Installation Instructions

FormNo.3407-201RevA

BenchSeatBaseKit

Workman

GTXSeriesUtilityVehicles

ModelNo.07135

InstallationInstructions

WARNING

CALIFORNIA

Proposition65Warning

ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato

causecancer,birthdefects,orreproductiveharm.

PreparingtheMachine

1.Parkthemachineonalevelsurface(boxAofFigure1).

2.Settheparkingbrake(boxBofFigure1).

3.Removethekeyfromtheignitionswitch(boxCofFigure1).

Figure1

InstallingtheSeatAssembly

1x1x2x2x2x

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3407-201*A

PAGE 1
Form No. 3407-201 Rev A Bench Seat Base Kit Workman® GTX Series Utility Vehicles Model No. 07135 Installation Instructions WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. Preparing the Machine 1. Park the machine on a level surface (box A of Figure 1). 2. Set the parking brake (box B of Figure 1). 3. Remove the key from the ignition switch (box C of Figure 1).
PAGE 2
Installing the Radio Mount 1x Drilling the Accessory Holes CAUTION When drilling holes into the seat base of the Workman GTX Electric Utility Vehicle, you can drill into the battery, spraying battery acid or resulting in electrical shock. Do not drill into the battery.
PAGE 3
Mounting the Accessory 1x 1x 3 4x
PAGE 4