Installation Instructions

FormNo.3396-989RevA

TipSwitchKit

TR-34DTrenchRoller

ModelNo.132-7169

InstallationInstructions

WARNING

CALIFORNIA

Proposition65Warning

ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato

causecancer,birthdefects,orreproductiveharm.

InstallingtheTipSwitch

PreparingtheMachine

1.Settheparkingbrake,openthehoodpanels,and

removetherightsidepanel;refertotheOwner’sManual

ofthemachine.

2.Disconnectandremovethebatteryandbatterybracket

(Figure1).

Important:Removethenegativeterminalrst.

Figure1

1.Boltssecuringthebatterybracket

3.Removethe4boltsonpanelholdingtheelectrical

terminalbox(Figure2).

Figure2

1.Bolts

4.Lifttheelectricalterminalboxandremovetheengine

wiringharness(Figure3).

Figure3

1.Enginewiringharness

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA.

AllRightsReserved

*3396-989*A

PAGE 1
Form No. 3396-989 Rev A Tip Switch Kit TR-34D Trench Roller Model No. 132-7169 Installation Instructions WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. Installing the Tip Switch Preparing the Machine 1. Set the parking brake, open the hood panels, and remove the right side panel; refer to the Owner’s Manual of the machine. 2.
PAGE 2
5. Remove the 8 bolts on the terminal-box cover (Figure 4). Figure 6 1. Bolt, washer, and star washer 2. Green and black wires 3. Red wire Figure 4 8. Connect the red wire to position 15 on the terminal strip (Figure 6). 6. Remove the existing tip switch and bracket. 9. Connect the battery and engine wiring harness (Figure 3). DANGER Important: Connect the positive terminal first. The tip switch for the machine contains mercury.