TOPFLYtech TLW1-10A(E) Vehicle GPS Tracker User Manual Revision 1.
Thanks for your purchasing of the high-quality GPS tracker from TOPFLYtech. Please read this user manual carefully before installation and operation. Information in this manual is the property of TOPFLYtech. Changes to the specifications and features in this manual may be made by TOPFLYtech without prior notice. No part of this manual could be reproduced, copied, translated, transmitted, or published in any form or by any means without TOPFLYtech's prior written permission.
Contents 1. QUICK REFERENCE OF CONNECTION DIAGRAM .......................................................................5 2. PRODUCT SPECIFICATIONS ..............................................................................................................6 3. STANDARD ACCESSORIES INTRODUCTION ................................................................................7 4. LED INDICATOR ............................................................................................................
11.11 TOWING SETTING.................................................................................................................................... 14 11.12 SPEED LIMIT SETTING.............................................................................................................................. 14 11.13 SMS TRACKING MODE SETTING ........................................................................................................... 14 11.14 SIM CARD BALANCE CHECKING ...................
1.
2. Product Specifications LTE Specifications Operating Band TLW1-10A FDD: B1/B2/B3/B4/B12/B13/B17/B25/B28 TDD: B39 (Cat M1 only) TLW1-10E FDD: B1/B2/B3/B4/B5/B8/B18/B19/B20/B26 EGPRS 900/1800MHz Certification FCC: B2/B4/B12/B13/B25 (Cat M1) Data Transmission eMTC: Max. 300Kbps (DL), Max. 375Kbps (UL) NB1: Max. 32Kbps (DL), Max. 70Kbps (UL) EDGE: Max. 296Kbps (DL), Max. 236.8Kbps (UL) GPRS: Max. 107Kbps (DL), Max. 85.
Operating Temperature -30℃ ~ +80℃ (-22°F ~ 176°F) Storage Temperature -40℃ ~ +85℃ (-40°F ~ 185°F) Air Interface Protocol Transmit Protocol TCP, UDP, MQTT, SMS Protocol Check & Encryption Support MD5/ AES256 Scheduled Timing Report Report position and status at preset intervals Geo-fence Geo-fence alarm and parking alarm support up to 64 internal geo-fence regions Low Power Alarm Alarm when backup battery is low Power on Report Report when the tracker is powered on Tow Alarm From internal 3-
5. Installation Guide 5.1 SIM Card Pre-Installation Note 5.1.1 SIM card data service should be enabled. 5.1.2 If SIM card is locked via PIN, please unlock it first. 5.1.3 Ensure there is sufficient balance in the SIM card. 5.2 Installation 5.2.1 Ask the technician recommended by your dealer to do the installation. Ensure the tracker top side (with TOP SIDE logo on) face upward. Fix the tracker with our standard double-side adhesive tape. 5.2.
8. Tracker Operation 8.1 Power on and off 8.1.1 Power on: Insert a SIM card and connect the tracker to external power. It will turn on automatically. 8.1.2 Power off: Remove the SIM card first, then disconnect the tracker from external power. It will power off automatically around 5~10 seconds. 8.2 Location Search 8.2.1 SMS Query Send a location inquiry SMS command (refer to the Operation Command in this manual) to the tracker. The location information will be sent to you through SMS. 8.2.
max data usage volume. 9.3 Unable to locate 9.3.1 Is the top side (with TOP SIDE logo on) facing upwards without shielded by metallic things during the installation? 9.3.2 Does the vehicle enter an area with no satellite coverage? 9.4 Location Drift In an area with poor GNSS signal (like the areas with lots of high buildings), location drift may happen. When move to open area, the drift will no longer exists. 9.5 No Command Reply 9.5.1 Check the command format. Make sure it’s correct. 9.5.
Towing Setting DRAG,Current PIN,Distance# Speed Limit Setting SPEED,Current PIN,Upper Speed Limit# SMS Tracking Mode TRACK,Current PIN,SMS Tracking Time# SIM Card Balance Checking FORWARD,Current PIN,Service Center Number,SIM Card Credit Checking Command# Relay Control (Fuel Cut) RELAY,Current PIN,Relay Status(On/Off)# Google Map Search GOOGLE,Current PIN# Forgot the PIN MYSELF# 11.
Range: Positive Integer Length Limit: 0~65535 Note: Tracker will return “SET IP OK” when received this command. 11.
Time Zone: Range: Floating point Range Limit: -12.0 ~ 12.0 Default: 8.0 Note: Tracker will return “SET GMT OK” when received this command. 11.6 PIN Setting PASSWORD,Current PIN,New PIN# PIN: Range: Letters and Numerals Length Limit: 1 ~ 10 Default: 0000 Note: Tracker will return “SET PASSWORD OK” when received this command. 11.
Note: 1) Tracker will return “SET MANAGERL OK” when received this command. 2) All the manager phone numbers will be listed. 11.10 Antitheft Setting ANTITHEFT,Current PIN,Antitheft Switch(On/Off)# Antitheft Switch: Range: Positive Integer Range limit: 0 or 1 Default: 0 Note: 1) Tracker will return “SET ANTITHEFT OK” when received this command. 2) This function is effective only when ACC is off 11.
Range: Positive Integer Range limit: 0, 1, 2 ~ 65535 Minutes Default: 0 Note: 1) Tracker will return “SET TRACK OK” when received this command. 2) 0: Network tracking mode. 3) 1: Disable the tracking function. No data will be sent out to the server. 4) 2~65535: Time interval of SMS sending to manager phone in SMS tracking mode. 11.14 SIM Card Balance Checking FORWARD,Current PIN,Service Center Number,SIM Card Credit Checking Command# Note: 1) Tracker will return “SET FORWARD OK” when received this command.
1) If the manager phone number has been set, only the manager can use “MYSELF#”. If no manager setting, the tracker will return the IMEI and current PIN when it received “MYSELF#” from any mobile phone. 2) This command can be used to retrieve password. 12.
TSR1-B Bluetooth 5.0 Wireless Relay 13. FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.