Installation Instructions

FormNo.3371-491RevE
High-RiseKit
HoverPro400
ModelNo.02620
InstallationInstructions
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Extensionbumper1
Spacer
8
Nylonscrew8
Rubberwasher8
Nylonnut8
Installthekit.
Note:Pleaserefertothesafetyandoperatinginstructionsin
theOperator’sManualbeforettingandusingthiskit.
Thisproductadds35mm(1.4in)totheheightofcut.
1.Disconnectthewirefromthesparkplug.
2.Drainallthefuelandtheoilfromtheengine;referto
yourOperator’sManual.
3.TurnthefuelswitchtotheOffposition.
4.TurntheHoverProdeckupsidedownandsetblocks
underneaththedecktopreventitfromtilting.
WARNING
Thecuttingmechanismissharp;contacting
thecuttingmechanismmayresultinserious
personalinjury.
Keepawayfromthecuttingmechanismwhen
youturntheHoverProdeckupsidedown.
5.Installtheextensionbumperoverthedeckasshown
inFigure1.
6.Usetheextensionbumperasatemplateandmarkthe
locationofeachofthe8holesinthebumperextension
ontotheHoverProdeck.
7.Removetheextensionbumperanddrill8holes(8.5
mmdiameter)inthelocationsshowninFigure1.
8.SecuretheextensionbumpertotheHoverProdeck
usingthefastenersandspacersfrominthekitasshown
inFigure1.
Note:Usetherubberwasherstoholdthenylon
screwsinpositiontomaketheinstallationeasier.
Figure1
1.Nylonnut(8)4.ExtensionBumper(1)
2.HoverProdeck(1)5.Rubberwasher(8)
3.Spacer(8)6.Nylonscrew(8)
©2014—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUK
AllRightsReserved
*3371-491*E