Reference Guide

ManualsBrandsToro ManualsLog SplitterToro 22618HD

Revision 1 02-24-2021 Toro Form No 3445-721 Rev A

Tool Inspection Process

Perform the necessary maintenance procedures as specified in the following table (for complete procedures, refer to the Operator’s Manual):

Maintenance Service Interval Maintenance Procedure

After the first hour Check the wheel lug nuts.

After the first 10 hours Check the wheel lug nuts.

After the first 20 hours Change the engine oil.

Before each use or daily • Inspect the air-cleaner elements.

• Check the engine-oil level.

• Check the tire pressure

• Check the hydraulic-fluid level.

Every 50 hours Clean the air-cleaner elements (more often in extremely dusty or sandy conditions).

Every 100 hours • Change the engine oil (more often in extremely dusty or sandy conditions).

• Check the spark plug.

Tool Rental Center

Tool Turn Guide

Log Splitter

Model No. 22618HD—400000000 and Up

Supplier Technical Support #:

800-888-9926 (US and Canada)

Supplier Website: www.Toro.com

PURPOSE

Follow the directions below to maintain this tool.

SAFETY

Refer to the product Operator’s Manual for complete safety information.

Summary of content (4 pages)

PAGE 1
Tool Turn Guide Tool Rental Center PURPOSE Log Splitter Model No. 22618HD—400000000 and Up Supplier Technical Support #: 800-888-9926 (US and Canada) Supplier Website: www.Toro.com Follow the directions below to maintain this tool. SAFETY Refer to the product Operator’s Manual for complete safety information.
PAGE 2
Maintenance Service Interval Maintenance Procedure • Clean the fuel-sediment cup. • Replace the hydraulic filter. • Replace the hydraulic fluid. Every 300 hours • Replace the paper air-cleaner element (more often in extremely dusty or sandy conditions). • Replace the spark plug. Every 500 hours Grease the wheel bearings. Yearly or before storage • Change the engine oil. • Clean the fuel-sediment cup. Important: Refer to your engine owner’s manual for additional maintenance procedures.
PAGE 3
Spring Maintenance Tool Rental Center PURPOSE Guide Log Splitter Model No. 22618HD—400000000 and Up Supplier Technical Support #: 800-888-9926 (US and Canada) Supplier Website: www.Toro.com Follow the directions below to maintain this tool. SAFETY Refer to the product Operator’s Manual for complete safety information.
PAGE 4
Recommended Parts Action Part Number Description Check for missing or damaged parts, especially safety devices, shields, guards, and decals; ensure that the machine starts and operates properly. Check the ball hitch operation. Check the safety chains. Check for hydraulic leaks. Recommended Routine Maintenance: Recommended Parts Action Part Number Description Replace the air filter. Source from Honda Air filter Replace the spark plug.