Installation Instructions

FormNo.3446-579RevA

SpareTireMountKit

CompactToolCarrier

ModelNo.144-0105

InstallationInstructions

Installation

PreparingtheMachine

NoPartsRequired

Procedure

1.Parkthemachineonalevelsurface.

2.Lowertheloaderarms.

3.Engagetheparkingbrake.

4.Shutoffthemachineandremovethekey.

InstallingtheMount

Assembly

Partsneededforthisprocedure:

1Tire-mountassembly

1Bracket

4Bolt

4Locknut

Procedure

Installthetire-mountassemblyandbracketabovethe

loaderarmcrossbar.Torquetheboltsto91to113

N∙m(67to83ft-lb).

Note:Positionthebracketandmountassemblyso

thatthenotchesfacethecrossbar.

g354918

Figure1

1.Bolt(4)

4.Notch

2.Locknut(4)

5.Tire-mountassembly

3.Bracket

8111LyndaleAvenueSouth

Bloomington,MN55420Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3446-579*

PAGE 1
Form No. 3446-579 Rev A Spare Tire Mount Kit Compact Tool Carrier Model No. 144-0105 Installation Instructions 2 Installation 1 Preparing the Machine Installing the Mount Assembly Parts needed for this procedure: No Parts Required Procedure 1 Tire-mount assembly 1 Bracket 4 Bolt 4 Locknut 1. Park the machine on a level surface. 2. Lower the loader arms. 3. Engage the parking brake. Procedure 4. Shut off the machine and remove the key.
PAGE 2
3 Mount the Tire Parts needed for this procedure: 1 Tire (sold separately) 3 Lug nut Procedure Install a tire to the mount assembly using 3 lug nuts as shown.