0-JUNE-2011 RF-10 User Manual Confidential TOPCON CORPORATION RF-10 User Manual Rev.
10-JUNE-2011 List of Contents 1. General 1.1 1.2 1.3 1.4 1.5 1.6 Overview Features Application Interface connecter pin assignment Outline View Package Dimensions 2. Characteristics 2.1 Electrical Characteristics 2.2 RF Characteristics 3. Notes TOPCON CORPORATION RF-10 User Manual Rev.
10-JUNE-2011 1 General 1.1 Overview This specification covers RF-10 Data Radio Unit, which complies with ARIB STD T-66, FCC Part 15 247 RSS-210 and ETSI EN 300 400. This unit consist of Texas CC2500 radio IC and for Radio Data communication in 2.4GHz band. All detailed specification may be changed without notice. 2.4GHz Antenna CC2500 TEXAS RADIO IC UART Interface TOPCON CORPORATION RF-10 User Manual Rev.
10-JUNE-2011 1.2 Features • • • • • • • Radio Data rate up to 32kbps. Support Slow Hopping 22channels in 2.401GHz ~ 2.479.75GHz Ultra Low Power Consumption RoHS Compliant Support USART connection speed up to 115.2kbps Small Package Size (38.7 x 19.0 x 5.9) Integrated 26MHz Crystal Unit 1.3 Application • • • • Radio Data Modem Wireless Controller Wireless Data Logger Wireless Security Sensor 1.4 Interface connecter pin assignment TOP Side View of RF-10 1 2 3.4. GND (Power GND) 5.6.
10-JUNE-2011 1.5 Outline View Pattern Antenna Interface connector 1.6 Package Dimensions 38.7 5.9 19.0 Left Side View Top View Right Side View Side View Weight 6g TOPCON CORPORATION RF-10 User Manual Rev.
10-JUNE-2011 2. Characteristics 2.1 Electrical Characteristics Absolute Maximum Rating Rating Minimum Typical Maximum Unit Supply Voltage 3.2 3.5 6.5 V Operating Temperature Range -20 25 55 C RX Current consumption 36 mA TX Current consumption 40 mA Min. Typ. Max. -1dBm 2.47975 0.1 0.05 2.5ppm Typ. Max. -90dBm -20dBm 2.
10-JUNE-2011 3. Notes FCC Statements: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
10-JUNE-2011 IC Statements: The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met. This device complies with RSS 210 of Industry Canada “IC”. “Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
