Installation Instructions

FormNo.3454-145RevA

BrickGuardKit

CompactToolCarrierwithAdjustableForks

ModelNo.147-2475

InstallationInstructions

Installation

PreparingtheMachine

1.Parkthemachineonalevelsurface.

2.Engagetheparkingbrake.

3.Lowertheloaderarms.

4.Shutofftheengineandremovethekey.

InstallingtheBrickGuardKit

Securethebrickguardtotheforkframeusing4carriagebolts(1/2x1-1/2inches)and4locknuts(1/2inch)as

showninFigure1.

g389244

Figure1

1.Brickguard

3.Carriagebolt

2.Locknut

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3454-145*

PAGE 1
Form No. 3454-145 Rev A Brick Guard Kit Compact Tool Carrier with Adjustable Forks Model No. 147-2475 Installation Instructions Installation Preparing the Machine 1. 2. 3. 4. Park the machine on a level surface. Engage the parking brake. Lower the loader arms. Shut off the engine and remove the key. Installing the Brick Guard Kit Secure the brick guard to the fork frame using 4 carriage bolts (1/2 x 1-1/2 inches) and 4 locknuts (1/2 inch) as shown in Figure 1. g389244 Figure 1 1. Brick guard 3.