Installation Instructions

Device Connection
TuyaSmart
User Guide
This manual is for reference only.
The App will be modified as the version is updated.
Buzzer Matching Space (this device needs to be purchased separately)
Matching: Press and hold the buzzer volume key for 4 seconds,The LED Light will turn ON. Next, press the doorbell button for 5 seconds. When the buzzer LED blinks quickly, the matching is complete. Reset: Press and hold the buzzer volume key for 10 seconds. The matching will reset.
Thanks for choosing our product. Please scan the following QR code to install the app on you phone, then set your device by following steps after it’s done.
App Installation
Scan the QR codes below or Seach “TuyaSmart” from App Stroe (for iOS devices)/Google Play Store (for Android smart phones) to download and install the App.
1920*1080 (Matching)
Set up your video doorbell in the
Smart Doorbell
TuyaSmart
TuyaSmart
Equipment
(including Mounting Bracket)
Two 18650 Battery
Security Screw
The infrared light will turn on automatically when the ambient light is Insufficient
Quick Start Guide
IR LED PIR Light Sensor
Package List
Appearance Introduction
It’s used to collect ambient light values when the luminance is lower than 2Lux, infrared light will be enabled automatically. When human body moved in front of the equipment, the equipment will make notification to your mobile phone.
Radar (optional)
When the human body moves in front of the device, the radar generates a trigger signal to the mobile phone
Lens IR LED
Indicator Light
Radar
PIR
Speaker
MIC Light Sensor
Lens Indicator Light MIC
To gather the environmental sounds and realize
Speaker
System sound and voice intercom
Mounting bracket holes
Use bracket mounting screws to mount the bracket to the wall voice-voice intercorn.
Video image capture Blue light flashes ---- Pairing Status Red light on ---- Failed WIFI Connection Blue light on ---- Connected Successfully Red & Blue light on together ---- Connecting WI-Fi
Installation Guide
Install the base on the wall using the mounting screw in the accessory package
1
2
Align the mounting bracket holes of the machine with the base screws for installation
3
Toggle the power ON / OFF to turn the camera on or off
4
Micro USB interface a. Garden light output port b. Solar charging output port
POWER
(ON/OFF)
TF card slot
RESET
USB
TF card slot, install TF card for video storage6
5 Press the reset button for 5 seconds, waiting
for the indicator light turn to red slow flash (The equipment should be in working condition, long press, sleep state is invalid)