Installation Instructions

ManualsBrandsToro ManualsBlades & Sharpeners42 in. Replacement Blade Kit for 42 in. TimeCutter (2007 and later)

FormNo.3393-667RevA

ReplacementBladeKit

TimeCutter

RidingMowerwith42inMower

ModelNo.131-3939-03P

InstallationInstructions

WARNING

CALIFORNIA

Proposition65Warning

ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato

causecancer,birthdefects,orreproductiveharm.

Installation

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

Description

Qty.

Use

Nopartsrequired

–

Removetheblades.

Blades2Installtheblades.

RemovingtheBlades

Note:Ifyourbladeshaveabladestiffenerasshownin

Figure1,donotusethebladestiffenerwheninstallingthe

newblades.

1.Disengagetheblade-controlswitch(PTO).

2.Stoptheengine,waitforallmovingpartstostop,and

removethekeybeforeleavingtheoperatingposition.

3.Holdthebladeendusingaragorthickly-paddedglove.

Removethebladebolt,curvedwasher,bladestiffener

(certainmodelsonly),andbladefromthespindleshaft

(Figure1).

Figure1

1.Sailareaofblade

4.Bladebolt

2.Blade

5.Bladestiffener—discard

(certainmodelsonly)

3.Curvedwasher

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA.

AllRightsReserved

*3393-667*A

Summary of content (2 pages)

PAGE 1
Form No. 3393-667 Rev A Replacement Blade Kit TimeCutter® Riding Mower with 42in Mower Model No. 131-3939-03P Installation Instructions WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. Installation Loose Parts Use the chart below to verify that all parts have been shipped. Description Use Qty. No parts required – Remove the blades. Blades 2 Install the blades.
PAGE 2
Installing the Blades Retain the blade stiffener for use with blades that require it. The replacement blades within this kit have a different design which do not require the stiffener (Figure 2). 1. Install the blade onto the spindle shaft (Figure 3). Important: The sail area (curved part) of the blade must be pointing upward toward the inside of the mower to ensure proper cutting. 2 G015201 1 3 1 5 4 3 2 4 6 g028369 Figure 2 1. Standard blade on models with blade stiffener 2.