User's Manual

Tighten the Wheel Magnet onto spoke and align with sensing point on sensor.
3
Unscrew the wheel magnet to
install on spoke.
Pre-fit Sensor and Rubber Bracket on left rear
chainstay (non-drive side) and trim excess rubber
from bracket. Insure the Topeak logo is facing up.
Install zip ties loosely to allow sensor placement.
2
EN
Cadence Sensor
Sensing Point
Speed Sensor
Sensing Point
Green Light
Blinking
50 times
Sensing Indicator
Low Batter
Indicator
Cadence Magnet
Holder
Zip Tie
Rubber
Bracket
Cadence Magnet Set (A)
for pedal axle hexagon socket
Speed Magnet Set
Rubber Bracket Set
Cadence Magnet Set (B)
for crankarm
Zip Tie
Rubber Pad
Sync to PanoBike App and other Apps with
Bluetooth® Smart (BLE 4.0) connection program.
ANT+ system for Garmin or other devices.
INSTALLATION
TIPS : Proper distance between Sensor and Magnet : < 10 mm
Install Cadence Magnet on left crankarm near pedal as
shown. Do not tighten zip ties completely to allow
magnet placement.
Cadence Magnet Set (B)
OPTION
A
OPTION
B
Top View
1
IMPORTANT NOTE
Align Wheel Magnet with Speed
Sensor Sensing Point as shown
to insure magnet does not
interfere with Cadence Sensor.
IMPORTANT NOTE
Align Cadence Magnet with Cadence Sensor
Sensing Point as shown to insure magnet
does not interfere with Speed Sensor.
Speed Sensor
Sensing Point
Top View
Cadence
Magnet
Cadence Sensor
Sensing Point
Cadence Sensor
Sensing Point
Cadence
Magnet
User's Guide
DUOBAND SPEED & CADENCE SENSOR
Top View
Cadence Magnet Set (A)
IMPORTANT NOTE
Align Cadence Magnet with
Cadence Sensor Sensing
Point as shown to insure
magnet does not interfere
with Speed Sensor.
For Round Spokes
For Bladed Spokes
12 x 3 mm
Cadence Magnet
3 mm
Red Light
Blinking
50 times