MODEL NO. 41570-20101 & UP FORM NO.
safety tips = Turn power off before servicing BEFORE SERVICING OR ADJUSTING MACHINE: * Disengage all power. * shut off the engine. . ®uWsit until all moving parts nave STOPPED. Keep hands, feet and clothing away from all power-driven parts. Read instructions on chemical container thoroughly. Never exceed maximum goad of 3500 lbs. Make certain everyone is clear before stating machine or moving vehicle. operation The Directional Control Valve is the ON/QFF control for the Top Dresser.
maintenance AFTER EVERY 10 HOURS OF OPERATION: Grease idler bearings on idler shaft makeup assembly, outboard bearing on gearbox output shaft and lower spinner bearing. AFTER EVERY 50 HOURS OF OPERATION: Grease input shaft bearing on gearbox. CAUTION] Over greasing may cause sea] damage. The gearbox must be filled to 011 Revel plug with SAE 90 gear lubricant. Keep breather plug clean: When the Spreader !s not in use , it should be washed out.
BU LYY AR WP The Turn Promise A ONE YEAR Limited WARRANTY Y VYA The Torah Company promises to repair your TOR Product if defective in materials or workmanship. The following time periods from the date of purchase apply: Commercial Products .