User Manual Wireless touch keyboard User Manual V1.
Welcome USING THE GYRO PRESENTER There are two modes of this product. Mouse mode: You can use mouse function and multi-touch function. Keyboard mode: Keyboard function is available. Power / Mode Button Use the button to change modes and turn on/off device. 1. 2. 3. 4. Press this button to turn on device. Press and hold this button for 3 seconds long to turn off device. After turn on the device, press this button to change mode. If green LED is on, it means device is in mouse mode. 5.
Mouse mode Mouse and multi-touch functions are available in this modes. Please refer to the tables below.
Keyboard mode Keyboard layout: 3
Recharging Please use mini USB cable to recharge device. Recharging status indicator When you recharge device, the indicator will be on like the image below. When the recharging is done, the indictor will be off.
Pairing Please pair the presenter and receiver before the first usage. 1. Press the connect button on the receiver first and the blue LED will flash slowly. 1. After step 1., press and hold the power switch for 5 seconds, during the device is off. 2. The blue LED of receiver will flash quickly, after success pairing.
※ Warning: 15.21 CAUTION: any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 15.105Federal Communications commission (FCC) Requirements, Part 15 This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
7
