Installation Instructions

FormNo.3452-420RevA

DamperKit

GreensPro

1260GreensRoller

ModelNo.144-3625

InstallationInstructions

Installation

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

ProcedureDescription

Qty.

Use

Nopartsrequired

–

Preparethemachine.

Damper1

Nut2

Installthedamperkit.

PreparingtheMachine

NoPartsRequired

Procedure

1.Connectthemachinetoatowvehicle;refertoyourmachineOperator’sManual.

2.Parkthemachineonalevelsurface,movethemotionpedalstotheNEUTRALposition,andengage

theparkingbrake.

3.Settheenginespeedtoidleandallowtheenginetorunfor10to20seconds.

4.TurntheengineOn/OffswitchtotheOFFpositionandwaitforallmovingpartstostopbeforeleavingthe

operator’sseat.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3452-420*

PAGE 1
Form No. 3452-420 Rev A Damper Kit GreensPro® 1260 Greens Roller Model No. 144-3625 Installation Instructions Installation Loose Parts Use the chart below to verify that all parts have been shipped. Procedure 1 2 Description Use Qty. No parts required – Prepare the machine. Damper Nut 1 2 Install the damper kit. 1 Preparing the Machine No Parts Required Procedure 1. Connect the machine to a tow vehicle; refer to your machine Operator’s Manual. 2.
PAGE 2
Installing the Kit Parts needed for this procedure: 1 Damper 2 Nut Procedure 1. Remove and discard the existing damper and 2 corresponding nuts (Figure 1). Note: For machines with serial number 410399999 and below, remove the weld nut on the front mounting bracket (Figure 1). Note: For machines with serial number 410399999 and below, drill out both of the existing mounting holes to 7/16 inch (11 mm) diameter.