Installation Instructions

ManualsBrandsToro ManualsSprayersSteering Return Hose Kit, Multi-Pro 5800 Turf Sprayer

FormNo.3375-521RevA

SteeringReturnHoseKit

Multi-Pro

5800TurfSprayer

ModelNo.121-5132

InstallationInstructions

Installation

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

Description

Qty.

Use

Hose1

Teetting

Hydraulicttingcap

R-Clamp

Installingthehose.

WARNING

Hydraulicuidescapingunderpressurecan

penetrateskinandcauseinjury.

•Makesurethatallhydraulicuidhosesand

linesareingoodconditionandthatallhydraulic

connectionsandttingsaretightbefore

applyingpressuretothehydraulicsystem.

•Keepyourbodyandhandsawayfrompin

holeleaksornozzlesthatejecthighpressure

hydraulicuid.

•Usecardboardorpapertondhydraulicleaks.

•Safelyrelieveallpressureinthehydraulicsystem

beforeperforminganyworkonthehydraulic

system.

•Getimmediatemedicalhelpifuidisinjected

intoskin.

InstallingtheHose

Note:Haveatrayreadytocatchanyhydraulicuidcoming

fromthehosesastheyarebeingremoved.

1.Turnoffthemachineandremovethekey.

2.Removethe4boltsfromtheengineshieldandlower

theshield(

Figure1).

g023679

Figure1

1.Engineshield

3.Removethehydraulichosefromthetubeassembly

andplacethehydraulicttingcapontheopenvalve

(Figure2).

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3375-521*A

Summary of content (2 pages)

PAGE 1
Form No. 3375-521 Rev A Steering Return Hose Kit Multi-Pro® 5800 Turf Sprayer Model No. 121-5132 Installation Instructions Installation Loose Parts Use the chart below to verify that all parts have been shipped. Description Use Qty. Hose Tee fitting Hydraulic fitting cap R-Clamp 1 1 1 2 Installing the hose. WARNING 1 Hydraulic fluid escaping under pressure can penetrate skin and cause injury.
PAGE 2
1 2 1 2 3 3 g023680 Figure 2 1. Hydraulic hose g023683 Figure 4 3. Hydraulic fitting cap 2. Tube assembly 1. Install 1 R-clamp on the under side the bracket. 2. R-clamps 4. Connect the hydraulic hose to the hose from this kit (Figure 3). 8. Install the engine shield. 1 2 3 4 g023682 Figure 3 1. Existing hydraulic hose 3. Hydraulic tank 2. Hydraulic hose from kit 4. Tee fitting 5.