Use and Care Manual

ManualsBrandsToro ManualsMiscellaneous PartsTimeCutter Mounting Kit

FormNo.3397-120RevA

AttachmentMountKit

2011andAfterZero-Turn-RadiusRidingMower

ModelNo.131-3966

InstallationInstructions

WARNING

CALIFORNIA

Proposition65Warning

Thisproductcontainsachemicalorchemicals

knowntotheStateofCaliforniatocausecancer,

birthdefects,orreproductiveharm.

Safety

DANGER

Anenginebecomeshotwhileitoperates.Severe

burnscanoccurfromcontactinghotsurfacesof

theengine.

Allowtheengine,especiallythemufer,tocool

beforetouching.

ThefollowinglistcontainssafetyinformationspecictoToro

productsandothersafetyinformationyoumustknow.

•Becomefamiliarwiththesafeoperationoftheequipment,

withtheoperatorcontrols,andsafetysigns.

•Followthemanufacturer'srecommendationsforadding

orremovingwheelweightsorcounterweightstoimprove

stability.

•Slowdownanduseextracareonhillsides.Besureto

travelintherecommendeddirectiononhillsides.Turf

conditionscanaffectthestabilityofthemachine.Use

extremecautionwhileoperatingneardrop-offs.

•Keepallmovementonslopesslowandgradual.Donot

makesuddenchangesinspeed,directions,orturning.

•Usecarewhenloadingorunloadingthemachineintoa

trailerortruck.

•Keephandsandfeetawayfrommovingparts.Donot

makeadjustmentswiththeenginerunning.

•Stoponlevelground,disengagethedrives,chockor

blockthewheels,andshutofftheenginebeforeleaving

theoperator'spositionforanyreason.

TowingSafety

•Donotattachtowedequipmentexceptatthehitchpoint.

•Followtheattachmentmanufacturer'srecommendation

forweightlimitsfortowedequipmentandtowingon

slopes.

•Neverallowchildrenorothersinorontowedequipment.

•Onslopes,theweightofthetowedequipmentmaycause

lossoftractionandlossofcontrol.Reducetowedweight

andslowdown.

•Stoppingdistanceincreaseswiththeweightofthetowed

load.Travelslowlyandallowextradistancetostop.

•Makewideturnstokeeptheattachmentclearofthe

machine.

•Donottowaloadthatweighsmorethanthetowing

machine.

SafetyandInstructional

Decals

Safetydecalsandinstructionsareeasily

visibletotheoperatorandarelocatednear

anyareaofpotentialdanger.Replaceany

decalthatisdamagedorlost.

131-4036

1.Maximumdrawbarpull36

kg(80lb).

2.ReadtheOperator's

Manual.

OriginalInstructions(EN)PrintedintheUSA

AllRightsReserved

*3397-120*A

Summary of content (8 pages)

PAGE 1
Form No. 3397-120 Rev A Attachment Mount Kit 2011 and After Zero-Turn-Radius Riding Mower Model No. 131-3966 Installation Instructions WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. Towing Safety • Do not attach towed equipment except at the hitch point. • Follow the attachment manufacturer's recommendation for weight limits for towed equipment and towing on slopes.
PAGE 2
Installation Loose Parts Use the chart below to verify that all parts have been shipped. Description Use Qty. Stabilizer bracket (For 2015 and newer models) Carriage bolt (5/16 x 3/4 inch) Locknut (5/16 inch) Self-tapping screw (5/16 x 3/4 inch) Bolt (5/16 x 1 inch) Pivot frame Hairpin cotter Rod Washer Draw-bar decal 1 2 4 2 2 1 2 2 2 1 Install the attachment mount. Note: The stabilizer bracket is only used on 2015 and newer models (Figure 1). 2.
PAGE 3
Figure 3 1. Self-tapping screw (5/16 x 3/4 inch) Figure 5 Left side shown 2. Pivot frame 4. Attach the draw bar decal 1.3 cm (1/2 inch) to the left of the attachment mount (Figure 4). 1. Pivot frame hole 4. Support rod 2. Washer 5. Keyed slot, existing 3. Hairpin cotter 6. Bent, flared end of rod 6. Insert the bent ends of the rods into the attachment mount as shown in Figure 5 and secure the end of each rod with a washer and hairpin cotter.
PAGE 4
6 5 g032012 1 2 3 4 g030498 Figure 6 1 1. Machine frame 4. Bolt (5/16 x 2-1/2 inch) 2. Locknut (5/16 inch) 5. Pivot frame 3. Hole 6. Rear-engine guard (optional) Figure 8 1. Draw bar decal 4. Install a bent, flared end of a rod into the keyed slot in the left side of the machine frame, and move the rod rearward to seat it in the frame (Figure 9). 2. Secure the pivot frame to the bottom of the machine frame using 2 self-tapping screws (5/16 x 3/4 inch) as shown in Figure 7.
PAGE 5
Operation Note: Determine the left and right sides of the machine from the normal operating position. WARNING To avoid personal injury, follow these procedures: • Become familiar with all operating and safety instructions in the Operator's Manual for the mower before using this attachment. • Always shut the engine off and wait for all moving parts to stop before clearing an obstruction from the bagging system. • Never do maintenance or repairs while the engine is running.
PAGE 6
Notes: 6
PAGE 7
Notes: 7
PAGE 8
Notes: 8