Installation Instructions

FormNo.3435-290RevA

ChainKit

MH-400EH2MaterialHandler

ModelNo.140-2238

InstallationInstructions

Installation

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

ProcedureDescription

Qty.

Use

Nopartsrequired

–

Preparethemachine.

Chainbracket

Safetychain

Capscrew(1/2x6-1/2inches)

Washer2

Flangelocknut(1/2inch)

Installthechains.

PreparingtheMachine

NoPartsRequired

Procedure

1.Ifconnectedtoatowvehicle,engagethe

parkingbrakeforthetowvehicle,shutoffthe

engine,removethekey,andwaitforallmoving

partstostopbeforeleavingtheoperator’sseat.

2.Chockthetiresofthemachine.

3.Lowerthejackandsupportthemachine;referto

theOperator'sManualforthemachine.

Important:Thejackmustfullysupportthe

weightofthemachine.

4.Disconnectthemachinefromthetowvehicle.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3435-290*A

PAGE 1
Form No. 3435-290 Rev A Chain Kit MH-400EH2 Material Handler Model No. 140-2238 Installation Instructions Installation Loose Parts Use the chart below to verify that all parts have been shipped. Procedure Description Use Qty. 1 No parts required – Prepare the machine. 2 Chain bracket Safety chain Capscrew (1/2 x 6-1/2 inches) Washer Flange locknut (1/2 inch) 2 2 1 2 1 Install the chains. 1 Preparing the Machine No Parts Required Procedure 1.
PAGE 2
Operation 2 Connecting the Safety Installing the Safety Chains Chains to the Tow Vehicle 1. Assemble the machine to the tow vehicle; refer to the Operator’s Manual for the machine. 2. Assemble the spring hook of the right safety chain to the safety chain anchor point at the left side of the tow vehicle (Figure 2).