Installation Instructions

FormNo.3439-841RevA

TubServiceKit

MudBuggy

ModelNo.139-7216

InstallationInstructions

1.Parkthemachineonalevelsurface,engagetheparkingbrake,lowerthehopper,shutofftheengine,and

removethekey.

2.Removetheexistingtub.

3.Securethenewtubtotheframeusing4bolts,4washers,and4nuts.

g322995

Figure1

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3439-841*A

PAGE 1
Form No. 3439-841 Rev A Tub Service Kit Mud Buggy Model No. 139-7216 Installation Instructions 1. Park the machine on a level surface, engage the parking brake, lower the hopper, shut off the engine, and remove the key. 2. Remove the existing tub. 3. Secure the new tub to the frame using 4 bolts, 4 washers, and 4 nuts. g322995 Figure 1 © 2020—The Toro® Company 8111 Lyndale Avenue South Bloomington, MN 55420 Register at www.Toro.com.
PAGE 2
4. Using the new tub as a template, mark and drill 2 holes (9/16 inch). g322994 Figure 2 5. Install the remaining hardware to secure the tub to the frame. g322996 Figure 3 6. Torque the bolt to 37 to 45 N∙m (27 to 33 ft-lb).