Installation Instructions

FormNo.3394-682RevA

DeluxeSeatKit

Zero-Turn-RadiusRidingMower

ModelNo.131-7699

InstallationInstructions

WARNING

CALIFORNIA

Proposition65Warning

ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato

causecancer,birthdefects,orreproductiveharm.

Installation

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

ProcedureDescription

Qty.

Use

Seatandseat-panassembly

1Installtheseatassembly.

Nopartsrequired

–

Testthesafety-interlocksystem.

InstallingtheSeatAssembly

Partsneededforthisprocedure:

Seatandseat-panassembly

Procedure

1.Tilttheseatup.

2.Disconnecttheharnessfromtheseatswitch.

g028954

Figure1

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA.

AllRightsReserved

*3394-682*A

PAGE 1
Form No. 3394-682 Rev A Deluxe Seat Kit Zero-Turn-Radius Riding Mower Model No. 131-7699 Installation Instructions WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. Installation Loose Parts Use the chart below to verify that all parts have been shipped. Procedure 1 2 Description Use Qty. Seat and seat-pan assembly 1 Install the seat assembly.
PAGE 2
3. Remove the existing seat and seat-pan from the machine (Figure 2). 5. Connect the seat switch (Figure 3). 4. Install the new seat seat-pan assembly to the frame with the seat rod, 2 hairpin cotter pins, and 2 spacers (certain models only) (Figure 2). g027695 Figure 3 2 Testing the Safety-Interlock System Figure 2 SW model shown 1. Existing seat and seat-pan 3. Hairpin cotter pin assembly 2. Spacers (certain models only) No Parts Required 4.
PAGE 3
Operation Positioning the Seat The seat can move forward and backward. Position the seat where you have the best control of the machine and are most comfortable.
PAGE 4