ArtiDiag Pro Professional Diagnostic Tool USER MANUAL
CONTENTS Welcome.......................................................................................................... 1 About.................................................................................................................. 1 What's Included.......................................................................................... 1 Technical Specification......................................................................... 2 Compatibility.............................................
WELCOME Thank you for purchasing the TOPDON ArtiDiag Pro, an automotive diagnostic tool. Please read manual prior to operation. ABOUT The TOPDON ArtiDiag Pro is an ideal diagnostic tablet designed to work on all available electronic systems. Beyond OBD2 diagnostics, the user can expect AutoVIN technology to accelerate diagnostic work, and the well-organized interface can run reset services for effective vehicle maintenance. WHAT'S INCLUDED 1. ArtiDiag Pro 2. Diagnostic Cable 3. Smart OBD II-16E Adaptor 4.
TECHNICAL SPECIFICATION Display: 7-inch 1024*600 Touchable Screen RAM: 2G ROM: 32GB OBDII Input Voltage Range: 9~18V Charging: 5V DC, or through connection to vehicle’s DLC Working Temperature: 14°F to 122°F (-10°C to 50°C) Storage Temperature: -4°F to 158°F (-20°C to 70°C) COMPATIBILITY TOPDON ArtiDiag Pro is compatible with the following: KWP2000 • ISO9141 • J1850 VPW • J1850 PWM • CAN (Controller Area Network) • And more • NOTICE ArtiDiag Pro may automatically reset while being disturbed by strong stat
GENERAL INFORMATION OF OBDII The OBDII system is designed to monitor emission control systems and key engine components by performing either continuous or periodic tests of specific components and vehicle conditions, which will relay the following information: • Whether the Malfunction Indicator Light (MIL) is commanded “on” or “off”; • Which, if any, Diagnostic Trouble Codes (DTCs) are stored; • Readiness Monitor status.
PRODUCT OVERVIEW 4
NO. Descriptions Name 1 5V DC Charging Port To charge the tablet. 2 DB-15 Diagnostic Connector To connect to the diagnostic cable. Power/Lock Button • Hold the button for 5 seconds to turn the tablet on. • Hold the button for 3 seconds to turn the tablet off. • Press the button to wake up the screen or turn off the screen. 4 Charging LED Battery below 20% indicates low battery. Battery above 20% indicates normal battery. • For low battery, it illuminates red and flashes when being charged.
PREPARATION & CONNECTION 1. Turn the ignition off. 2. Locate the vehicle’s DLC socket. 3. Connect one end of the diagnostic cable to the DB-15 port on the ArtiDiag Pro and tighten the captive screws. 4. Select the appropriate adaptor for vehicle's DLC connector. Connect the adaptor to the other end of the diagnostic cable and tighten the captive screws. 5. Plug the adaptor to vehicle's DLC connector. 6. Turn the ignition on. The engine can be off or running. 7.
*Note: Don’t connect or disconnect any test equipment with the ignition on or engine running. 8. Language Setting Select the tool language in the following interface: 9. Choose Time Zone Choose the time zone of your current location. The system will automatically configure the time according to the time zone you selected.
10. Connect Wi-Fi The system will automatically search all available Wi-Fi networks. You can choose the Wi-Fi needed. *Note: Since the first use of the scanner requires data interaction with the server to activate it, the first use must connect to WIFI; otherwise, the diagnostic software will not be able to use, but after the activation of the scanner, the diagnostic function can be used in the offline state. 11.
12. User Agreement Please read all the terms and conditions of the user agreement carefully. Check “Agree all the above terms” and tap “Next” to complete the registration process. It will automatically jump to the Home Menu.
OPERATION INTRODUCTION TOPDON ArtiDiag Pro has 8 major modules, including Diagnose, Services, OBD II, I/M, Battery Voltage, Upgrade, Data, and Settings. 1. Diagnosis TOPDON ArtiDiag Pro supports Smart Diagnosis and Manual Diagnosis covering OBDII diagnosis, full system diagnosis for most modern vehicles worldwide. A diagnostic report will be automatically generated after the diagnosis. 1.1 Smart Diagnosis (Auto-Detect) Power on the ArtiDiag Pro.
display as follows: Input the VIN and tap “OK”; the system will automatically identify the vehicle model. If the VIN is successfully decoded, it will perform Smart Diagnosis until a diagnostic report is automatically generated. Otherwise it will enter the Manual Diagnosis mode. *Note: • A highly stable and solid network connection is recommended for successful VIN access.
Select “Diagnose” Select Vehicle Manufacturer Select Vehicle Model Select Scan Mode Automatic System Detection (System Scan) Manual System Detection (System Selection) Select Test Function Read Version Read Fault Clear Fault Read Data Information Code Code Stream Actuation Test Special Function *Note: • Before diagnosing, please make sure the corresponding vehicle manufacturer software has been installed in the scanner. • The diagnostic menu may vary by the vehicle’s make, model, and year.
Take “Demo V15.43” as an example to demonstrate how to manually diagnose a vehicle. Tap “OK” to continue. The following screen will appear: Take “NISSAN” as an example to continue.
1.2.1 Health Report (Quick Test) This function enables you to quickly access all electronic control units of the vehicle and generate a detailed report about vehicle health. Tap “Health Report”, and the system will start scanning the ECUs. Once the scanning is complete, the following screen will appear: The system with fault codes will be displayed in red ( with no fault codes will be displayed in green ( ). ).
1.2.3 System Selection (Manual System Detection) This function allows you manually select the system and perform the related diagnostic functions. Tap “System Selection”, and then select the desired system (take “ENGINE” for example). The following screen will appear: a. Version Information This function can read the version information of system mode, vehicle VIN, software and ECU. b.
*Explanation of terms: • Freeze Frame: A snapshot of critical parameter values at the time the DTC occurs. • Help: To view the help information. • Code Search: To search for more information about the current DTC online. • Report: To save the current data in text format. All diagnostic reports can be accessed from “Data” -> “Diagnostic Report”. c. Clear Fault Code This function can erase the codes from the vehicle.
After selecting the desired items, tap “OK” to enter the data stream reading page. The system will display the selected data streams in 3 modes available: 1) Value (default): Shows parameters with numbers and lists. 2) Figure: Displays parameters with wave patterns. 3) Combine: The graphs can be merged for easier comparisons. Tap to view the parameters in wave patterns: Tap “Combine” to merge values in waveform for easier comparisons. Maximum 4 values can be selected at the same time.
Tap “Report” to save the current data as a diagnostic report. All diagnostic reports can be accessed from “Data” -> “Diagnostic Report”. Tap “Record” to record and save the Live Data as valuable information to help troubleshoot and diagnose. All diagnostic records can be accessed from “Data” -> “Diagnostic Record”. e. Actuation Test This option is used to access vehicle-specific subsystem and component tests. Available tests vary by vehicle manufacturer, year, and model.
selections to complete the test. Each time when an operation is successfully executed, "Completed" will display. f. Special Functions This option offers coding, reset, relearn, and more service functions, to help vehicles get back to functional status after repair or replacement. Available tests vary by vehicle manufacturer, year, and model. Some special functions can also be accessed by tapping the "Services" on the Home Menu. 1.
After that, reset the driving mileage or driving time, so as to turn off the service lamp, and enable a new driving cycle. • If the service lamp is not on, but you have changed the engine oil or electric appliances that monitor oil life, you need to reset the service lamp. 2.2 Steering Angle Reset (SAS Reset) This function can reset the steering angle to zero to keep the car running straight.
It needs to be performed in the following cases: • When the ABS contains air. • When the ABS computer, ABS pump, brake master cylinder, brake cylinder, brake line, or brake fluid is replaced. 2.6 Throttle Matching (ELEC. THROTTLE RLRN) This function initializes the throttle actuator so that the learning value of the ECU returns to the initial state. By doing so, the movement of the throttle (or idle motor) can be more accurately controlled, thus adjusting the intake volume.
• Repair and replacement of the DPF regeneration control module. 2.9 Anti-theft Matching (IMMO) This function can match the anti-theft key after replacing the ignition key, ignition switch, instrument cluster, engine control unit (ECU), body control module (BCM), and remote control battery. 2.10 Tire Pressure Reset (TPMS RESET) This function can reset the tire pressure and turn off the tire pressure fault indicator when the car tire pressure fault indicator light is on. 2.
2.16 A/F Reset This function is applied to set or learn air/fuel rate parameters. EN 2.17 EGR Adaption This function is used to learn the EGR (Exhaust Gas Recirculation) valve after it is cleaned or replaced. 2.18 AC System Relearn/Initialization AC system relearn/initialization must be performed when the vehicle AC ECU or actuator is replaced or the ECU memory is lost. 2.19 AdBlue Reset After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required. 2.
2.26 Transport Mode To lower vehicle power consumption, user may perform the following operations: limit vehicle speed, not wake up the network for door open and disable remote key etc. In this case, deactivating transport mode is needed to recover vehicle being normal. 2.27 Tyre Reset This function is used to set the size parameters of the modified or replaced tire. 2.
3. OBDII/EOBD Diagnostics This function presents a quick way to check for DTCs, isolate the cause of the illuminated Malfunction Indicator Lamp (MIL), check monitor status before emissions certification testing, verify repairs, and perform other services that are emission-related. Tap “OBD II” in the Home Menu after the tablet is properly connected to the vehicle’s DLC port.
3.2 Read Live Data This function retrieves and displays live data and parameters from the vehicle’s ECU. 3.3 Read Freeze Frame This function takes the snapshot of the operating conditions when an emission-related fault occurs. 3.4 Read Fault Code This function can identify which section of the emission control system has malfunctioned. 3.5 Clear Fault Code This function erases the codes from the vehicle, after retrieving codes from the vehicle and certain repairs have been carried out.
6. Upgrade A number will be displayed upon the “Upgrade” module in the Home Menu indicating a new version of software is available. It is strongly suggested to update the software on regular basis for more functions and better service. Once the download is finished, the software packages will be installed automatically. *Note: Stable and solid network connection is required. 7. Data Tap “Data” in the Home Menu. The following screen will appear: 7.
*Explanation of terms: • Graph: Display parameters in waveform graphs. • Combine: Merge graphs for data comparison. Items will be in different colors. • Value (default): Display the parameters as text in a list format. • Auto Playback: Automatic playback of the selected data stream items. When in Auto Playback mode, the bar will change to “Frame Playback”. 7.2 Diagnostic Report This module stores all diagnostic reports generated in the process of vehicle diagnostics. 7.
7.4 DLC (Data Link Connector) Location This function helps you to find the location of the vehicle’s DLC. 7.5 Feedback This function allows you to send the feedback of your diagnostic problems to us for further analysis and troubleshooting. There are 3 options: 1) Diag. Feedback: To send a tested vehicle diagnostic feedback. 2) History Feedback: To view all diagnostic feedback records.
8. Settings 8.1 Units of Measurement This option can set the measurement unit. Metric System and Imperial System are available. 8.2 Screen Capture This option can set the Screen Capture icon to be shown or not on the screen. 8.3 Automatic detection on connect This option enables you to determine whether to start an automatic VIN detection once the tool is properly connected to the vehicle’s DLC. 8.4 Display/Brightness This option allows you to set the standby time and screen brightness. 8.
*Note: After switching the language, please re-download all diagnostic software, otherwise the system will use the English software by default. EN 8.9 Exipration Date This option allows you to check the expiration date of the diagnostic software and renew the software subscription. 8.10 E-mail This option can set up the default email address for receiving the diagnostic reports or screenshots. 8.10 Recovery This option can reset the tool to the default factory setting. 8.
WARNINGS • Always perform automotive testing in a safe environment. • DO NOT smoke near the vehicle during testing. • DO NOT place the diagnostic tool near the engine or exhaust pipe to avoid damage from high temperatures. • DO NOT wear loose clothing or jewelry when working on an engine. • DO NOT connect or disconnect any test equipment while the ignition is on or the engine is running. • DO NOT disassemble the code reader. • Engine parts will become hot when the engine is running.
FAQ EN Q: System halts when reading the data stream. What is the reason? A: It may be caused by a slackened connector. Please turn off the tablet, firmly connect the connector, and switch it on again. Q: Screen flashes at engine ignition start. A: Normally caused by an electromagnetic disturbance. Q: There is no response when communicating with the on-board computer.
WARRANTY TOPDON's One Year Limited Warranty TOPDON warrants to its original purchaser that the company's products will be free from defects in material and workmanship for 12 months from the date of purchase (Warranty Period). For the defects reported during the Warranty Period, TOPDON will either repair or replace the defective part or product according to its technical support analysis and confirmation.
FCC Statement: EN FCC ID: 2AVYW-ADPRO This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
– This radio is designed for and classified as “General population/uncontrolled Use”, the guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.The exposure standard for wireless radio employs a unit of measurement known as the Specific Absorption Rate, or SAR, the SAR limit set 1.