1.
4. Make sure that the vents on the battery charger are clear of any dust and debris. • Clean all foreign material from the product. 5. Slide the battery pack into the charger until it is fully seated (Figure 9). battery charger out of the reach of children. • When not in use, store the tool, battery pack, and • Keep the tool, battery pack, and battery charger away from corrosive agents, such as garden chemicals and de-icing salts.
Troubleshooting Perform only the steps described in these instructions. All further inspection, maintenance, and repair work must be performed by an authorized service center or a similarly qualified specialist if you cannot solve the problem yourself. Problem Possible Cause Corrective Action The battery pack loses charge quickly. 1. The battery pack is over or under the appropriate temperature range. 1.
Notes:
Notes:
Notes:
European Privacy Notice The Information Toro Collects Toro Warranty Company (Toro) respects your privacy. In order to process your warranty claim and contact you in the event of a product recall, we ask you to share certain personal information with us, either directly or through your local Toro company or dealer. The Toro warranty system is hosted on servers located within the United States where privacy law may not provide the same protection as applies in your country.
Residential Products The Toro Warranty and The Toro GTS Starting Guarantee Instructions for Obtaining Warranty Service Conditions and Products Covered The Toro Company and its affiliate, Toro Warranty Company, pursuant to an agreement between them, jointly promise to repair the Toro Product listed below if defective in materials or workmanship or if the Toro GTS (Guaranteed to Start) engine will not start on the first or second pull, provided the routine maintenance required in the Operator's Manual have