Installation Instructions

ManualsBrandsToro ManualsTop DressersHose Assembly Kit, ProPass 200 Top Dresser with Tow-Type Chassis

FormNo.3365-523RevA

HoseAssemblyKit

Tow-TypeChassisforProPass-200TopDresser

ModelNo.44706

InstallationInstructions

Installation

1.Onmodel44701only,removethefastenerssecuring

thecovertothefrontoftheProPassandsetthe

coveraside(Figure1).

Figure1

1.Cover

2.Removetheplugsfromthettingsonthereturn

andpressureportsatthelocationsontheProPassas

showninFigure2ortheWirelessProPassasshown

Figure3.Retaintheplugsforfutureuse.

3.ConnectthehosestotheProPassasshownin

Figure2ortheWirelessProPassasshownin

Figure3.

Figure2

1.Pressurehose(45degree

tting)

2.Returnhose(90degree

tting)

Figure3

1.Pressurehose(45degree

tting)

2.Returnhose(90degree

tting)

4.Onmodel44701only,reinstallthecovertothefront

oftheProPass.

Important:Whenroutingthehydraulichoses

alwaysremembertoroutethemoutofthewayof

allmovingcomponentsandalwaysensurethat

thereisnostressontheline.Thismayrequire

looseningandrepositioningthehydraulichose

atthefrontbulkhead.

5.Looselymountthehoseguidetothehitchtubewith

a5/16x4inchbolt,washerandangenut(

Figure4).

Figure4

1.Hoseguide2.Hoses

6.Routethepressureandreturnhosesthroughthe

hoseguide(Figure4).

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA.

AllRightsReserved

Summary of content (2 pages)

PAGE 1
Form No. 3365-523 Rev A Hose Assembly Kit Tow-Type Chassis for ProPass-200 Top Dresser Model No. 44706 Installation Instructions Installation 1. On model 44701 only, remove the fasteners securing the cover to the front of the ProPass and set the cover aside (Figure 1). Figure 3 1. Pressure hose (45 degree fitting) 4. On model 44701 only, reinstall the cover to the front of the ProPass. Figure 1 1. Cover 2.
PAGE 2
7. Tighten the hose guide mounting fastener. 8. Connect the pressure and return hoses into the proper hydraulic couplers at the rear of the Workman (Figure 5). Figure 5 1. Return hose 2. Pressure hose Note: Ensure that the pressure and return hoses are attached to the rear of the Workman and do not come in contact with the option.