User's Manual

MI‐S006BPORTABLEWIRELESSSPEAKER
USERMANUAL
(Readbeforeproceeding)



PowerOn/PowerOff,Chargingandlowbatterypowerwarning
 Pressandhold“M”buttonfor3seconds,topoweronthisunit.
 Pressandhold“M”buttonfor3seconds,topoweroffthisunit.
 The
item should come with enough power be powered on. If you are having trouble on pairing or powering‐on it,
pleasemakesureitisfullycharged.
 Use the USB charge cable connecting to the item from its micro charging socket to your computer or charger. The
charginginputpower
is5V400mah.
 Theredlightwillturnoffwhenpowerchargingcompletes.
 Whenpoweristoolowertokeeptheitemoperating,awarningpromptsound“BeepBeepBeep”willbeheard.Then
youshouldchargetheitemintime.

MusicPlaying:
BluetoothMode:

 Oncepoweron,theitemturnsdefaultintoBluetoothMode,whilethereisnootherconnection.
 TheitemwillautomaticallyconnecttothelastBluetoothdevicefirst.Ifnotfound,itwillsearchanewone.
 IftheLEDbluelightflashesatintervals,itmeansready
topair.
 OntheBluetoothdevice,switchonBluetoothsettingandsearchfor“MERKURYS006B”.Forthefirst‐timeconnection,
select “MERKURY S006B” to start connection. If necessary, enter the pass code 0000 or 1234. Once connect
successfully,theLEDbluelightkeepsonallthetime.
 Todisconnect
theitemfromcurrentBluetoothdevice,switchoffBluetoothfromcurrentBluetoothdevice.
 Onceconnected,youcanlistentomusicfromtheitemwirelessly(<33ft.).Themusicstreamingmaybeinterrupted
byobstaclesbetweenthedeviceandtheitem,suchaswalls,metalliccasingthatcoversthe
device,orotherdevices 
nearbythatoperateinthesamefrequency.
 Press“Play/Pause”buttononetimetoplayorpausethemusic.
 Press“Forwards”or“backwards”buttononetimetoskipsongs.
 Pressandhold“Forwards”or“backwards”buttontoadjustvolume.
 Press“M”buttonto
changetoothermodes.

TWSconnection
 KeepbothtwospeakersturnonandnoBluetoothconnection.
 Pressandhold“Play/Pause”buttonfromoneofthespeakersuntillyouhearaprompt“Dee”andthentheitementers
searingprocessandwillconnecttoanotherspeakerautomatically.
 Once
connectingsuccessfully, youwillhear aprompt.LEDlighton oneof thespeakerswill keeponall thetime and