Installation Instructions

FormNo.3362-589RevA

315MHzCerticationKit

ProForceDebrisBlower

ModelNo.44541

InstallationInstructions

Installation

Note:Coversmodels:115–9590and115–9591

RemovetheExisting

Controller

1.Disconnectthepositivebatterycablefromthe

blowerbattery.

2.Unplugthecablesfromthecontroller(Figure1).

3.Removethe(3)screwssecuringthecontrollertothe

frontofblowerframe(Figure1).

4.Removethecontrollerfromtheframe.Retainthe

mountingscrews.

Figure1

1.Controller3.Screws

2.Cables

InstalltheNewController

1.Mountthenewcontrollertothefrontoftheblower

framewiththe(3)screwspreviouslyremoved.

2.Plugthecablesintothecontroller.

3.Connectthepositivebatterycabletotheblower

battery.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA.

AllRightsReserved

PAGE 1
Form No. 3362-589 Rev A 315MHz Certification Kit ProForce Debris Blower Model No. 44541 Installation Instructions Installation Note: Covers models: 115–9590 and 115–9591 Remove the Existing Controller 1. Disconnect the positive battery cable from the blower battery. 2. Unplug the cables from the controller (Figure 1). 3. Remove the (3) screws securing the controller to the front of blower frame (Figure 1). 4. Remove the controller from the frame. Retain the mounting screws. Figure 1 1. Controller 2.