Product Guide

ManualsBrandsTOPWAY EM ManualsAudio EquipmentMOVE WIRELESS EARBUDS WITH MIC

BT EARBUD 18LY48

Activate the Bluetooth and select

‘BT EARBUD 18LY48’

in the Settings of your device

Press and hold

2 sec

Press and hold

5 sec

when power oﬀ

LED will ﬂash red

and blue when ready

to pair

BT EARBUD 18LY48

1) Product Name: Wireless earbuds with mic;

2) Pairing Name: BT EARBUD 18LY48

3) Speaker Rated Power Input: 3mW(0.31V);

4) Speakdr Maximum Input Power: 5mW(0.40V);

5) Loudspeaker Diameter:Φ10mm;

6) Speaker Impedance: 16±15% Ω;

7) Sensitivety: 93±3dB;

8) Charging Cable: 0.3m

Product Information

3 Earbud

Sizes

Bluetooth In-Ear Headphone

Model: 18LY48

PRODUCT GUIDE

Ver.01 12/11/18

Ver.01 12/11/18 Ver.01 12/11/18 Ver.01 12/11/18 Ver.01 12/11/18

Ver.01 12/11/18 Ver.01 12/11/18 Ver.01 12/11/18

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modiﬁcations to this device not explicitly approved by manufacturer could void

your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement. The device can be used in

portable exposure condition without restriction.

Ver.01 12/11/18

Phone Controls

Hang up

Press & Hold 1S

Siri/Google Assistant

Charging

(Solid blue)(

Solid red

)

Charging Complete

2 Hours

Full Charge

Headphones fail to turn on

Headphones fail to charge

After successfully pairing, headphones disconnect

MOVE WIRELESS EARBUDS WITH MIC