Operation Instruction DS15W-WX Please read this operation instruction clearly before using the device. And keep it properly.
Thank you for purchasing and using this product! In order to bring your better using experience. Please read instructions of wireless devices while read this operation instruction. Product Specifications: Product Name DESU 15W Wireless Charger Model Number DS15W-WX Dimension (L*W)100mm*6.5mm Shell Material PC,Aluminum Input 5V 3A, 9V 2A,12V Charging Frequency 110KHz~205KHz Charging Range 4.00mm~6.00mm Charging Line Length 1.5m 1.
Product Introduction The optimal distance between the magnetic induction coil inside the mobile phone and the magnetic induction coil inside wireless charger is 4~6mm.
Direction for Use 1. Connect wireless charger to the power supply. 2. Place the phone in the sensor area to charge it after indicator light is on. NOTE: the charged device must meet the Qi standard to charge normally. Indicator Light Description 1. Indicator light is not on in standby mode. 2. Indicator lights up after switching on the power. Indicator lights out after two seconds. 3. Indicator light is always on while charging normally and multi-color breathing patterns. 4.
Warranty Card Customer Name:___________________________________(Sir/Madam) Contact Number :_________________________________ Address:___________________________________________ Serial-number:_____________________________________ Product Model:_____________________________________ Purchase Date:_____________________________________ Purchase Store:____________________________________________ Store Address:_____________________________________________ Invoice Number:____________________________________________
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference. (2)This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.