Installation Instructions

Form No. 3324-932

Spool Carrier Kit

Part No. 104-2661

Installation

Instructions

Dingo



200/300 Series Compact Utility Loader

Loose Parts

Note: Use the chart below to identify parts for assembly.

DESCRIPTION QTY. USE

Spool carrier

Lynch pin, rectangular retainer

Mounting tube

U–bolt

Flange nut

Installing the spool carrier

Secondary spool carrier

Lynch pin, rectangular retainer

Installing the secondary spool carrier

Spool of wire (not included with the kit)

Washer

Lynch pin, semi–circular retainer

1 or 2

Installing spools

Brake strap

Brake cover

Installing the spool brakes

Installing the Spool Carrier

1. Place the U–bolt around the right loader arm, behind

and touching the crossbar, as illustrated in Figure 1.

PAGE 1
Form No. 3324-932 Dingo Spool Carrier Kit 200/300 Series Compact Utility Loader Part No. 104-2661 Installation Instructions Loose Parts Note: Use the chart below to identify parts for assembly. DESCRIPTION QTY. Spool carrier 1 Lynch pin, rectangular retainer 1 Mounting tube 1 U–bolt 1 Flange nut 2 Secondary spool carrier 1 Lynch pin, rectangular retainer 1 Spool of wire (not included with the kit) 4 Lynch pin, semi–circular retainer 2 Brake strap 2 Brake cover 2 1.
PAGE 2
Installing a Spool Brake (Optional) 9 6 5 4 If you have problems with the spools freewheeling and unwinding on the carrier, install the spool brakes. 9 7 7 1. Slide a brake cover over a brake strap (Fig. 2). 7 8 5 2 3 7 8 1 m–5337 Figure 1 1. 2. 3. 4. 5. U–bolt Mounting tube Flange nut Spool carrier Lynch pin with rectangular retainer 6. 7. 8. 9. Secondary spool carrier Washer Spool (not supplied) Lynch pin with semi-circular retainer 1 2 2.