Form No. 3442-187 Rev C Flex-Force Power System™ 60V MAX 21in Recycler® Lawn Mower 20367 and 20367T Cortacésped Recycler® 60V MAX de 53 cm (21") con Flex-Force Power System™ 20367 and 20367T Tondeuse Recycler® 60 V MAX 53 cm (21 po) avec Flex-Force Power System™ 20367 and 20367T www.Toro.com.
Form No. 3442-184 Rev C Flex-Force Power System™ 60V MAX 21in Recycler® Lawn Mower Model No. 20367—Serial No. 407300000 and Up Model No. 20367T—Serial No. 407300000 and Up Register at www.Toro.com.
Whenever you need service, genuine the manufacturer parts, or additional information, contact an Authorized Service Dealer or the manufacturer Customer Service and have the model and serial numbers of your product ready. Figure 1 identifies the location of the model and serial numbers on the product. Write the numbers in the space provided. For assistance, please see www.Toro.com/support for instructional videos or contact 1-888-384-9939 before returning this product.
Contents Safety Safety ....................................................................... 3 Safety and Instructional Decals .......................... 6 Setup ........................................................................ 9 1 Mounting the Battery Charger (Optional) ........................................................ 9 2 Assembling the Grass Bag............................... 9 3 Unfolding the Handle ..................................... 10 Product Overview .............................
7. Do not use a damaged or modified battery pack or battery charger, which may exhibit unpredictable behavior that results in fire, explosion, or risk of injury. 8. If the supply cord to the battery charger is damaged, contact an Authorized Service Dealer to replace it. 9. Do not use non-rechargeable batteries. 10. 11. Charge the battery pack with only the battery charger specified by Toro. A charger suitable for 1 type of battery pack may create a risk of fire when used with another battery pack.
medical help. Liquid ejected from the battery pack may cause irritation or burns. 13. When you are not using the machine, store it indoors in a dry, secure place out of the reach of children. 14. CAUTION—A mistreated battery pack may present a risk of fire or chemical burn. Do not disassemble the battery pack. Do not heat the battery pack above 68°C (154°F) or incinerate it. Replace the battery pack with a genuine Toro battery pack only; using another type of battery pack may cause a fire or explosion.
Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. Model 88640 decal140-3811 140-3811 1. Warning—read the Operator's Manual. 2. Thrown object hazard—keep bystanders away. 4. Cutting/dismember hazard, mower blade—stay away from moving parts; keep all guards and shields in place. decal140-2155 140-2155 1. Read the Operator’s Manual. 5.
decal137-9463 137-9463 1. The battery pack is charging. 2. The battery pack is fully charged. 3. The battery pack is over or under the appropriate temperature range. 4. Battery pack charging fault decal94-8072 94-8072 decal137-9461 137-9461 1.
decal144-3175 144-3175 1. Read the Operator’s Manual. 2. To start the machine, squeeze the bar to the handle and press the button. 3. To shut off the machine, release the bar.
Setup Important: The battery pack is not fully charged when it is purchased. Before using the machine for the first time, refer to Charging the Battery Pack (page 16). 1 2 Mounting the Battery Charger (Optional) Assembling the Grass Bag No Parts Required Parts needed for this procedure: 2 Procedure Mounting hardware (not included) Procedure If desired, mount the battery charger securely on a wall using the wall-mount key holes on the back of the charger.
3 Unfolding the Handle No Parts Required Procedure WARNING Unfolding the handle improperly can damage the cables, causing an unsafe operating condition. • Do not damage the cable(s) when folding or unfolding the handle. • Ensure that the cable(s) are routed to the outside of the handle. • If a cable is damaged, contact an Authorized Service Dealer. Important: Remove and discard the protective plastic sheet that covers the motor and any other plastic or wrapping on the machine. 1.
Specifications Product Overview Battery Pack Model 88640 4.0 Ah Battery pack capacity 216 Wh Battery manufacturer rating = 60V maximum and 54V nominal. Actual voltage varies with load. Battery Charger Model 88602 Type 60V MAX Lithium-Ion Battery Charger Input 120V AC 50/60Hz Max 2.0A Output 60V MAX DC 2.
Operation Before Operation Installing the Battery Pack Important: Use the battery pack only in temperatures that are within the appropriate range; refer to Specifications (page 11). 1. Make sure that the vents on the battery are clear of any dust and debris. 2. Lift up the battery-compartment lid (A of Figure 8). 3. Line up the cavity in the battery pack with the tongue on the machine and slide the battery pack into the compartment until it locks into place (B of Figure 8). 4.
Adjusting the Cutting Height WARNING Adjusting the height-of-cut could bring your hands into contact with a moving blade and result in serious injury. • Shut off the motor, remove the battery, and wait for all moving parts to stop before adjusting the cutting height. • Do not put your fingers under the housing when adjusting the cutting height. Adjust the cutting height as desired. Set all wheels to the same cutting height (Figure 9).
During Operation Starting the Machine 1. Ensure that the battery pack is charged and installed in the machine; refer to Installing the Battery Pack (page 12). 2. Insert the electric-start button into the electric starter switch (A of Figure 10). 3. Squeeze the blade-control bar and hold it to the handle (B of Figure 10). 4. Press the electric-start button and keep it pressed until the motor starts (C of Figure 10).
Shutting Off the Machine 1. 2. 3. • Do not cut below 51 mm (2 inches) unless the grass is sparse or it is late fall when grass growth begins to slow down. Release the blade-control bar (A of Figure 12). Remove the electric-start button from the electric starter (B of Figure 12). Remove the battery pack; refer to Removing the Battery Pack from the Machine (page 15).
After Operation Charging the Battery Pack Important: The battery pack is not fully charged when you purchase it. Before using the tool for the first time, place the battery pack in the charger and charge it until the LED display indicates the battery pack is fully charged. Read all safety precautions. Note: At any time, press the battery-charge-indicator button on the battery pack to display the current charge (LED indicators).
Cleaning under the Machine Folding the Handle Service Interval: After each use WARNING Folding or unfolding the handle improperly can damage the cables, causing an unsafe operating condition. Cleaning under the Machine For best results, clean under the machine soon after you have completed mowing. 1. Lower the machine to its lowest cutting-height setting. 2. Move the machine onto a paved level surface. 3.
Storing the Machine in the Vertical-Stow Position You can store your machine in the vertical position to minimize storage space. WARNING Folding or unfolding the handle improperly can damage the cables, causing an unsafe operating condition. • Do not damage the cables when folding or unfolding the handle. • If a cable is damaged, contact an Authorized Service Dealer. 1. Remove the electric-start button and battery from the machine. 2.
Maintenance Remove the electric-start button and battery pack from the machine before maintaining or cleaning the machine. Always shut off the machine, wait for all moving parts to stop, and allow the machine to cool before adjusting, servicing, cleaning, or storing it. Use only the manufacturer’s recommended replacement parts and accessories. Inspect and maintain the machine regularly. Have the machine repaired only by an Authorized Service Dealer. g231389 Figure 18 Lubricating the Machine 4.
Preparing the Battery Pack for Recycling Storage Important: Upon removal, cover the terminals of charger only in temperatures that are within the appropriate range; refer to Specifications (page 11). Important: Store the machine, battery pack, and the battery pack with heavy-duty adhesive tape. Do not attempt to destroy or disassemble the battery pack or remove any of its components.
Troubleshooting Perform only the steps described in these instructions. All further inspection, maintenance, and repair work must be performed by an authorized service center or a similarly qualified specialist if you cannot solve the problem yourself. Problem The machine does not start. Possible Cause Corrective Action 1. The battery is not fully installed in the machine. 1. Remove and then replace the battery into the machine, making sure that it is fully installed and latched. 2.
Problem The machine is producing a beeping sound. Possible Cause Corrective Action 1. The battery pack is not charged. 1. Remove the battery pack from the machine and charge it. 2. The machine is in an unsafe position for operation. 3. The machine is overloaded. 2. Ensure that the machine is not at an extreme angle while operating. 3. Cut the grass at a higher height of cut or walk at a slower pace while mowing. 4.
California Proposition 65 Warning Information What is this warning? You may see a product for sale that has a warning label like the following: WARNING: Cancer and Reproductive Harm—www.p65Warnings.ca.gov. What is Prop 65? Prop 65 applies to any company operating in California, selling products in California, or manufacturing products that may be sold in or brought into California.
Form No. 3442-185 Rev C Cortacésped Recycler® 60V MAX de 53 cm (21") con Flex-Force Power System™ Nº de modelo 20367—Nº de serie 407300000 y superiores Nº de modelo 20367T—Nº de serie 407300000 y superiores Registre su producto en www.Toro.com.
formación, información sobre accesorios, para localizar un distribuidor o para registrar su producto. Si necesita ayuda, consulte los vídeos instruccionales en www.Toro.com/support o llame al 1-888-384-9939 antes de devolver este producto. Si necesita asistencia técnica, piezas genuinas del fabricante o información adicional, póngase en contacto con un Servicio Técnico Autorizado o con el Servicio de atención al cliente del fabricante y tenga a mano el número de serie y de modelo del producto.
Contenido Seguridad Seguridad ................................................................. 3 Pegatinas de seguridad e instrucciones ............. 6 Montaje ..................................................................... 9 1 Cómo montar el cargador de la batería (opcional) ........................................................ 9 2 Ensamblaje de la bolsa de recogida ................. 9 3 Cómo desplegar el manillar............................ 10 El producto ......................................
6. 7. 8. 9. 10. 11. 12. 13. 14. Si se enchufa el cargador en una toma de corriente que no sea de 120 voltios, puede causar un incendio o una descarga eléctrica. No conecte el cargador de la batería a una toma de corriente que no sea de 120 voltios. Para otros tipos de conexión, utilice un adaptador de enchufe del tipo correcto para la toma de corriente, si es necesario.
18. los protectores colocados y en buen estado de funcionamiento. Mantenga las cuchillas afiladas. Utilice únicamente cuchillas de repuesto idénticas. Si la máquina golpea un objeto o empieza a vibrar, apague inmediatamente la máquina, retire el botón de arranque eléctrico, retire la batería y espere a que se detenga todo movimiento antes de examinar la máquina en busca de daños. Haga todas las reparaciones necesarias antes de volver a utilizar la máquina. 19.
Pegatinas de seguridad e instrucciones Las pegatinas de seguridad e instrucciones están a la vista del operador y están ubicadas cerca de cualquier zona de peligro potencial. Sustituya cualquier pegatina que esté dañada o que falte. Modelo 88640 decal140-3811 140-3811 1. Advertencia – lea el Manual del operador. 2. Peligro de objetos arrojados – mantenga alejadas a otras personas. 4.
decal137-9462 137-9462 decal137-9463 137-9463 1. La batería se está cargando. 2. La batería está completamente cargada. 3. La temperatura de la batería está por encima o por debajo del intervalo de temperatura adecuado. 4. Fallo de carga de la batería decal94-8072 94-8072 decal137-9461 137-9461 1.
decal144-3175 144-3175 1. Lea el Manual del operador. 3. Para apagar la máquina, suelte la barra. 2. Para arrancar la máquina, apriete la barra contra el manillar y pulse el botón.
Montaje Importante: En el momento de la compra la batería no está totalmente cargada. Antes de utilizar la máquina por primera vez, consulte Carga de la batería (página 16).
3 Cómo desplegar el manillar No se necesitan piezas Procedimiento ADVERTENCIA Si despliega el manillar de forma incorrecta, pueden dañarse los cables, creando condiciones de operación inseguras. • No dañe el/los cable(s) al plegar o desplegar el manillar. • Asegúrese de colocar el/los cable(s) en el exterior del manillar. • Si un cable está dañado, póngase en contacto con el Servicio Técnico Autorizado.
El producto Especificaciones Batería Modelo 88640 Capacidad de la batería 4.0 Ah 216 Wh Voltaje según el fabricante de la batería = 60 V máximo y 54 V nominal. El voltaje real depende de la carga. Cargador de baterías Modelo 88602 Tipo Cargador de baterías de iones de litio 60 V MAX Entrada 120 Vca 50/60 Hz Máx. 2.0 A Salida 60 V MÁX CC 2.0 A Intervalos de temperatura adecuados g296936 Figura 6 1. Barra de control de las cuchillas 2. Botón de arranque eléctrico 3.
Operación Antes del funcionamiento Instalación de la batería Importante: Utilice la batería solo a temperaturas que estén dentro del intervalo apropiado; consulte Especificaciones (página 11). 1. Compruebe que los orificios de ventilación de la batería están libres de polvo y residuos. 2. Levante la tapa del compartimento de la batería (Figura 8, A). 3.
Ajuste de la altura de corte ADVERTENCIA Al ajustar la altura de corte, podría tocar una cuchilla en movimiento con las manos, lo que podría causarle graves lesiones. • Apague el motor, retire la batería, y espere a que se detengan todas las piezas en movimiento antes de ajustar la altura de corte. • No ponga los dedos debajo de la carcasa al ajustar la altura de corte. Ajuste la altura de corte según desee. Ajuste las cuatro ruedas a la misma altura de corte (Figura 9).
Durante el funcionamiento Cómo arrancar la máquina 1. Asegúrese de que la batería está cargada e instalada en la máquina; consulte Instalación de la batería (página 12). 2. Introduzca el botón de arranque eléctrico en el interruptor de arranque eléctrico (Figura 10, A). 3. Apriete la barra de control de la cuchilla contra el manillar (Figura 10, B). 4. Pulse el botón de arranque eléctrico y manténgalo pulsado hasta que el motor arranque (Figura 10, C).
Cómo retirar la bolsa de recogida Para retirar la bolsa, siga los pasos de Instalación de la bolsa de recogida (página 14) en sentido inverso. Apagado de la máquina 1. 2. 3. Cómo cortar la hierba Suelte la barra de control de la cuchilla (Figura 12, A). Retire el botón de arranque eléctrico del arrancador eléctrico (Figura 12, B). Retire la batería; consulte Cómo retirar la batería de la máquina (página 15). • Corte solamente un tercio de la hoja de hierba cada vez.
Después del funcionamiento Indicador Indica: Apagada No hay batería insertada La batería se está cargando Carga de la batería Verde intermitente Importante: En el momento de la compra la Verde La batería está cargada batería no está totalmente cargada. Antes de usar la herramienta por primera vez, coloque la batería en el cargador y cárguela hasta que el indicador LED indique que la batería está completamente cargada. Lea todas las precauciones de seguridad.
Limpieza de los bajos de la máquina Cómo plegar el manillar ADVERTENCIA Intervalo de mantenimiento: Después de cada uso Si pliega o despliega el manillar de forma incorrecta, pueden dañarse los cables, creando condiciones de operación inseguras. Limpieza de los bajos de la máquina • No dañe los cables al plegar o desplegar el manillar. Para obtener resultados óptimos, limpie debajo de la máquina inmediatamente después de haber terminado la siega. 1. Baje la máquina a la altura de corte más baja. 2.
Almacenamiento de la máquina en posición vertical Puede almacenar la máquina en posición vertical para aprovechar al máximo el espacio de almacenamiento. ADVERTENCIA g297023 Figura 17 Si pliega o despliega el manillar de forma incorrecta, pueden dañarse los cables, creando condiciones de operación inseguras. • No dañe los cables al plegar o desplegar el manillar. • Si un cable está dañado, póngase en contacto con el Servicio Técnico Autorizado. 1.
Mantenimiento Retire el botón de arranque eléctrico y la batería de la máquina antes de realizar tareas de mantenimiento o limpieza en la máquina. Siempre apague la máquina, espere a que se detengan todas las piezas en movimiento, y deje que la máquina se enfríe antes de hacer trabajos de ajuste, revisión, limpieza o almacenamiento. Utilice únicamente piezas de repuesto y accesorios recomendados por el fabricante. Inspeccione y revise la máquina de forma regular.
Preparación de la batería para el reciclado Almacenamiento Importante: Después de retirarla, cubra los cargador solo a temperaturas que estén dentro del intervalo apropiado; consulte Especificaciones (página 11). Importante: Almacene la máquina, la batería y el terminales de la batería con cinta adhesiva de servicio pesado. No intente destruir o desmontar la batería ni intente retirar cualquiera de los componentes de la misma.
Solución de problemas Realice solo los pasos descritos en estas instrucciones. Cualquier otro trabajo de inspección, mantenimiento o reparación debe ser realizado por un Servicio Técnico Autorizado o por un especialista autorizado si no puede solucionar el problema usted mismo. Problema La máquina no arranca. La máquina no funciona o no funciona de forma continua. La máquina no alcanza la máxima potencia. La batería se descarga rápidamente. El cargador de la batería no funciona.
Problema El indicador LED del cargador de la batería parpadea en rojo. La máquina produce pitidos. Posible causa Acción correctora 1. Hay un error de comunicaciones entre la batería y el cargador. 1. Retire la batería del cargador, desconecte el cargador de la toma de corriente y espere 10 segundos. Vuelva a enchufar el cargador en la toma de corriente y coloque la batería en el cargador. Si el indicador LED del cargador sigue parpadeando en rojo, repita este procedimiento.
Información sobre las Advertencias de la Proposición 65 de California ¿Qué significa esta advertencia? Puede ver un producto a la venta que lleva una etiqueta de advertencia como la siguiente: ADVERTENCIA: Cáncer y daños reproductivos – www.p65Warnings.ca.gov. ¿Qué es la Proposición 65? La Proposición 65 afecta a cualquier empresa que tenga presencia en California, que venda productos en California, o que fabrique productos que podrían ser introducidos o vendidos en California.
Form No. 3442-186 Rev C Tondeuse Recycler® 60 V MAX 53 cm (21 po) avec Flex-Force Power System™ N° de modèle 20367—N° de série 407300000 et suivants N° de modèle 20367T—N° de série 407300000 et suivants Enregistrez votre produit à www.Toro.com.
Lisez attentivement cette notice pour apprendre comment utiliser et entretenir correctement votre produit, et éviter ainsi de l'endommager ou de vous blesser. Vous êtes responsable de l'utilisation sûre et correcte du produit. Si vous avez besoin d'aide, visionnez les vidéos d'instruction sur www.Toro.com/support ou appelez le 1-888-384-9939 avant de renvoyer ce produit.
Table des matières information d'ordre général méritant une attention particulière. Sécurité .................................................................... 4 Autocollants de sécurité et d'instruction .............. 7 Mise en service ....................................................... 10 1 Montage du chargeur de batterie (option).......................................................... 10 2 Montage du bac à herbe ................................ 10 3 Dépliage de la poignée ......................
Sécurité batterie à une prise qui n'est pas de 120 V. Ne branchez pas le chargeur de batterie à une prise autre que 120 V. Pour un autre mode de connexion, vous pouvez, au besoin, utiliser un adaptateur configuré correctement pour la prise. IMPORTANTES CONSIGNES DE SÉCURITÉ ATTENTION – quand vous utilisez une machine électrique, lisez et respectez toujours les mises en garde et consignes de sécurité élémentaires pour réduire les risques d'incendie, de choc électrique ou de blessure, notamment : 7.
5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Évitez les démarrages accidentels – vérifiez que le bouton de démarrage électrique est retiré du démarreur électrique avant de brancher la batterie et de manipuler la machine. Accordez toute votre attention à l'utilisation de la machine. Ne vous livrez à aucune activité risquant de vous distraire, au risque de causer des dommages corporels ou matériels.
9. Maintenez la machine en bon état – pour obtenir des performances optimales et sûres, conservez le tranchant des lames bien affûté et propre. Gardez les poignées sèches et propres, et exemptes d'huile et de graisse. Gardez toujours les protections en place et en bon état. Maintenez les lames bien aiguisées. Utilisez uniquement des lames de rechange identiques. 10.
Autocollants de sécurité et d'instruction Des autocollants de sécurité et des instructions bien visibles par l'opérateur sont placés près de tous les endroits potentiellement dangereux. Remplacez tout autocollant endommagé ou manquant. Modèle 88640 decal140-3811 140-3811 1. Attention – lisez le Manuel de l'utilisateur. 2. Risque de projection d'objets – n'autorisez personne à s'approcher de la machine. 4.
decal137-9463 137-9463 1. La batterie est en charge. 2. La batterie est complètement chargée. 3. La température de la batterie est supérieure ou inférieure à la plage de température appropriée. 4. Anomalie de charge de la batterie decal94-8072 94-8072 decal137-9461 137-9461 1.
decal144-3175 144-3175 1. Lisez le Manuel de l'utilisateur. 2. Pour démarrer le moteur, serrez la barre contre le guidon et appuyez sur le bouton d'allumage. 3. Relâchez la barre pour arrêter la machine.
Mise en service Important: La batterie n'est pas complètement chargée à l'achat. Avant la toute première utilisation de la machine, voir Charge de la batterie (page 17). 1 2 Montage du chargeur de batterie (option) Montage du bac à herbe Aucune pièce requise Pièces nécessaires pour cette opération: 2 Procédure Fixations de montage (non incluses) Procédure Si vous le souhaitez, vous pouvez fixer le chargeur de batterie sur un mur à l'aide des fentes en trou de serrure situées au dos.
3 Dépliage de la poignée Aucune pièce requise Procédure ATTENTION Vous risquez d'endommager les câbles et de rendre l'utilisation de la machine dangereuse si vous ne dépliez pas le guidon correctement. • Veillez à ne pas endommager le(s) câble(s) en pliant ou dépliant le guidon. • Vérifiez que le(s) câble(s) passe(nt) bien à l'extérieur du guidon. • Si un câble est endommagé, adressez-vous à un dépositaire-réparateur agréé.
Vue d'ensemble du produit Caractéristiques techniques Batterie 88640 Modèle Capacité de la batterie 4,0 Ah 216 Wh Tension batterie nominale selon le fabricant = 60V max., 54V nominale. La tension réelle varie en fonction de la charge. Chargeur de batterie Modèle 88602 Type Chargeur de batterie ion-lithium de 60 V MAX Entrée 120 V CA 50/60 Hz 2 A max.
Utilisation Avant l'utilisation Installation de la batterie Important: Utilisez la batterie uniquement à des températures comprises dans la plage adéquate; voir Caractéristiques techniques (page 12). 1. Vérifiez que les évents sur la batterie sont exempts de poussière et de débris. 2. Soulevez le couvercle du compartiment de la batterie (A de la Figure 8). 3.
Réglage de la hauteur de coupe ATTENTION Lors du réglage de la hauteur de coupe, vous risquez de vous blesser gravement si vos mains touchent une lame en mouvement. • Coupez le moteur, retirez la batterie et attendez l'arrêt complet de toutes les pièces mobiles avant de régler la hauteur de coupe. • Ne mettez pas les doigts sous le carter du tablier de coupe quand vous réglez la hauteur de coupe. Choisissez la hauteur de coupe voulue. Réglez toutes les roues à la même hauteur de coupe (Figure 9).
Pendant l'utilisation Démarrage de la machine 1. 2. 3. 4. Vérifiez que la batterie est chargée et installée dans la machine; voir Installation de la batterie (page 13). Insérez le bouton de démarrage électrique dans l'interrupteur du démarreur électrique (A de la Figure 10). Serrez et maintenez la barre de commande de la lame contre le guidon (B de la Figure 10). Maintenez le bouton de démarrage électrique enfoncé jusqu’à ce que le moteur démarre (C de la Figure 10).
La tonte Arrêter la machine 1. Relâchez la barre de commande de la lame (A de la Figure 12). 2. Retirez le bouton de démarrage électrique du démarreur électrique (B de la Figure 12). 3. Enlevez la batterie; voir Retrait de la batterie de la machine (page 16). • Ne tondez l'herbe que sur un tiers de sa hauteur à chaque fois. Pour une meilleure qualité de coupe, une plus grande autonomie et de meilleurs résultats de ramassage, tondez l'herbe à une hauteur de coupe plus élevée.
Après l'utilisation Voyant Indication Éteint Pas de batterie présente Charge de la batterie Clignotement vert Batterie en charge Important: La batterie n'est pas complètement chargée à l'achat. Avant d'utiliser l'outil pour la première fois, placez la batterie dans le chargeur et chargez-la jusqu'à ce que les diodes indiquent que la batterie est complètement chargée. Lisez toutes les consignes de sécurité.
Pliage du guidon Nettoyage du dessous de la machine ATTENTION Périodicité des entretiens: Après chaque utilisation Nettoyage du dessous de la machine Vous risquez d'endommager les câbles et de rendre l'utilisation de la machine dangereuse si vous ne pliez ou ne dépliez pas le guidon correctement. Pour obtenir des résultats optimaux, nettoyez rapidement le dessous de la machine après la tonte. • Veillez à ne pas endommager les câbles en pliant ou dépliant le guidon. 1.
Remisage de la machine en position verticale Vous pouvez ranger votre machine en position verticale pour minimiser l'encombrement. ATTENTION Vous risquez d'endommager les câbles et de rendre l'utilisation de la machine dangereuse si vous ne pliez ou ne dépliez pas le guidon correctement. g297023 Figure 17 • Veillez à ne pas endommager les câbles en pliant ou dépliant le guidon. • Si un câble est endommagé, adressez-vous à un dépositaire-réparateur agréé. 1.
Entretien Enlevez le bouton de démarrage électrique et la batterie de la machine avant d'en faire l'entretien ou de la nettoyer. Coupez toujours le moteur, attendez l'arrêt complet de toutes les pièces en mouvement et faites refroidir la machine avant de la régler, de la réparer, de la nettoyer ou de la remiser. Utilisez uniquement les pièces et accessoires de rechange recommandés par le constructeur. Inspectez et faites l'entretien de la machine régulièrement.
Remisage Préparation de la batterie pour le recyclage Important: Remisez la machine, la batterie et le chargeur uniquement à des températures comprises dans la plage adéquate; voir Caractéristiques techniques (page 12). Important: Après avoir retiré la batterie, recouvrez les bornes de ruban adhésif épais. N'essayez pas de détruire ou de démonter la batterie ni de déposer aucun de ses composants.
Dépistage des défauts Effectuez uniquement les opérations décrites dans ces instructions. Tout autre contrôle, entretien ou réparation doit être réalisé par un centre d'entretien agréé ou un spécialiste qualifié si vous n'arrivez pas à résoudre le problème vous-même. Problème La machine ne démarre pas. Cause possible Mesure corrective 1. La batterie n'est pas complètement installée dans la machine. 1.
Problème La machine émet un bip sonore. Cause possible Mesure corrective 1. La batterie n'est pas chargée. 1. Retirez la batterie de la machine et chargez-la. 2. La machine est dans une position d’utilisation dangereuse. 2. Assurez-vous que l'angle de fonctionnement de la machine n'est pas trop extrême. 3. Augmentez la hauteur de coupe ou tondez en avançant plus lentement. 4. Essayez les autres opérations de dépannage et si l’alarme sonore persiste, contactez un dépositaire-réparateur agréé. 3.
Proposition 65 de Californie – Information concernant cet avertissement En quoi consiste cet avertissement? Certains produits commercialisés présentent une étiquette d'avertissement semblable à ce qui suit : AVERTISSEMENT : Cancer et troubles de la reproduction – www.p65Warnings.ca.gov.